Best for most cabinet work
T75G gun
- Feed
- Gravity
- Cup
- 600 mL nylon
- Air cap
- 1.3 mm
- Model
- 2894-T75G
Paint feeds down from the top cup, so you can spray to the last drop and tilt freely on doors and face frames.
$1,829
Fuji Spray · Q Platinum series
Four-stage power.
Fuji's quietest turbine.
The Fuji Q4 Platinum is a 4-stage, 9 psi HVLP turbine system in Fuji's quiet Q case, rated 61 dBA from 15 ft. It's made for shops with neighbours or co-workers, and for spraying cabinets in homes where people are still living.
61 dBAat 15 ft, per Fuji
9 psifrom a 4-stage turbine
3 gunsT70, T75G or G-XPC
24 moFuji limited warranty
Fuji Q4 Platinum Quiet HVLP Spray System, 4-Stage Turbine
Quiet 4-stage turbine · 9 psi · 61 dBA at 15 ft
Regular price
$1,819.00 CAD
Couldn't load pickup availability
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
The Fuji Q4 Platinum is a quiet 4-stage HVLP spray system for fine finishing. Its turbine builds about 9 psi for lacquer, stain, polyurethane and most waterborne cabinet coatings, and Fuji's patented noise-reduction case keeps it at 61 dBA from 15 ft, the quietest rating in Fuji's line-up. It's made for cabinet shops, furniture makers and refinishers who work near neighbours, co-workers or homeowners. Choose the T75G gravity gun, the T70 bottom-feed gun or the G-XPC side-mount gun.
Key Features & Benefits
- Quiet Q Platinum case: 61 dBA at 15 ft and 59 dBA at 20 ft. Fuji puts a standard turbine at 79 dBA from 15 ft.
- 4-stage turbine, about 9 psi: enough pressure for most cabinet and trim coatings with little thinning.
- Heat Dissipation Chamber: moves heat out of the turbine for cooler running and longer motor life.
- Quick-change friction-fit filter in a rugged all-metal case.
- Non-bleed gun with stainless steel fluid passages and Fuji's side-mounted fan pattern control.
- 24-month Fuji limited warranty for the original buyer.
Applications & Recommended Uses
Use the Q4 Platinum on kitchen cabinets, vanities, interior doors, trim, mouldings, millwork and furniture, especially in occupied homes and small shops. It sprays waterborne and solvent-based lacquers, stains, sanding sealers, varnishes, polyurethanes and cabinet enamels. For walls, ceilings and exteriors, an airless paint sprayer is faster. Need more pressure? See the Q5 Platinum.
Product Specifications
| Model numbers | 2894-T75G, 3004-T70, GXPC-2894 |
| Turbine | 4-stage, about 9 psi |
| Noise | 61 dBA at 15 ft, 59 dBA at 20 ft |
| Power | 110–120 V, 60 Hz, 13 A |
| Turbine size and weight | 14.87 × 11.5 × 9 in, 22.73 lb |
| Filter | Single #5029 |
| Hose | 25 ft (7.6 m) Hi-Flex with quick-connect |
| Cup by gun | T75G: 600 mL nylon gravity. T70: 1 L aluminum bottom-feed. G-XPC: 400 mL aluminum side-mount gravity |
| Air cap | 1.3 mm (T75G, T70), 1.4 mm (G-XPC) |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
How to Use
- Set the turbine on a flat, clean surface away from overspray, with the filter in place.
- Connect the hose to the turbine with the quick-connect and attach the gun.
- Strain the coating, fill the cup and check viscosity with the #4 Ford cup. Thin only as the coating maker directs.
- Test on cardboard. Adjust the fan pattern and fluid flow until the spray is even.
- Spray with the gun square to the surface, overlapping each pass by about half.
- Clean the gun right away and check the filter often.
Why Buy From The Paint People?
We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock 5029 filters, 5100 air caps and other Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.
Step 1 · Pick your gun
Same turbine. Three ways to spray.
