Fuji Spray · MPX-30 air cap sets

Tune your MPX-30
to the coating.

Genuine Fuji 6300MPX air cap sets for the MPX-30 compressor spray gun, in 5 sizes from 1.0 to 2.0 mm. Each set is a matched air cap, needle and nozzle.

5sizes, 1.0 to 2.0 mm
1.4 mmgravity standard size
3matched parts per set
MPX-30gun only
Fuji MPX-30 1.0 mm air cap set with needle and nozzle
Air cap set shown

Ensemble de buse à air Fuji Spray MPX-30 1.0mm (6300MPX-1.0)

En stock - 10 articles disponibles
SKU: 6300MPX-1.0 UPC: 612850630100
5 sizes · 1.0 to 2.0 mm · MPX-30 only
Prix habituel $90.65 CAD
Size
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
Sortie fine à moyenne - Idéal pour la plupart des finitions fines, y compris de nombreux revêtements à base d'eau. Permet l'application d'une couche mince et humide. Émail pour automobile, finitions pour avions et marins. Laques à la nitrocellulose, scellant, cellulose, acryliques, synthétiques, polyuréthane, teintures, vernis et apprêts

Will it fit?

Made for the Fuji MPX-30.

6300MPX sets fit only the Fuji MPX-30 compressor spray gun, gravity or siphon.

Use the right set

Fuji makes separate air cap sets for each compressor gun. Order a different set for:

  • The LX-20: use LX-20 sets (6200LX).
  • Fuji HVLP turbine guns, which take their own sets.
  • Other brands' guns. Not sure what you have? Send us a photo.

Size guide

Match the cap to the coating.

Smaller sets suit thinner coatings and a finer pattern. Larger sets move heavier coatings. Start with the standard size and go from there.

Finest

1.0mm

Fine finishing with thinner coatings.

$90.65#6300MPX-1.0
Clear coat

1.3mm

Fuji's pick for clear coat. Comes with the gravity version.

$90.65#6300MPX-1.3
Standard set

1.4mm

Installed on the gravity version. Fuji's pick for base coat.

$90.65#6300MPX-1.4
Siphon standard

1.7mm

Installed on the siphon version, for heavier coatings.

$90.65#6300MPX-1.7
Heaviest

2.0mm

The largest set, for the thickest coatings.

$90.65#6300MPX-2.0

Always follow your coating maker's recommended set-up and test on a panel first.

Not sure? Start with 1.4 mm.

The gravity version comes with 1.4 mm installed plus a 1.3 mm set. The siphon version comes with 1.7 mm installed plus a 1.4 mm set.

What's included

A complete, matched set.

Every 6300MPX set

  • Air cap
  • Fluid needle
  • Fluid nozzle
  • Genuine Fuji Spray part, sized as marked

Specifications

MPX-30 air cap specs.

Part numbers6300MPX-1.0 (1.0 mm), 6300MPX-1.3 (1.3 mm), 6300MPX-1.4 (1.4 mm), 6300MPX-1.7 (1.7 mm), 6300MPX-2.0 (2.0 mm)
IncludesAir cap, needle and nozzle
FitsFuji MPX-30 compressor spray gun only, gravity or siphon
Standard size1.4 mm (gravity), 1.7 mm (siphon)
CoatingsWaterborne and solvent-borne, including high-solid clear coat
BrandFuji Spray, Toronto, Canada

Changing sizes

Swap sizes in six steps.

  1. 1Clean and disconnectFlush the gun with the right cleaner, then disconnect it from the air supply.
  2. 2Remove the air capUnscrew the retaining ring at the front of the gun and lift off the air cap.
  3. 3Pull the needleBack out the fluid control knob, remove the spring, then squeeze the trigger and slide the needle out.
  4. 4Remove the nozzleUnscrew the fluid nozzle with a spray gun wrench.
  5. 5Fit the new sizeInstall the nozzle snugly, then the needle, spring, knob, air cap and retaining ring on the MPX-30. Always fit the cap, needle and nozzle from the same set.
  6. 6Test on a panelSet the pressure at the gun inlet, then adjust the fan and fluid flow until the pattern is even.

Why buy from us

A spray shop, not just a website.

Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.

FAQ

MPX-30 air cap questions, answered.

Which gun do 6300MPX air cap sets fit?

Only the Fuji MPX-30 compressor spray gun, gravity or siphon. Fuji makes separate 6200LX sets for the LX-20.

Which size comes on the MPX-30?

The gravity version comes with 1.4 mm installed plus a 1.3 mm set. The siphon version comes with 1.7 mm installed plus a 1.4 mm set.

What's included in a set?

A matched air cap, fluid needle and fluid nozzle. Always change all three together.

Which size should I choose?

Fuji recommends 1.3 mm for clear coat and 1.4 mm for base coat. Use 1.0 mm for fine finishing, and 1.7 or 2.0 mm for heavier coatings.

Do I need to thin my coating?

Follow your coating maker's thinning and spray gun set-up. Bigger sets suit heavier coatings, but always test on a panel before you spray the job.

Can you service my gun?

Yes, once it's out of warranty. Our Rockwood Village spray centre in Mississauga repairs spray guns. Contact us to book it in. Still under Fuji's 24-month warranty? Contact Fuji Spray first.

Get the most from your MPX-30.

Tell us what you're spraying. We'll help you pick the size.