Available Sheens: Gloss, Semi-Gloss (Catalyst determines sheen level)
Available Colours: Clear and White; Pastel Base, Tint Base, Deep Base, and Clear Base
Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Soap and water
Resin Type: Acrylic Epoxy
Recommended Use: Interior/Exterior
MPI Rating: N/A
VOC Level: 168 g/L
Pre-Catalyzed Waterborne Wall Epoxy — Eggshell
Related products
-
Waterborne Acrylic Epoxy
V450
Show DetailsWaterborne Acrylic Epoxy is a two-component epoxy that offers unique features such as low odour and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Not recommended as a heavy-duty floor finish.
-
100% Solids Epoxy Floor Coating
V430
Show DetailsHeavy-duty protection from a 100% solids epoxy for demanding industrial/commercial environments exposed to heavy vehicular and pedestrian traffic, constant moisture, intermittent strong chemical spills, and frequent cleaning with chemicals, steam and power washers.
- Self-levelling, high-build 100% solids formula
- Very low VOC
- Tenacious adhesion to concrete
- Outstanding durability
- Smooth gloss finish
- Meets qualifications for LEED as a floor coating
- Suitable for use in USDA inspected facilities
-
Prep All Universal Metal Primer
V132
Show DetailsPrep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.
- Fast 30 minute dry – recoat in 4 hours
- Tie coat over many existing coatings
- Corrosion protection on all ferrous metals
- Available in White, Red or Gray
-
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
Reviews
There are no reviews yet.