Available Sheens: Semi-Gloss
Available Colours: White; Pastel Base, Tint Base, Deep Base, and Clear Base
Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Soap and water
Resin Type: Waterborne Acrylic
Recommended Use: Interior
MPI Rating: 153
VOC Level: 204 g/L
Epoxy Mastic Coating
Related products
-
Acrylic DTM Enamel — Semi-Gloss
V331
Show DetailsAcrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates. A special inhibitor in the formula prevents flash rust when applied to ferrous metal, and the smooth dry film is UV and moisture resistant.
- For light-to-moderate industrial, commercial and select residential use
- Excellent for metal, as well as wood, masonry, drywall and other surfaces
- Resists flash rust on metal
- Excellent for all corrugated metal sheeting
- Can be used on galvanized and aluminum metal
-
Aliphatic Acrylic Urethane – Gloss
V500
Show DetailsAliphatic Acrylic Urethane – Gloss is a multi-use, two-component urethane appropriate for use on both metal and masonry. This product provides excellent gloss and colour retention when used on exterior surfaces exposed to sunlight and rain, and the highly cross-linked formula provides superior abrasion, chemical, and solvent resistance. Due to these outstanding features, urethanes are often used as the final layer in a multi-layer system on steel or masonry.
- Resistant to hydraulic fluid
- Outstanding UV protection
- High chemical and abrasion resistance
- Suitable for use in USDA inspected facilities
- Meets performance specs of MIL-C-85285
- Excellent anti-graffiti coating
-
Acrylic Metal Primer
V110
Show DetailsAcrylic Metal Primer is a water-reducible, rust-inhibitive primer for steel, iron, and non-ferrous metal. It provides excellent adhesion to a range of hard-to-coat surfaces and can even be applied over tightly adhering rust. Designed for light-to-moderate industrial exposures, this product can be top coated with a wide variety of coatings.
- High solids content
- Low odour; suitable for occupied areas
- Can be recoated in just 4 hours
- Suitable for use in USDA-inspected facilities
- Qualifies for LEED certification
-
Polyamide Epoxy Coating
V400
Show DetailsPolyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.
- Highly cross-linked film for toughness and durability
- Resists many chemicals and solvents
- Medium build epoxy
- Suitable for immersion
- Suitable for use in USDA inspected facilities
Reviews
There are no reviews yet.