Fuji Spray · DIY-PRO series
Built for paint.
Weekend-friendly price.
The Fuji Hobby-PRO 2 pairs a 2-stage, 5 psi DIY-PRO turbine in a black metal case with Fuji's non-bleed black M-Model 7003 bottom-feed gun and a 1 qt aluminum pressurized cup. It comes with a 1.8 mm air cap installed, so pigmented and waterborne paints are ready to go, for furniture, doors, trim and cabinets.
5 psifrom a 2-stage turbine
25 ftHi-Flex hose
1.8 mmair cap installed
24 moFuji limited warranty
Fuji Hobby-PRO 2 HVLP Spray System, 2250
2-stage DIY-PRO turbine · M-Model bottom-feed gun · 1.8 mm cap
Regular price
$679.00 CAD
Couldn't load pickup availability
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
The Fuji Hobby-PRO 2 (2250) is an easy-to-use HVLP spray system for furniture, doors, trim and cabinets. It pairs Fuji's 2-stage, 5 psi DIY-PRO turbine in a black metal case with a non-bleed black M-Model 7003 bottom-feed gun and a 1 qt aluminum pressurized cup. A 1.8 mm air cap comes installed, so it's set up for pigmented and waterborne paints, with a soft, even spray and very little overspray.
Key Features & Benefits
- 2-stage DIY-PRO turbine, about 5 psi in a metal case with a handy gun holder.
- Non-bleed M-Model 7003 gun: air flows only when you pull the trigger, with stainless steel needle and nozzle.
- 1.8 mm air cap installed for paints, with 0.8 to 2.0 mm 7020 caps available for stains and clears.
- 1 qt aluminum pressurized cup for fewer refills on doors and bigger pieces.
- Rear fan pattern control and air control valve to set the pattern and cut overspray and bounce-back.
- Bonus spare filters and cup parts kit in the box.
What's Included
- 2-stage DIY-PRO series turbine (5 psi) in a black metal case with gun holder
- Non-bleed black M-Model 7003 bottom-feed gun with 1 qt aluminum pressurized cup
- 1.8 mm air cap set installed, rear fan pattern control
- 25 ft Hi-Flex hose with quick-connect coupling and air control valve
- #4 Ford viscosity cup, wrench, cleaning brush and user manual
- Bonus set of turbine filters and bottom-feed cup parts kit
Applications & Recommended Uses
Use the Hobby-PRO 2 for furniture makeovers, interior doors, trim, mouldings, cabinets and craft projects. It sprays waterborne and solvent-based paints, primers, stains, lacquers and polyurethanes, thinned as needed. For walls, ceilings and exteriors, an airless paint sprayer is faster. Spraying often or using thicker coatings? Step up to the Mini-Mite 3 Platinum.
Product Specifications
| Model number | 2250 |
| Turbine | 2-stage, about 5 psi |
| Power | 110–120 V, 11.5 A |
| Turbine size | 11 × 8.6 × 8.1 in |
| Turbine weight | 12.35 lb |
| Gun | M-Model 7003, bottom feed, black |
| Cup | 1 qt aluminum pressurized cup |
| Air cap | 1.8 mm installed |
| Filter | Dual #4009-2 |
| Hose | 25 ft Hi-Flex with quick-connect |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
How to Use
- Set the turbine on a flat, clean surface away from overspray, with the filters in place.
- Connect the hose to the turbine with the quick-connect and attach the gun.
- Strain the coating, fill the cup and check viscosity with the #4 Ford cup. Thin only as the coating maker directs.
- Test on cardboard. Adjust the fan pattern and fluid flow until the spray is even.
- Spray with the gun square to the surface, overlapping each pass by about half.
- Clean the gun right away and check the filters often.
Why Buy From The Paint People?
We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock 7020 air caps, 4009-2 filters and other Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.
Why the Hobby-PRO 2
Pro-style spraying, simplified.
Non-bleed M-Model gunAir flows only when you pull the trigger, with stainless steel needle and nozzle and a rear fan pattern control.
1.8 mm air cap installedSet up for pigmented and waterborne paints. Swap in 7020 air caps from 0.8 to 2.0 mm for stains and clears.
1 qt bottom-feed cupA big aluminum pressurized cup means fewer refills on doors, trim and furniture.
2-stage metal turbineA rugged metal case with a handy gun holder and dual filters.
Air control valveTurn the air down at the gun to cut overspray and bounce-back.
Bonus filters and cup kitA spare set of turbine filters and a bottom-feed cup parts kit come in the box.
Turbine power
Where the Hobby-PRO 2 fits.
Two stages are plenty for stains, lacquers, polyurethanes and thinned paints. Thicker coatings atomize more easily with more stages.
Hobby-PRO 2 / Semi-PRO 22-stage DIY-PRO
Mini-Mite 3 / Q33-stage Platinum
Mini-Mite 4 / Q44-stage Platinum
Mini-Mite 5 / Q55-stage Platinum
D66-stage
Pressure as listed by Fuji Spray. More stages build more pressure, so thicker coatings atomize with less thinning.
Compare
Which entry-level Fuji?
Fuji's DIY-PRO systems share the same 2-stage turbine. The difference is the gun, cup and installed air cap, and the Mini-Mite 3 is the first step up.
| Model | Hobby-PRO 2This system | Semi-PRO 2Bottom feed | Semi-PRO 2 GravityGravity feed | Mini-Mite 3Platinum, 3-stage |
|---|---|---|---|---|
| Turbine | 2-stage, 5 psi | 2-stage, 5 psi | 2-stage, 5 psi | 3-stage, 6.5 psi |
| Gun | M-Model 7003, bottom feed (black) | M-Model 7001, bottom feed | M-Model 7002G, gravity | T75G, T70 or G-XPC |
| Cup | 1 qt aluminum | 1 qt aluminum | 400 mL aluminum | 600 mL, 1 L or 400 mL |
| Air cap installed | 1.8 mm | 1.3 mm | 1.3 mm | 1.3 or 1.4 mm |
| Filter | Dual #4009-2 | Dual #4009-2 | Dual #4009-2 | Dual #7224-2 |
| Best for | Paints out of the box | Doors, trim, furniture | Detail work, smaller parts | Frequent use, Platinum build |
| Price | From $679 | From $679 | From $679 | From $1,049 |
Specs as listed in Fuji Spray's catalogue. Prices are live.
