Fuji Spray · Primis P30 primer gun
Made for
primer.
The Fuji Primis P30 is an HVLP gravity spray gun for your compressor, made for primers, sealers and fillers. It comes with a 1.8 mm air cap and a 600cc nylon cup.

Fuji Primis P30 HVLP Primer Spray Gun, 1.8 mm, 600cc Cup
Couldn't load pickup availability
The Fuji Primis P30 HVLP primer spray gun is Fuji Spray's dedicated gun for primers, sealers and fillers in automotive refinishing. It uses 10.9 cfm of compressed air at 9 to 28 psi, comes with a 1.8 mm air cap installed and a 600cc nylon gravity cup, and weighs 448 g without the cup. Rear-mounted fan and fluid controls, copper fluid passages and few internal parts make it simple to set up and clean, with waterborne or solvent-based primers. It's available online only.
Key Features & Benefits
- Built for primer: Primers, sealers and fillers, waterborne or solvent-based.
- Primer air caps: 1.8 mm installed, with 1.6, 2.0 and 2.2 mm sets sold separately.
- Rear-mounted controls: Fan and fluid adjustment at the back of the gun.
- 600cc nylon cup included: Ready to spray out of the box.
- Aluminum body: 448 g without a cup, with copper fluid passages.
- Few internal parts: Quicker to strip, clean and maintain.
- 310 mm max fan: For full panels of primer.
- 24-month Fuji limited warranty: For the original buyer, from the date of purchase.
Applications & Recommended Uses
Fuji built the Primis P30 for the primer stage of a refinish: primers, sealers and fillers, waterborne or solvent-based. Fuji says air caps from 1.8 to 2.2 mm suit most primers, with the 1.6 mm cap for thinner sealers. Keeping a dedicated primer gun means your base and clear guns stay clean. For base coat, use the Valor H100, and for clear, the Valor M100. Not sure which cap to use? Ask our spray team.
What's in the Box
- Primis P30 gun with 1.8 mm air cap (7425)
- 600cc nylon gravity cup
Compatibility
Takes Primis P30 air cap sets in 1.6, 1.8, 2.0 and 2.2 mm. Runs on compressed air, not a Fuji turbine. See all compressor spray guns.
Product Specifications
| Model | Fuji Primis P30 HVLP primer spray gun, gravity feed |
| Part number | 7425 |
| Included | Gun with 1.8 mm air cap, 600cc nylon gravity cup |
| Air cap sets available | 1.6, 1.8, 2.0 and 2.2 mm, sold separately |
| Air consumption | 10.9 cfm |
| Operating pressure | 9 to 28 psi |
| Air inlet | 1/4" PF |
| Air hose | 5/16" ID |
| Fluid inlet | 3/8" PF (gravity) |
| Max fan width | 310 mm |
| Weight | 448 g, without cup |
| Body | Aluminum, copper fluid passages |
| Coatings | Primers, sealers and fillers, waterborne or solvent-based |
| Controls | Rear-mounted fan and fluid controls |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
| Brand | Fuji Spray, Toronto, Canada |
How to Use
- Check your air. Your compressor and lines need to deliver 10.9 cfm at the gun. Use clean, dry air.
- Connect the air. Fit your air fitting to the 1/4" inlet and run a 5/16" ID air hose.
- Pick your cap. Start with the 1.8 mm cap. Fuji says 1.8 to 2.2 mm suits most primers, so go bigger for thicker high-build.
- Fill the cup. Strain the primer or sealer into the 600cc nylon cup.
- Set the pressure. Set the pressure between 9 and 28 psi, then adjust the rear-mounted fan and fluid controls on a test panel.
- Clean right away. Flush the gun with the right cleaner for your waterborne or solvent-based primer.
Why Buy From The Paint People?
We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers. The Primis P30 is available online only. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.
Will it fit?
Set it up for your primer.
Swap air caps from 1.6 to 2.2 mm to match the primer you're spraying.
