Available Sheens: Gloss
Available Colours: Clear
Colorant Used: N/A
Colour System Supported: N/A
Cleanup: Xylene
Resin Type: Aromatic Moisture-Cured Urethane
Recommended Use: Interior
MPI Rating: 31
VOC Level: 335 g/L
Moisture Tolerant Quick Set Epoxy Sealer
Related products
-
Aromatic Moisture-Cured Urethane
V580
Show DetailsThis coating is a one-component, high-solids, moisture-cured urethane intended for use on floors exposed to moderate to extreme conditions. It provides excellent abrasion, impact resistance and chemical resistance. Exposure to sunlight will cause yellowing.
- 2 hours dry to touch
- Uses moisture in the air to produce a hard cross-linked film
- Quick return to light traffic (8 to 12 hours depending on humidity)
- Suitable for use in USDA inspected facilities
-
Waterborne Acrylic Epoxy
V450
Show DetailsWaterborne Acrylic Epoxy is a two-component epoxy that offers unique features such as low odour and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Not recommended as a heavy-duty floor finish.
-
Waterborne Amine Epoxy
V440
Show DetailsWaterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This waterborne product has lower odour than solvent based epoxies, is easy to apply, and thus can be applied in occupied areas. Additionally, this product can be applied to many existing generic coating types with less risk of lifting or wrinkling.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
- Water cleanup, low odour, fast dry
- Easy application with excellent adhesion
- Very good resistance to water and chemicals
- Excellent for use on basement floors
- Meets qualifications for LEED when used over metal substrates
- Suitable for use in USDA inspected facilities
-
Aliphatic Acrylic Urethane – Gloss
V500
Show DetailsAliphatic Acrylic Urethane – Gloss is a multi-use, two-component urethane appropriate for use on both metal and masonry. This product provides excellent gloss and colour retention when used on exterior surfaces exposed to sunlight and rain, and the highly cross-linked formula provides superior abrasion, chemical, and solvent resistance. Due to these outstanding features, urethanes are often used as the final layer in a multi-layer system on steel or masonry.
- Resistant to hydraulic fluid
- Outstanding UV protection
- High chemical and abrasion resistance
- Suitable for use in USDA inspected facilities
- Meets performance specs of MIL-C-85285
- Excellent anti-graffiti coating
Reviews
There are no reviews yet.