Every Q4 Platinum comes with one non-bleed Fuji gun. Pick the one that suits your work, and we'll select it in the buy box for you.
Best for bigger jobs
T70 gun
- Feed
- Bottom (siphon)
- Cup
- 1 L (1 qt) aluminum
- Air cap
- 1.3 mm
- Model
- 3004-T70
The largest cup of the three, so fewer refills on long runs like a set of cabinet boxes or a run of trim.
$1,829
Best for tight spots
G-XPC gun
- Feed
- Side-mount gravity
- Cup
- 400 mL aluminum
- Air cap
- 1.4 mm
- Model
- GXPC-2894
The cup sits on the side of the gun, so you can see past it and get into cabinet interiors, drawers and small parts.
$1,819
Noise reduction
The quietest Fuji you can buy.
A standard turbine sounds like a loud shop vac. Fuji's Q series uses an all-metal case with computer-designed air paths that cut the direct sound paths, without wrapping the motor in soundproofing that traps heat.
Standard turbineFuji's comparison figure
Fuji Q5 Platinum5-stage, 9.5 psi
Fuji Q3 Platinum3-stage, 6.5 psi
Fuji Q4 Platinum4-stage, 9 psi
Normal conversationfor reference
Sound levels measured at 15 ft, as listed by Fuji Spray. At 20 ft, Fuji lists the Q4 at 59 dBA. Bars start at 40 dBA, about the level of a quiet room. Fuji's Q series noise reduction is protected by US Patent No. 6,644,913.
Compare
Q4, Q5 or Mini-Mite 4?
The Q4 is the quietest system in Fuji's catalogue. Here's how it compares with its closest relatives.
| Model | Mini-Mite 4Portable, 4-stage | Q4 PlatinumThis system | Q5 PlatinumQuiet, 5-stage | Mini-Mite 5Portable, 5-stage |
|---|---|---|---|---|
| Turbine | 4-stage | 4-stage | 5-stage | 5-stage |
| Pressure | 9 psi | 9 psi | 9.5 psi | 9.5 psi |
| Noise at 15 ft | Not listed | 61 dBA | 63 dBA | Not listed |
| Turbine weight | 15.00 lb | 22.73 lb | 24.06 lb | 15.22 lb |
| Bonus kit | No | No | 5 for 5 | 5 for 5 |
| Best for | Carrying to job sites | Quiet shops and occupied homes | Quiet work with thicker coatings | Thicker coatings on the move |
| Price | From $1,329 | From $1,819 | From $1,989 | From $1,539 |
Specs as listed by Fuji Spray. Prices are live and include open box units where we have them.
What it's for
Made for fine finishing, quietly.
- Kitchen cabinets and vanities in occupied homes
- Small shops with neighbours or co-workers nearby
- Interior doors, trim, mouldings and millwork
- Furniture refinishing and new furniture
- Waterborne and solvent-based coatings
LacquerStainSanding sealerVarnishPolyurethaneCabinet enamelWaterborne primer & paintShellac
Painting walls or a whole house?
HVLP gives you control and little overspray, but it isn't fast on big surfaces. For walls, ceilings and exteriors, an airless paint sprayer is the better tool. For cabinets, pair your Q4 with Envirolak waterborne lacquer, which we tint and match in store.
In the box
Everything to start spraying.
Every Q4 Platinum system
- Q4 Platinum 4-stage quiet turbine (9 psi) with Heat Dissipation Chamber and quick-change friction-fit filter
- Your choice of T70, T75G or G-XPC non-bleed spray gun and cup
- 25 ft Hi-Flex hose with quick-connect coupling and air control valve
- #4 Ford viscosity cup, wrench and cleaning brush
- Detailed user manual
Worth adding
Most owners add these
Specifications
Q4 Platinum specs.