What it's for
Made for weekend projects and small shops.
- Furniture makeovers and refinishing
- Interior doors, trim and mouldings
- Kitchen and bathroom cabinets
- Crafts, cabinets and small workshop projects
- Waterborne and solvent-based coatings
StainLacquerPolyurethaneVarnishSanding sealerThinned latex paintShellac
Painting walls or a whole house?
HVLP gives you control and little overspray, but it isn't fast on big surfaces. For walls, ceilings and exteriors, an airless paint sprayer is the better tool. For cabinets, pair your Hobby-PRO 2 with Envirolak waterborne lacquer, which we tint and match in store.
In the box
Everything to start spraying.
In the Hobby-PRO 2 box
- 2-stage DIY-PRO series turbine (5 psi) in a black metal case with gun holder
- Non-bleed black M-Model 7003 bottom-feed gun with 1 qt aluminum pressurized cup
- 1.8 mm air cap set installed, rear fan pattern control
- 25 ft Hi-Flex hose with quick-connect coupling and air control valve
- #4 Ford viscosity cup, wrench, cleaning brush and user manual
- Bonus set of turbine filters and bottom-feed cup parts kit
Worth adding
Most owners add these
Specifications
Hobby-PRO 2 specs.
| Model number | 2250 |
|---|---|
| Turbine | 2-stage DIY-PRO series, about 5 psi (1103C, black) |
| Power | 110–120 V, 11.5 A |
| Turbine size | 11 × 8.6 × 8.1 in |
| Turbine weight | 12.35 lb |
| Spray gun | Non-bleed black M-Model 7003 bottom-feed gun, stainless steel needle and nozzle, rear fan pattern control |
| Cup | 1 qt aluminum pressurized, bottom feed |
| Air cap | 1.8 mm installed. 0.8 to 2.0 mm 7020 caps sold separately |
| Filter | Dual #4009-2 |
| Hose | 25 ft Hi-Flex, quick-connect, air control valve |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
Set-up & use
From box to first coat.
- 1Set up the turbineOn a flat, clean surface away from your spray area, with the filters in place.
- 2Connect the hoseSnap the quick-connect onto the turbine and attach the gun.
- 3Strain and checkStrain the coating into the cup and check it with the #4 Ford cup. Thin only as the coating maker allows.
- 4Test on cardboardSet the fan and fluid flow until the pattern is even.
- 5SprayHold the gun square to the surface and overlap each pass by about half.
- 6Clean and checkClean the gun right after with the right cleaner. Check the filters often and replace when dirty.
Keep it spraying
Parts that fit the Hobby-PRO 2.
Match the air cap to your coating and keep spare filters on hand. We carry every one of these.
7020 air caps
Caps for M-Model guns.
$79.454009-2 turbine filters
Fits Semi-PRO and other DIY-PRO turbines. 2-pack.
$11.457003 M-Model gun, black
Spare or replacement gun, 1.8 mm cap.
$319Replacement turbine
Hobby-PRO 2 turbine only, 1103C.
$4896 ft whip hose
A lighter, easier-moving hose at the gun.
$59.95Hi-Flex 25 ft hose
Replacement 25 ft turbine hose.
$99.95Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.35Why buy from us
A spray shop, not just a website.
Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.
FAQ
Hobby-PRO 2 questions, answered.
Hobby-PRO 2 or Semi-PRO 2: what's the difference?
They share the same 2-stage turbine and specs. The Hobby-PRO 2 has a black turbine and the black 7003 M-Model gun with a 1.8 mm air cap installed, set up for paints. The Semi-PRO 2 is blue with a 1.3 mm cap for clears and stains. Either takes any 7020 cap.
Hobby-PRO 2 or Mini-Mite 3?
The Mini-Mite 3 Platinum steps up to 3 stages and 6.5 psi, Fuji's Platinum build and T-Series guns. Choose it if you spray often or use thicker coatings. For weekend projects, the Hobby-PRO 2 does the job.
Can it spray latex paint?
Yes, usually thinned. The 1.8 mm cap that comes installed suits pigmented and waterborne paints, but a 2-stage turbine still works best with thinner coatings. Check viscosity with the #4 Ford cup, thin only as the paint maker allows, and test on cardboard first.
Which air cap should I use?
The 1.8 mm cap installed suits pigmented and waterborne paints. Use 1.3 mm for clear lacquer, varnish and polyurethane, and a smaller cap for dyes and stains. M-Model guns take 7020 caps.
What filter does it use?
Dual #4009-2 filters. A spare set comes in the box. Check them often and replace them when dirty to protect the motor.
Can I buy just the turbine?
Yes. The Hobby-PRO 2 turbine (1103C) is sold on its own, and so is the 7003 gun.
What warranty does it have?
Fuji Spray gives the original buyer a 24-month limited warranty from the date of purchase against defects in materials and workmanship. See Fuji's warranty terms. Our Rockwood Village spray centre in Mississauga also services and repairs sprayers.
Ready to spray paint, not just clears?
Not sure which cap or coating to start with? Tell us what you're spraying. We'll help you set up, and tell you which parts to keep on hand.