Available Sheens: Gloss, Semi-Gloss (Catalyst determines sheen level)
Available Colours: Clear and White; Pastel Base, Tint Base, Deep Base, and Clear Base
Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Soap and water
Resin Type: Acrylic Epoxy
Recommended Use: Interior/Exterior
MPI Rating: N/A
VOC Level: 168 g/L
Epoxy Patch Kit
Related products
-
Waterborne Acrylic Epoxy
V450
Show DetailsWaterborne Acrylic Epoxy is a two-component epoxy that offers unique features such as low odour and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Not recommended as a heavy-duty floor finish.
-
Prep All Universal Metal Primer
V132
Show DetailsPrep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.
- Fast 30 minute dry – recoat in 4 hours
- Tie coat over many existing coatings
- Corrosion protection on all ferrous metals
- Available in White, Red or Gray
-
Coal Tar Epoxy
V157
Show DetailsCoal Tar Epoxy is a high-solids, two-component tar filled coating formulated to provide excellent film build in one or two coats. The high level of cross-linking provides an excellent barrier coat for immersion service in fresh water, salt water or waste water. Additionally, this product is resistant to many acids, alkalis and mild solvents in splash and spill exposures.
- Formulated for use over properly prepared/primed steel, iron, concrete, and non-ferrous metal
- Provides excellent protection from water, acids, alkalis, and mild solvents
- Can be applied directly to the substrate; use with a primer for extra longevity
- Suitable for use in USDA inspected facilities
- Meets Performance Requirements for Army Corps of Engineers C-200
- Meets Performance Requirements for SSPC Paint 16
- Meets Performance Requirements for DOD-P-23236
-
Aliphatic Acrylic Urethane — Semi-Gloss
V510
Show DetailsAliphatic Acrylic Urethane is a multi-use, two-component urethane appropriate for use on both metal and masonry. This product provides excellent gloss and colour retention when used on exterior surfaces exposed to sunlight and rain, and the highly cross-linked formula provides superior abrasion, chemical, and solvent resistance. Due to these outstanding features, urethanes are often used as the final layer in a multi-layer system on steel or masonry.
- Resistant to hydraulic fluid
- Outstanding UV protection
- High chemical and abrasion resistance
- Suitable for use in USDA inspected facilities
- Meets performance specs of MIL-C-85285
- Excellent anti-graffiti coating
Reviews
There are no reviews yet.