Available Sheens: Semi-Gloss
Available Colours: Tintable White, Deep Base and Clear Base
Colorant Used: Industrial
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Epoxy Thinner (V704)
Resin Type: Polyamide Epoxy
Recommended Use: Interior or exterior
MPI Rating: N/A
VOC Level: 184 g/L
Products
-
Read more
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
-
Read more
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
-
Read more
Epoxy Patch Kit
V165
Show DetailsEpoxy Patch Kit is a 100% solids epoxy co-polymer matrix for repairing and patching interior concrete floors. It sets rapidly with extremely high initial strength and is ready for foot traffic in 5-8 hours. This easy-to-use 3-part system includes liquid part A, liquid catalyst and aggregate.
- 3-part system allows on-site mixing to the exact consistency needed
- High Solids with no shrinkage
- For any high-traffic floor
- Non Flammable with no odour
- Trowels easily
-
Read more
Epoxy Pool Paint
IG-40XX
Show DetailsEpoxy Pool Paint is a high solids, two-component polyamide epoxy coating that offers excellent chemical and abrasion resistance. It is extremely durable in fresh and salt water and is resistant to common pool chemicals, including chlorine. Use Epoxy Pool Paint over previous epoxy coatings, steel, fibreglass, bare concrete, marcite, gunite, or other masonry surfaces in sound condition.
- Two-component polyamide epoxy pool paint
- For use on concrete, marcite, gunite, fibreglass & steel pools
- Can also be used over existing epoxy coatings
- Extremely durable
- Resistant to common pool chemicals, including chlorine
- Two-component polyamide epoxy pool paint
-
Read more
Epoxy Thinner
V704
Show DetailsEpoxy Thinner is a carefully balanced combination of the proper solvents for reducing catalyzed epoxy primers and finish coats.
-
Read more
Fast Dry Polyamide Epoxy Coating
V410
Show DetailsFast Dry Polyamide Epoxy is a unique satin sheen epoxy that cures fully in
24 hours at 25 °C (77 °F). In addition, this product cures in temperatures as low as 0 °C (32 °F) in approximately 5 days. Fast Dry Polyamide Epoxy may be used as a high durability floor finish that can be put into service 24 hours after coating application when applied at 25 °C (77 °F).- Fast cure and low temp applications
- Excellent for all metal and masonry surfaces
- Excellent acid and chemical resistance
- Hard, scratch and impact resistant coating
- Suitable for use in USDA inspected facilities
-
Read more
Moisture Tolerant Quick Set Epoxy Sealer
V156
Show DetailsOrganic Zinc Rich Primer is a heavy-duty corrosion inhibitor for interior or exterior ferrous metal and weathered galvanized metal. It is made from an organic thermoplastic resin and leaves a finished film that is 83% zinc. Ideal for touching up existing galvanized metal with no topcoat.
- High zinc content delivers cathodic protection
- Can be top coated or left uncoated
- Thermoplastic resin requires tie coat under certain finishes; check TDS
- Cold Galvanizing Project Qualification
- Meets Composition Requirements of TT-P-1046
- Meets Performance Requirements of TT-P-641 & DOD-P-21035
- Meets Performance Requirements of Mil-P-26915 Type I, Class A
- Meets SSPC Paint #5 & SSPC Paint #20, Type II
-
Read more
Oil & Grease Emulsifier
V600
Show DetailsOil & Grease Emulsifier is designed for cleaning walls, floors and equipment. This cleaner is extremely effective in removing oil, grease, fats, blood and animal by-products. It may also be used for cleaning concrete, asphalt, vinyl, metal, plastic, fibreglass, etc.; it is also very effective for cleaning equipment, tools, brushes, rollers and spray equipment.
- Concentrated and must be mixed with water
- Biodegradable and phosphate-free
- Use on metal, fibreglass, vinyl, and masonry surfaces
- Rinses clean with no residue
-
Read more
Organic Zinc Rich Primer
Show DetailsShop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
- Economical protective coat
- Accepts a wide variety of topcoats
- Dry to the touch in 30 minutes
-
Read more
Polyamide Epoxy Coating
V400
Show DetailsPolyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.
