Best for most cabinet work
T75G gun
- Feed
- Gravity
- Cup
- 600 mL nylon
- Air cap
- 1.3 mm
- Model
- 4106-T75G-OB
Paint feeds down from the top cup, so you can spray to the last drop and tilt freely on doors and face frames.
$2,861.10
Fuji Spray · D6 · Open box (A+)
Like new.
For less.
An open-box Fuji D6: opened but never used, inspected to A+ condition and complete, with the full Fuji warranty and the 6 for 6 accessory kit. It's the same system as a new D6, for less.
A+inspected, never used
FullFuji warranty
35 daysto return
11.5 psimax sealed pressure
Fuji D6 HVLP Spray System, Open Box (A+)
Open box (A+) · never used · full Fuji warranty · 6 for 6 kit
Regular price
$2,861.10 CAD
Couldn't load pickup availability
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
This is an open-box (A+) Fuji D6. The box has been opened, and it may be a customer return, but the system has never been used. It's inspected to A+ condition, complete with every part a new D6 comes with, and carries the full Fuji manufacturer's warranty. The 6 for 6 accessory kit is included, and it has the same 35-day returns as a new system. Stock is limited. A new D6 is also available.
What Open Box (A+) Means
- Opened, never used: The box has been opened, and it may be a customer return, but the system has never been sprayed.
- Inspected A+: Each unit is inspected to A+ condition and is complete, with every part a new system comes with.
- Full Fuji warranty: 2 + 1 years from Fuji Spray, the same as a new D6.
- 6 for 6 accessory kit included: Fuji's bonus accessories come with it, just like a new D6.
- 35-day returns: The same 35-day returns as a new system.
Key Features & Benefits
- 6-stage motor, up to 11.5 psi: the most pressure in the Fuji range, for heavier coatings with less thinning.
- Smart Select control panel with 6 pre-set pressure settings, so you can repeat the same setting job after job.
- 2-stage foam and HEPA filtration with a check filter light, for cleaner, warmer, drier air.
- Easy Pause remote to pause the turbine without walking back to it.
- Cool operation design to extend motor life, plus a fold-away gun holder.
- 6 for 6 accessory kit included, and a 2 + 1 year warranty from Fuji.
Applications & Recommended Uses
Use the D6 on kitchen cabinets, built-ins, doors, millwork and furniture, especially with heavy waterborne or solvent-based enamels, primers, lacquers and polyurethanes. For walls, ceilings and exteriors, an airless paint sprayer is faster. Mostly spraying lacquer and stain? The Q5 Platinum or Mini-Mite 5 may be all you need.
Product Specifications
| Model numbers | 4106-T75G, 4006-T70, GXPC-4106 |
| Turbine | 6-stage, up to 11.5 psi sealed pressure |
| Controls | Smart Select panel, 6 pre-set pressures, Easy Pause remote |
| Filtration | 2-stage foam and HEPA |
| Size and weight | 18 × 15 × 11 in, 25.57 lb |
| Hose | 30 ft, ¾ in inside diameter |
| Cup by gun | T75G: 600 mL nylon gravity. T70: 1 L aluminum bottom-feed. G-XPC: 400 mL aluminum side-mount gravity |
| Air cap | 1.3 mm (T75G, T70), 1.4 mm (G-XPC), plus a 1.8 mm set |
| Warranty | 2 + 1 years (Fuji Spray) |
How to Use
- Set the turbine on a flat, clean surface away from overspray, with the filters in place.
- Connect the hose to the turbine with the quick-connect and attach the gun.
- Strain the coating, fill the cup and check viscosity with the #4 Ford cup. Thin only as the coating maker directs.
- Test on cardboard, starting with the speed control low. Adjust the fan pattern and fluid flow until the spray is even.
- Spray with the gun square to the surface, overlapping each pass by about half.
- Clean the gun right away and check the filters often.
Why Buy From The Paint People?
We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock 5100 air caps, 8050 air caps and other Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.
Step 1 · Pick your gun
Same turbine. Three ways to spray.
Every open-box D6 comes with one non-bleed Fuji gun. Stock is limited, so each option shows what's available. Want one sealed in the box? See the new D6.
Best for bigger jobs
T70 gun
- Feed
- Bottom (siphon)
- Cup
- 1 L (1 qt) aluminum
- Air cap
- 1.3 mm
- Model
- 4006-T70-OB
The largest cup of the three, so fewer refills on long runs like a set of cabinet boxes or a run of trim.
$2,861.10
Best for tight spots
G-XPC gun
- Feed
- Side-mount gravity
- Cup
- 400 mL aluminum
- Air cap
- 1.4 mm
- Model
- GXPC-4106-OB
The cup sits on the side of the gun, so you can see past it and get into cabinet interiors, drawers and small parts.
$2,851.10
Open box (A+)
What open box means here.
Every open-box unit is checked before it's listed, and it's sold on the same terms as a new one.
Opened, never usedThe box has been opened, and it may be a customer return, but the system has never been sprayed.
Inspected A+Each unit is inspected to A+ condition and is complete, with every part a new system comes with.
Full Fuji warranty2 + 1 years from Fuji Spray, the same as a new D6.
6 for 6 accessory kit includedFuji's bonus accessories come with it, just like a new D6.
35-day returnsThe same 35-day returns as a new system.
What it's for
Made for heavy coatings and long days.
