Available Sheens: Eggshell
Available Colours: White, Pastel Base, Tint Base, Deep Base, and Clear Base
Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Soap and water
Resin Type: Waterborne Acrylic Epoxy
Recommended Use: Interior
MPI Rating: 151
VOC Level: 73 g/L
Oil & Grease Emulsifier
Related products
-
Pre-Catalyzed Waterborne Wall Epoxy — Eggshell
V342
Show DetailsThis unique product provides epoxy toughness in a ready-to-use waterborne formula for walls, ceilings and trim (not ideal for floors). Low odour, low VOC and water cleanup make this product ideal for use in occupied areas. The cured film is scrubbable, resists water and common cleaning chemicals, and stands up to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed masonry and primed metal.
- Single pack – no catalyst
- Tints to all colours
- Qualifies for LEED
- Excellent for retail, commercial, healthcare, schools and more
- Low odour, low VOC and water cleanup
-
Waterborne Bonding Primer
V175
Show DetailsWaterborne Bonding Primer is a one-component bonding primer that may also be used as a rust-inhibitive universal primer. This product bonds to various metals creating a solid foundation for finishing coats. This product may be finish coated with a wide variety of coatings including alkyds, acrylics, epoxies, urethanes and moisture cured urethanes. Because of its versatility on all metals, Waterborne Bonding Primer will replace traditional wash coat primers and offers an easier-to-use alternative for all projects.
- Replaces traditional wash coat primers with an easier-to-use coating
- Low VOC, soap and water clean-up
- Bonds to all metal substrates including tough to coat chrome, brass, stainless and aluminum
- Suitable for use in USDA inspected facilities
- Qualifies for LEEDS credits
-
Waterborne Urethane
V540
Show DetailsThis coating produces an extremely durable, chemical-resistant surface with the benefits of low odour and soap and water clean-up. Provides outstanding gloss retention and resists scratches and abrasion.
- Outstanding UV protection
- Low VOC
- Quick return to service time for minimum down time
- Excellent for floor applications
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
- Meets performance specs of MIL-C-85285
-
Fast Dry Polyamide Epoxy Coating
V410
Show DetailsFast Dry Polyamide Epoxy is a unique satin sheen epoxy that cures fully in
24 hours at 25 °C (77 °F). In addition, this product cures in temperatures as low as 0 °C (32 °F) in approximately 5 days. Fast Dry Polyamide Epoxy may be used as a high durability floor finish that can be put into service 24 hours after coating application when applied at 25 °C (77 °F).- Fast cure and low temp applications
- Excellent for all metal and masonry surfaces
- Excellent acid and chemical resistance
- Hard, scratch and impact resistant coating
- Suitable for use in USDA inspected facilities
Reviews
There are no reviews yet.