- Highly cross-linked film for toughness and durability
- Resists many chemicals and solvents
- Medium build epoxy
- Suitable for immersion
- Suitable for use in USDA inspected facilities
-
Read more
Polyamide Epoxy Primer
V150
Show DetailsPolyamide Epoxy Primer is formulated for use on ferrous and non-ferrous metals in industrial and commercial applications. This two-component, rust-inhibitive epoxy primer is an excellent choice for use as a rust-inhibitive base coat when used as part of a high-performance coating system. With proper top coating, it demonstrates excellent resistance to moisture and chemicals, including solvents, acids, and alkalis. Polyamide Epoxy Primer is also suitable for use on concrete substrates in secondary containment and immersion service applications.
- High-solids content
- Outstanding protection against corrosion
- Engineered for use in general metal finishing and fabrication
- Also appropriate for chemical processing facilities and transportation infrastructure finishing
- Suitable as a high-performance tie coat; especially over existing epoxies
- Suitable for use in USDA-inspected facilities
-
Read more
Pre-Catalyzed Waterborne Wall Epoxy — Eggshell
V342
Show DetailsThis unique product provides epoxy toughness in a ready-to-use waterborne formula for walls, ceilings and trim (not ideal for floors). Low odour, low VOC and water cleanup make this product ideal for use in occupied areas. The cured film is scrubbable, resists water and common cleaning chemicals, and stands up to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed masonry and primed metal.
- Single pack – no catalyst
- Tints to all colours
- Qualifies for LEED
- Excellent for retail, commercial, healthcare, schools and more
- Low odour, low VOC and water cleanup
-
Read more
Pre-Catalyzed Waterborne Wall Epoxy — Semi-Gloss
V341
Show DetailsThis unique product provides epoxy toughness in a ready-to-use waterborne formula for walls, ceilings and trim (not ideal for floors). Low odour, low VOC and water cleanup make this product ideal for use in occupied areas. The cured film is scrubbable, resists water and common cleaning chemicals, and stands up to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed masonry and primed metal.
- Single pack – no catalyst
- Tints to all colours
- Qualifies for LEED
- Excellent for retail, commercial, healthcare, schools and more
- Low odour, low VOC and water cleanup
-
Read more
Prep All Universal Metal Primer
V132
Show DetailsPrep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.
- Fast 30 minute dry – recoat in 4 hours
- Tie coat over many existing coatings
- Corrosion protection on all ferrous metals
- Available in White, Red or Gray
-
Read more
Quick Dry Acrylic Spray DTM
V300
Show DetailsQuick-Dry Acrylic Spray DTM is an extremely durable, UV-resistant, modified-acrylic enamel that provides superior adhesion and maximum durability. Formulated for interior or exterior use on a variety of surfaces, including ferrous and non-ferrous metal, concrete, masonry, wood, and drywall. Quick-Dry Acrylic Spray DTM can also be used in dry-fall applications. Spray only application.
- Ideal solution for factory jobs requiring minimal “dry to handle” time
- For wood, metal and masonry surfaces
- Hard scratch- and impact-resistant coating
- Recommended for machinery, tanks, factory equipment and more
- Meets requirements for SSPC Paint Specification #24
-
Read more
Quick Dry Alkyd Enamel
V230
Show DetailsQuick Dry Alkyd Enamel is a high-performance, single-component, quick-dry, rust preventive enamel formulated for use on ferrous metal substrates. It provides corrosion resistance for both interior and exterior steel surfaces. Not recommended for non-ferrous metals such as galvanized, aluminum unless properly primed, Quick Dry Alkyd Enamel may be applied to new or properly prepared, rusted surfaces.
- Fast 15 minute dry
- No orange peel
- Airless or HVLP systems
- Hard scratch-and impact-resistant coating
- For all ferrous metal surfaces
- Compliant for field application in OTC VOC region