- Production cabinet and millwork shops
- Heavy cabinet enamels, primers and high-solids coatings
- Contractors spraying cabinets and doors on site
- Furniture makers and refinishers
- Waterborne and solvent-based coatings
LacquerStainSanding sealerVarnishPolyurethaneCabinet enamelWaterborne primer & paintShellacHigh-build primer
Painting walls or a whole house?
HVLP gives you control and little overspray, but it isn't fast on big surfaces. For walls, ceilings and exteriors, an airless paint sprayer is the better tool. For cabinets, pair your D6 with Envirolak waterborne lacquer, which we tint and match in store.
In the box
Everything to start spraying.
Every D6 system
- D6 6-stage turbine (up to 11.5 psi) with Smart Select control panel and fold-away gun holder
- Easy Pause remote control
- Your choice of T70, T75G or G-XPC non-bleed spray gun and cup
- 30 ft hose with quick-connect and air control valve
- #4 Ford viscosity cup, wrench, cleaning brush and user manual
Included with open box
Fuji 6 for 6 accessory kit
- 6 ft flexible whip hose
- D6 filter pack
- 1.8 mm air cap set
- 19-piece spray gun cleaning kit
- "Always Measure" booklet
- Wet film gauge
Specifications
D6 specs.
| Model numbers | 4106-T75G (T75G gun), 4006-T70 (T70 gun), GXPC-4106 (G-XPC gun) |
|---|---|
| Turbine | 6-stage motor, up to 11.5 psi sealed pressure |
| Controls | Smart Select control panel with 6 pre-set pressure settings, Easy Pause remote |
| Filtration | 2-stage foam and HEPA, with check filter light |
| Voltage | 110 V |
| Size | 18 × 15 × 11 in |
| Weight | 25.57 lb |
| Hose | 30 ft, ¾ in inside diameter. Threaded at the turbine, quick-connect at the gun |
| Cups | T75G: 600 mL nylon gravity. T70: 1 L aluminum bottom-feed. G-XPC: 400 mL aluminum side-mount gravity |
| Air cap | 1.3 mm (T75G, T70), 1.4 mm (G-XPC), plus a 1.8 mm set in the 6 for 6 kit |
| Made in | Designed and assembled in Canada |
| Warranty | 2 + 1 years, per Fuji Spray |
Set-up & use
From box to first coat.
- 1Set up the turbineOn a flat, clean surface away from your spray area, with the foam and HEPA filters in place.
- 2Connect the hoseThread the hose onto the turbine and snap the quick-connect onto the gun.
- 3Strain and checkStrain the coating into the cup and check it with the #4 Ford cup. Thin only as the coating maker allows.
- 4Pick a pressureChoose a Smart Select setting. Start low and step up for heavier coatings.
- 5Test and spraySet the fan and fluid flow on cardboard, then spray square to the surface, overlapping each pass by about half.
- 6Pause, clean, checkUse the Easy Pause remote between parts. Clean the gun right after, and replace the filters when the check filter light comes on.
Keep it spraying
Parts that fit the D6.
Keep the right air caps and a clean gun on hand. We carry every one of these, so you're not waiting on a part to finish a job.
5100 air caps
0.8 to 2.5 mm caps for T70 and T75G guns.
$99.958050 air caps
Caps for the G-XPC gun.
$95.35600 mL aluminum cup
Aluminum gravity cup upgrade.
$74.355262 rebuild kit
Seals and parts for T70 and T75 guns.
$58.259610 rebuild kit
Rebuild kit for G-XPC and XPC guns.
$47.65Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.35Wet film gauge
Check wet film thickness as you spray.
$12.05Why buy from us
A spray shop, not just a website.
Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.
FAQ
D6 questions, answered.
What does open box (A+) mean?
The box has been opened, and the unit may be a customer return, but it has never been used. It's inspected to A+ condition and complete, with every part a new D6 comes with.
Does an open-box unit have the full warranty?
Yes. It carries the full Fuji manufacturer's warranty: 2 + 1 years from Fuji Spray, the same as a new D6.
Is the bonus kit included?
Yes. The 6 for 6 accessory kit comes with every open-box D6, the same as a new system.
Can I return an open-box unit?
Yes. Open-box units have the same 35-day returns as new. See our refund policy for details.
Is the D6 worth it over the Q5 or Mini-Mite 5?
Choose the D6 if you spray heavy coatings often and want to thin less. It builds up to 11.5 psi versus 9.5 psi on the 5-stage Q5 and Mini-Mite 5, and adds pre-set pressure settings, HEPA filtration and a remote. For lacquer, stain and most cabinet work, a 5-stage system is plenty.
Can the D6 spray without thinning?
More pressure means heavier coatings atomize with less thinning, and many coatings may spray as they come. It depends on the coating, so check viscosity with the #4 Ford cup and follow the coating maker's directions. Test on scrap first.
Which gun should I choose: T75G, T70 or G-XPC?
The T75G (600 mL gravity cup) suits most cabinet and furniture work. The T70 (1 L bottom-feed cup) means fewer refills on bigger jobs. The G-XPC (400 mL side-mount cup) gets into tight spots and small parts.
What does the HEPA filtration do?
The D6 draws air through a foam pre-filter and a HEPA filter, so the air reaching your finish is cleaner, warmer and drier. A check filter light tells you when it's time to change them.
Save on a D6 that's never been used.
Open-box stock is limited. If the gun you want is sold out, the new D6 comes with the same 6 for 6 accessory kit.