| Model numbers | 2894-T75G (T75G gun), 3004-T70 (T70 gun), GXPC-2894 (G-XPC gun) |
|---|---|
| Turbine | 4-stage Q Platinum series, about 9 psi |
| Noise | 61 dBA at 15 ft, 59 dBA at 20 ft |
| Power | 110–120 V, 60 Hz, 13 A |
| Turbine size | 14.87 × 11.5 × 9 in |
| Turbine weight | 22.73 lb |
| Filter | Single #5029, quick-change friction fit |
| Hose | 25 ft (7.6 m) Hi-Flex #7049, quick-connect |
| Cups | T75G: 600 mL nylon gravity. T70: 1 L aluminum bottom-feed. G-XPC: 400 mL aluminum side-mount gravity |
| Air cap | 1.3 mm (T75G, T70), 1.4 mm (G-XPC). Other sizes sold separately |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
Set-up & use
From box to first coat.
- 1Set up the turbineOn a flat, clean surface away from your spray area, with the filter in place.
- 2Connect the hoseSnap the quick-connect onto the turbine and attach the gun.
- 3Strain and checkStrain the coating into the cup and check it with the #4 Ford cup. Thin only as the coating maker allows.
- 4Test on cardboardSet the fan and fluid flow until the pattern is even.
- 5SprayHold the gun square to the surface and overlap each pass by about half.
- 6Clean and checkClean the gun right after with the right cleaner. Check the filter often and replace when dirty.
Keep it spraying
Parts that fit the Q4 Platinum.
Keep a spare filter and the right air caps on hand. We carry every one of these, so you're not waiting on a part to finish a job.
5029 turbine filters
Fits Q3, Q4 and Q5 Platinum turbines.
$11.755100 air caps
0.8 to 2.5 mm caps for T70 and T75G guns.
$99.958050 air caps
Caps for the G-XPC gun.
$95.356 ft whip hose
A lighter, easier-moving hose at the gun.
$59.95600 mL aluminum cup
Aluminum gravity cup upgrade.
$74.3530 ft Super Duty hose
More reach than the stock 25 ft hose.
$129.95Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.35Why buy from us
A spray shop, not just a website.
Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.
FAQ
Q4 Platinum questions, answered.
How quiet is the Q4 Platinum?
Fuji lists it at 61 dBA at 15 ft and 59 dBA at 20 ft, the lowest of any system in its catalogue. Fuji puts a standard turbine at 79 dBA from 15 ft, and normal conversation at about 60 dBA.
Q4 or Q5 Platinum: which should I buy?
The Q5 Platinum adds a fifth stage (about 9.5 psi versus 9 psi) and Fuji's 5 for 5 bonus kit. Choose the Q5 if you spray a lot of thick cabinet enamels and primers. For lacquer, stain, poly and most waterborne coatings, the Q4 has plenty of pressure and is a little quieter.
Q4 or Mini-Mite 4?
Both have a 4-stage, 9 psi turbine and the same gun choices. The Mini-Mite 4 weighs 15 lb and is built to carry. The Q4 weighs 22.73 lb and is much quieter. Choose the Q4 for a shop or occupied homes.
Which gun should I choose: T75G, T70 or G-XPC?
The T75G (600 mL gravity cup) suits most cabinet and furniture work. The T70 (1 L bottom-feed cup) means fewer refills on bigger jobs. The G-XPC (400 mL side-mount cup) gets into tight spots and small parts.
Can it spray waterborne paint and primer?
Yes. It sprays waterborne and solvent-based coatings, including lacquer, stain, polyurethane and cabinet enamel. Check viscosity with the #4 Ford cup and thin only as the coating maker allows. For waterborne paint and primer, Fuji recommends a 2.0 mm air cap, sold separately as a 5100 air cap for T-Series guns.
What filter does it use?
The Q4 uses a single #5029 filter, the same one as the Q3 and Q5. Check it often and replace it when dirty to protect the motor.
What warranty does it have?
Fuji Spray gives the original buyer a 24-month limited warranty from the date of purchase against defects in materials and workmanship. See Fuji's warranty terms. Our Rockwood Village spray centre in Mississauga also services and repairs sprayers.
Ready to spray without the roar?
Not sure about the gun or the air cap? Tell us what you're spraying. We'll help you pick, and tell you which parts to keep on hand.