Fuji Spray · Primis P30 air cap sets

Tune your Primis P30
to the coating.

Genuine Fuji 7420 air cap sets for the Primis P30 compressor spray gun, in 4 sizes from 1.6 to 2.2 mm. Change sizes to suit the coating you're spraying.

4sizes, 1.6 to 2.2 mm
1.8 mmthe standard size
GenuineFuji Spray part
Primis P30gun only

Fuji 7420 Air Cap Sets for the Primis P30 Spray Gun, 1.6 to 2.2 mm

In stock
SKU: 7420-1.6 UPC: 612850742063
4 sizes · 1.6 to 2.2 mm · Primis P30 only
Regular price $89.90 CAD
Size
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!

Genuine Fuji 7420 air cap sets for the Fuji Primis P30 compressor spray gun. Choose from 4 sizes from 1.6 to 2.2 mm, so one Primis P30 can handle more than one coating. The Primis P30 comes with the 1.8 mm size installed.

Key Features & Benefits

  • 4 sizes, 1.6 to 2.2 mm: match the cap to your coating.
  • Made for the Primis P30: a correct fit on your gun.
  • Standard size 1.8 mm: the size installed on the Primis P30.
  • Genuine Fuji Spray parts from Toronto, Canada.

Compatibility

7420 sets fit only the Fuji Primis P30 compressor spray gun. They don't fit Fuji HVLP turbine guns. See all compressor spray guns.

Which Size Do I Need?

Size Part Use it for
1.6 mm 7420-1.6 Fuji's pick for thinner sealers.
1.8 mm 7420-1.8 The set that comes on the Primis P30, for most primers.
2.0 mm 7420-2.0 More output for most primers.
2.2 mm 7420-2.2 The largest set, for heavier primers.

Product Specifications

Part numbers 7420-1.6 (1.6 mm), 7420-1.8 (1.8 mm), 7420-2.0 (2.0 mm), 7420-2.2 (2.2 mm)
Includes One air cap set in the size you choose
Fits Fuji Primis P30 compressor spray gun only
Standard size 1.8 mm
Coatings Primers, sealers and fillers, waterborne or solvent-based
Brand Fuji Spray, Toronto, Canada

How to Change an Air Cap Set

  1. Clean and disconnect. Flush the gun with the right cleaner, then disconnect it from the air supply.
  2. Remove the air cap. Unscrew the retaining ring at the front of the gun and lift off the air cap.
  3. Pull the needle. Back out the fluid control knob, remove the spring, then squeeze the trigger and slide the needle out.
  4. Remove the nozzle. Unscrew the fluid nozzle with a spray gun wrench.
  5. Fit the new size. Install the nozzle snugly, then the needle, spring, knob, air cap and retaining ring on the Primis P30. Keep the air cap, needle and nozzle matched in size.
  6. Test on a panel. Set the pressure at the gun inlet, then adjust the fan and fluid flow until the pattern is even.

Why Buy From The Paint People?

We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock gun cleaning kits, strainers and other genuine Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.

Will it fit?

Made for the Fuji Primis P30.

7420 sets fit only the Fuji Primis P30 compressor spray gun.

Use the right set

Fuji makes separate air cap sets for each compressor gun. Order a different set for:

  • Fuji HVLP turbine guns, which take their own sets.
  • Other brands' guns. Not sure what you have? Send us a photo.

Size guide

Match the cap to the coating.

Smaller sets suit thinner coatings and a finer pattern. Larger sets move heavier coatings. Start with the standard size and go from there.

Sealers

1.6mm

Fuji's pick for thinner sealers.

$89.90#7420-1.6
Standard set

1.8mm

The set that comes on the Primis P30, for most primers.

$89.90#7420-1.8
Primers

2.0mm

More output for most primers.

$89.90#7420-2.0
Heaviest

2.2mm

The largest set, for heavier primers.

$89.90#7420-2.2

Always follow your coating maker's recommended set-up and test on a panel first.

Not sure? Start with 1.8 mm.

It's the size that comes on the Primis P30. Add a second size when you switch to a thinner or heavier coating.

Specifications

Primis P30 air cap specs.

Part numbers7420-1.6 (1.6 mm), 7420-1.8 (1.8 mm), 7420-2.0 (2.0 mm), 7420-2.2 (2.2 mm)
IncludesOne air cap set in the size you choose
FitsFuji Primis P30 compressor spray gun only
Standard size1.8 mm
CoatingsPrimers, sealers and fillers, waterborne or solvent-based
BrandFuji Spray, Toronto, Canada

Changing sizes

Swap sizes in six steps.

  1. 1Clean and disconnectFlush the gun with the right cleaner, then disconnect it from the air supply.
  2. 2Remove the air capUnscrew the retaining ring at the front of the gun and lift off the air cap.
  3. 3Pull the needleBack out the fluid control knob, remove the spring, then squeeze the trigger and slide the needle out.
  4. 4Remove the nozzleUnscrew the fluid nozzle with a spray gun wrench.
  5. 5Fit the new sizeInstall the nozzle snugly, then the needle, spring, knob, air cap and retaining ring on the Primis P30. Keep the air cap, needle and nozzle matched in size.
  6. 6Test on a panelSet the pressure at the gun inlet, then adjust the fan and fluid flow until the pattern is even.

Why buy from us

A spray shop, not just a website.

Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.

FAQ

Primis P30 air cap questions, answered.

Which gun do 7420 air cap sets fit?

Only the Fuji Primis P30 compressor spray gun. Other Fuji guns take their own sets.

Which size comes on the Primis P30?

The Primis P30 comes with the 1.8 mm air cap installed.

What's included in a set?

One genuine Fuji Primis P30 air cap set in the size you choose. Not sure what you need for your gun? Ask us before you order.

Which size should I choose?

Fuji says sets from 1.8 to 2.2 mm suit most primers, with the 1.6 mm set for thinner sealers. The 1.8 mm set comes on the Primis P30.

Do I need to thin my coating?

Follow your coating maker's thinning and spray gun set-up. Bigger sets suit heavier coatings, but always test on a panel before you spray the job.

Can you service my gun?

Yes, once it's out of warranty. Our Rockwood Village spray centre in Mississauga repairs spray guns. Contact us to book it in. Still under Fuji's 24-month warranty? Contact Fuji Spray first.

Get the most from your Primis P30.

Tell us what you're spraying. We'll help you pick the size.