Fuji Spray · Turbine only
Six stages.
On its own.
The turbine from Fuji's D6, its most powerful HVLP system, sold without a gun or hose. Six stages and up to 11.5 psi atomize heavy coatings with less thinning, with Smart Select pressure settings and foam plus HEPA filtration.

Fuji D6 6-Stage HVLP Turbine Only, 1206C
Couldn't load pickup availability
The Fuji D6 turbine (1206C) from Fuji's most powerful HVLP system, sold on its own. Six stages build up to 11.5 psi, so heavier coatings atomize with less thinning. It has a Smart Select control panel with six pre-set pressures and 2-stage foam and HEPA filtration. Turbine only: the gun and hose are not included.
Key Features & Benefits
- Up to 11.5 psi: Six stages build the most pressure Fuji makes, so heavier coatings atomize with less thinning.
- Smart Select control panel: Six pre-set pressure settings. Start low and step up for heavier coatings.
- Foam + HEPA filtration: Cleaner, drier air at the gun, with a check filter light that tells you when to change filters.
- Designed and assembled in Canada: By Fuji Spray, the Canadian HVLP maker.
- Heavy coatings: Cabinet enamels, primers and high-solids coatings, plus lacquer, stain and polyurethane.
- Production ready: Made for cabinet shops, millwork and contractors spraying on site.
What's Included
- D6 6-stage turbine (1206C)
- Gun and hose are not included
Compatibility
Fuji pairs the D6 with its T75G, T70 and G-XPC guns. It uses the 7073 Super Duty 30 ft hose. Replacement D6 filters are in stock.
Product Specifications
| Part number | 1206C |
| Turbine | 6-stage motor, up to 11.5 psi sealed pressure |
| Controls | Smart Select control panel with 6 pre-set pressure settings |
| Filtration | 2-stage foam and HEPA, with check filter light |
| Voltage | 110 V |
| Size | 18 × 15 × 11 in |
| Weight | 25.57 lb |
| Hose | 7073 Super Duty 30 ft hose, sold separately |
| Included | Turbine only. Gun and hose sold separately |
| Made in | Designed and assembled in Canada |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
How to Set Up and Use
- Set it up. Place the turbine on a flat, clean surface away from your spray area, with the foam and HEPA filters in place.
- Connect the hose. Connect the 7073 hose to the turbine and snap the quick-connect onto your gun.
- Strain and check. Strain the coating into the cup and check it with the #4 Ford cup. Thin only as the coating maker allows.
- Pick a pressure. Choose a Smart Select setting. Start low and step up for heavier coatings.
- Test and spray. Set the fan and fluid flow on cardboard, then spray square to the surface, overlapping each pass by about half.
- Watch the light. Clean the gun right after, and replace the filters when the check filter light comes on.
Why Buy From The Paint People?
We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock D6 filters, 7073 hoses and other genuine Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.
Will it fit?
Works with your Fuji gun.
Fuji pairs the D6 with its T-Model and G-XPC guns. Connect them with the 7073 Super Duty hose.
T75G gravity gun
T-Model gun with a 600 mL gravity cup.
$519T70 bottom-feed gun
T-Model gun with a 1 L bottom-feed cup.
$519G-XPC gun, 9600-G
Side-mount 400 mL gravity cup.
$509Not included
This is the turbine only. You'll need:
- A hose: the 7073 Super Duty 30 ft hose is the D6 hose, with a brass quick-connect and air control valve.
- A Fuji turbine gun, like one of these.
- Spare D6 filters.
Compare
Which Fuji turbine?
