Fuji Spray · Mini cups
Small batches.
Less waste.
The genuine Fuji 9080 set gives you three 8 oz pressurized mini cups for touch-ups, samples and small jobs on Fuji bottom-feed guns. The small cup also gets the gun into tighter spots, and the spare lids turn the other cups into storage.
3mini cups in the set
8 ozper cup
Pressurizedfor an even pattern
Lidswith gaskets for storage
Ensemble de mini-tasses Fuji Spray 9080, 3 pièces
Three 8 oz cups · Pressurized · Touch-ups and samples
Prix habituel
$75.55 CAD
Impossible de charger la disponibilité du service de retrait
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
- Ensemble de mini-gobelets de pulvérisation industrielle pour utilisation avec un pistolet de pulvérisation ou pour le stockage de peinture
- Taille parfaite pour les retouches et les petits projets ; accès plus facile du pistolet de pulvérisation aux zones confinées
- Conception sous pression pour un motif de pulvérisation uniforme
- Chaque gobelet est livré avec un couvercle et un joint robustes
- Ensemble de 3 gobelets de 8 onces ; les gobelets s'adaptent à n'importe quel pistolet de pulvérisation Fuji
Will it fit?
Made for Fuji bottom-feed guns.
The 9080 cups fit Fuji bottom-feed (suction) turbine guns, past and present, including the T70 and M-Model guns.
T70 bottom-feed gun
T-Model gun with a 1 L bottom-feed cup.
$5197001 M-Model gun
Bottom feed. The gun on the Semi-PRO 2.
$319Spraying a gravity gun?
The mini cups don't fit the G-XPC or gravity guns.
- For a smaller gravity cup on the T75G, try the 9740 400 mL cup.
- Not sure? Send us a photo of your gun and we'll check.
Why mini cups
Right-sized for small jobs.
Touch-ups and samplesMix just what you need instead of filling a quart cup.
Tighter spotsA small cup under the gun is easier to get into cabinets and corners.
Colours ready to goCap the spare cups with storage lids to keep colours on hand.
What's included
Three cups, ready to use.
In the 9080 set
- 3 mini cups, 8 oz each
- Lid with gasket that connects the cup to the gun
- 2 storage lids with gaskets
Specifications
9080 mini-cup set specs.
| Part number | 9080 |
|---|---|
| Capacity | 8 oz per cup |
| Set | 3 cups, 3 lids with gaskets |
| Type | Pressurized bottom-feed mini cup |
| Fits | Fuji bottom-feed (suction) turbine guns. Not for the G-XPC or gravity guns |
| Uses | Touch-ups, samples, small jobs and paint storage |
| Brand | Fuji Spray, Toronto, Canada |
How to
Spray small batches.
- 1Fill a cupStrain a small batch of coating into one of the mini cups.
- 2Fit the gun lidScrew on the lid that connects to the gun, with its gasket in place.
- 3Attach to the gunFit the cup to the gun in place of the quart cup.
- 4SprayThe cup is pressurized, so the pattern stays even as it empties.
- 5Store the restCap the other cups with the storage lids to keep colours ready for touch-ups.
- 6Clean upEmpty, wipe and flush the cup and lid with the right cleaner.
Goes with it
More for your bottom-feed gun.
Cups, spares and caps, all genuine Fuji.
9811-6 250cc mini cups
Six spare mini cups with lids.
$87.952095 1 qt cup assembly
The current Fuji bottom-feed cup, with tube, gasket and diaphragm.
$79.952098 cup parts kit
Wear parts for the 2095 quart cup.
$45.759960 gravity conversion kit
Turns a Fuji bottom-feed gun into a gravity gun.
$78.357020 air caps
Caps for M-Model guns.
$79.455100 air caps
0.8 to 2.5 mm caps for T70 and T75G guns.
$99.95Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.35Why buy from us
A spray shop, not just a website.
Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.
FAQ
9080 mini-cup set questions, answered.
Which guns do the 9080 cups fit?
Fuji bottom-feed (suction) turbine guns, past and present, including the T70 and M-Model guns. They don't fit the G-XPC or gravity guns.
What's included?
Three 8 oz cups, a lid with gasket that connects the cup to the gun, and two storage lids with gaskets.
Are the cups pressurized?
Yes. The cup is pressurized, so the spray pattern stays even.
What are they best for?
Touch-ups, colour samples and small jobs, plus storing leftover coating for later touch-ups.
Do you sell more mini cups?
Yes. The 9811-6 is a 6-pack of 250cc mini cups with lids.
Mix less. Waste less.
Not sure they fit your gun? Send us a photo and we'll check.