Available Sheens: Primer
Available Colours: Red and Gray
Colorant Used: N/A
Colour System Supported: N/A
Cleanup: Mineral Spirits or High Flash Naphtha
Resin Type: Alkyd
Recommended Use: Interior or exterior
MPI Rating: N/A
VOC Level: 337 g/L
Epoxy Mastic Coating
Related products
-
Organic Zinc Rich Primer
Show DetailsShop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
- Economical protective coat
- Accepts a wide variety of topcoats
- Dry to the touch in 30 minutes
-
Polyamide Epoxy Coating
V400
Show DetailsPolyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.
- Highly cross-linked film for toughness and durability
- Resists many chemicals and solvents
- Medium build epoxy
- Suitable for immersion
- Suitable for use in USDA inspected facilities
-
Aromatic Moisture-Cured Urethane
V580
Show DetailsThis coating is a one-component, high-solids, moisture-cured urethane intended for use on floors exposed to moderate to extreme conditions. It provides excellent abrasion, impact resistance and chemical resistance. Exposure to sunlight will cause yellowing.
- 2 hours dry to touch
- Uses moisture in the air to produce a hard cross-linked film
- Quick return to light traffic (8 to 12 hours depending on humidity)
- Suitable for use in USDA inspected facilities
-
Acrylic DTM Enamel – Gloss
V330
Show DetailsAcrylic DTM Enamel delivers superior resistance to moisture. This waterborne, all-acrylic finish can be applied direct-to-metal or over primer. The glossy surface is UV resistant, and special inhibitors in the formula prevent flash rusting when the finish is applied to ferrous metal.
- For light-to-moderate industrial exposures
- For metal, wood and masonry substrates
- Flash rust resistant and corrosion protection on ferrous metals
- Excellent for all corrugated metal sheeting
- Meets Performance Requirements of TT-P-1511
Reviews
There are no reviews yet.