More stages build more pressure, so thicker coatings atomize with less thinning. Here's how the turbines we sell on their own compare.
| D6This turbine | Semi-PRO 2 / Hobby-PRO 2 | Q4 Platinum | Q5 Platinum | |
|---|---|---|---|---|
| Stages | 6-stage | 2-stage | 4-stage | 5-stage |
| Pressure | Up to 11.5 psi | About 5 psi | About 9 psi | About 9.5 psi |
| Noise at 15 ft | Not listed | Not listed | 61 dBA | 63 dBA |
| Controls | Smart Select panel, 6 pre-set pressures | On/off | On/off | Variable speed dial |
| Filter | Foam + HEPA | Dual 4009-2 | Single 5029 | Single 5029 |
| Weight | 25.57 lb | 12.35 lb | 22.73 lb | 24.06 lb |
| Size | 18 × 15 × 11 in | 11 × 8.6 × 8.1 in | 14.87 × 11.5 × 9 in | 14.87 × 11.5 × 9 in |
| Guns Fuji pairs it with | T70, T75G or G-XPC | 7001, 7002G or 7003 M-Model | T70, T75G or G-XPC | T70, T75G or G-XPC |
| Price | $2,279 | $489 | $1,359 | $1,699 |
Specs as listed by Fuji Spray. Turbine only: gun and hose are sold separately.
Features
Fuji's most powerful turbine.
What's included
Turbine only.
In the box
- D6 6-stage turbine (1206C)
- Gun and hose are not included
Keep it running
Specifications
D6 turbine specs.
| Part number | 1206C |
|---|---|
| Turbine | 6-stage motor, up to 11.5 psi sealed pressure |
| Controls | Smart Select control panel with 6 pre-set pressure settings |
| Filtration | 2-stage foam and HEPA, with check filter light |
| Voltage | 110 V |
| Size | 18 × 15 × 11 in |
| Weight | 25.57 lb |
| Hose | 7073 Super Duty 30 ft hose, sold separately |
| Included | Turbine only. Gun and hose sold separately |
| Made in | Designed and assembled in Canada |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
Set-up
Hook it up and spray.
- 1Set it upPlace the turbine on a flat, clean surface away from your spray area, with the foam and HEPA filters in place.
- 2Connect the hoseConnect the 7073 hose to the turbine and snap the quick-connect onto your gun.
- 3Strain and checkStrain the coating into the cup and check it with the #4 Ford cup. Thin only as the coating maker allows.
- 4Pick a pressureChoose a Smart Select setting. Start low and step up for heavier coatings.
- 5Test and spraySet the fan and fluid flow on cardboard, then spray square to the surface, overlapping each pass by about half.
- 6Watch the lightClean the gun right after, and replace the filters when the check filter light comes on.
Goes with it
Keep your D6 spraying.
Filters, guns and air caps, all genuine Fuji.
7073 Super Duty 30 ft hose
Fits all Fuji turbines. 3 ft of heat-resistant hose.
$129.95D6 turbine filters
Foam, HEPA and motor intake filters, or the full set.
$13.95T75G gravity gun
T-Model gun with a 600 mL gravity cup.
$519T70 bottom-feed gun
T-Model gun with a 1 L bottom-feed cup.
$519G-XPC gun, 9600-G
Side-mount 400 mL gravity cup.
$5095100 air caps
0.8 to 2.5 mm caps for T70 and T75G guns.
$99.958050 air caps
Caps for the G-XPC gun.
$95.35Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Why buy from us
A spray shop, not just a website.
FAQ
D6 turbine questions, answered.
Does it come with a gun and hose?
No. This is the turbine only. Starting from scratch? The complete D6 system includes the hose, your choice of gun and Fuji's 6 for 6 accessory kit.
Which hose does it use?
The 7073 Super Duty 30 ft hose, with 3 ft of heat-resistant hose, a brass quick-connect and an air control valve.
Which guns work with it?
D6 or a Q5 turbine?
Choose the D6 if you spray heavy coatings often and want to thin less. It builds up to 11.5 psi versus about 9.5 psi on the Q5, and adds pre-set pressures and HEPA filtration. The Q5 is quieter and lighter.
Which filters does it use?
A foam pre-filter, a HEPA filter and motor intake filters. We sell them singly or as a set: D6 turbine filters.
What warranty does it have?
Fuji Spray gives the original buyer a 24-month limited warranty from the date of purchase against defects in materials and workmanship. See Fuji's warranty terms, or contact us with questions.
Fuji's most powerful turbine.
Not sure your gun and hose will fit? Tell us what you have and we'll check.