Primis P30 air cap sets
1.6, 1.8, 2.0 and 2.2 mm, sold separately.
$89.903100 gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.35Before you buy
The Primis P30 runs on compressed air, not a turbine.
- Your compressor needs to deliver 10.9 cfm at the gun.
- Spraying base or clear? Look at the Valor H100 or Valor M100.
- Not sure? Tell us your compressor and we'll check.
Features
Built for the primer booth.
What's included
What's in the box.
Included
- Primis P30 gun with 1.8 mm air cap (7425)
- 600cc nylon gravity cup
Pairs well
Specifications
Primis P30 specs.
| Model | Fuji Primis P30 HVLP primer spray gun, gravity feed |
|---|---|
| Part number | 7425 |
| Included | Gun with 1.8 mm air cap, 600cc nylon gravity cup |
| Air cap sets available | 1.6, 1.8, 2.0 and 2.2 mm, sold separately |
| Air consumption | 10.9 cfm |
| Operating pressure | 9 to 28 psi |
| Air inlet | 1/4" PF |
| Air hose | 5/16" ID |
| Fluid inlet | 3/8" PF (gravity) |
| Max fan width | 310 mm |
| Weight | 448 g, without cup |
| Body | Aluminum, copper fluid passages |
| Coatings | Primers, sealers and fillers, waterborne or solvent-based |
| Controls | Rear-mounted fan and fluid controls |
| Warranty | 24 months limited (Fuji Spray), original purchaser, from the date of purchase |
| Brand | Fuji Spray, Toronto, Canada |
Set-up
Set up the Primis P30.
- 1Check your airYour compressor and lines need to deliver 10.9 cfm at the gun. Use clean, dry air.
- 2Connect the airFit your air fitting to the 1/4" inlet and run a 5/16" ID air hose.
- 3Pick your capStart with the 1.8 mm cap. Fuji says 1.8 to 2.2 mm suits most primers, so go bigger for thicker high-build.
- 4Fill the cupStrain the primer or sealer into the 600cc nylon cup.
- 5Set the pressureSet the pressure between 9 and 28 psi, then adjust the rear-mounted fan and fluid controls on a test panel.
- 6Clean right awayFlush the gun with the right cleaner for your waterborne or solvent-based primer.
Goes with it
Goes with the Primis P30.
Air caps, cleaning supplies and Fuji's base and clear guns.
Why buy from us
A spray shop, not just a website.
FAQ
Primis P30 questions, answered.
What size compressor do I need?
Fuji lists the Primis P30 at 10.9 cfm, with an operating range of 9 to 28 psi. Check your compressor's rated cfm, not just its tank size. Not sure? Tell us your compressor and we'll check.
What is the Primis P30 made for?
Primer. Fuji built it for primers, sealers and fillers, waterborne or solvent-based. It's a dedicated primer gun, so your base and clear guns stay clean.
Which air cap size does it come with?
It comes with a 1.8 mm air cap installed. Primis P30 air cap sets in 1.6, 1.8, 2.0 and 2.2 mm are sold separately. Fuji says 1.8 to 2.2 mm suits most primers.
Does it come with a cup?
Yes. The Primis P30 comes with a 600cc nylon gravity cup.
Is it in stock at your stores?
No. The Primis P30 is available online only, not in our stores.
Can I use it for base coat or clear?
Fuji lists it for primer, sealer and general purpose work. For base coat, look at the Valor H100, and for clear, the Valor M100.
What warranty does it have?
Fuji Spray gives the original buyer a 24-month limited warranty from the date of purchase against defects in materials and workmanship. See Fuji's warranty terms, or contact us with questions.
Can you service it for me?
Yes, once it's out of warranty. Our Rockwood Village spray centre in Mississauga repairs spray guns. Contact us to book it in. Still under Fuji's 24-month warranty? Contact Fuji Spray first, because repairs by anyone other than Fuji or its authorized agent void the warranty.
Lay down an even primer coat.
Not sure the Primis P30 suits your compressor or primer? Tell us what you have and we'll help.