Fuji Spray · H-V8 air cap sets

Tune your H-V8
to the coating.

Genuine Fuji 6890H air cap sets for the H-V8 compressor spray gun, in 6 sizes from 1.2 to 2.2 mm. Each set is a matched air cap, needle and nozzle.

6sizes, 1.2 to 2.2 mm
1.4 mmthe standard size
3matched parts per set
H-V8gun only

Fuji 6890H Air Cap Sets for the H-V8 Spray Gun, 1.2 to 2.2 mm

In stock
SKU: 6890H-V8-1.2 UPC: 612850689122
6 sizes · 1.2 to 2.2 mm · H-V8 only
Regular price $89.90 CAD
Size
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!

Genuine Fuji 6890H air cap sets for the Fuji H-V8 compressor spray gun. Each set is a matched air cap, fluid needle and fluid nozzle, in 6 sizes from 1.2 to 2.2 mm, so one H-V8 can handle more than one coating. The H-V8 comes with the 1.4 mm size installed.

Key Features & Benefits

  • 6 sizes, 1.2 to 2.2 mm: match the cap to your coating.
  • Complete matched set: air cap, needle and nozzle.
  • Standard size 1.4 mm: the size installed on the H-V8.
  • Genuine Fuji Spray parts from Toronto, Canada.

Compatibility

6890H sets fit only the Fuji H-V8 compressor spray gun. Fuji makes separate 6800MP sets for the MP-V8. They don't fit Fuji HVLP turbine guns. See all compressor spray guns.

Which Size Do I Need?

Size Part Use it for
1.2 mm 6890H-V8-1.2 The smallest set, for thin coatings and a fine pattern.
1.3 mm 6890H-V8-1.3 A step finer than the standard set.
1.4 mm 6890H-V8-1.4 The set that comes on the H-V8, for base coat.
1.7 mm 6890H-V8-1.7 Heavier coatings and more output.
2.0 mm 6890H-V8-2.0 Thicker coatings.
2.2 mm 6890H-V8-2.2 The largest set, for the thickest coatings.

Product Specifications

Part numbers 6890H-V8-1.2 (1.2 mm), 6890H-V8-1.3 (1.3 mm), 6890H-V8-1.4 (1.4 mm), 6890H-V8-1.7 (1.7 mm), 6890H-V8-2.0 (2.0 mm), 6890H-V8-2.2 (2.2 mm)
Includes Air cap, stainless steel needle and stainless steel nozzle
Fits Fuji H-V8 compressor spray gun only
Standard size 1.4 mm
Coatings Waterborne and solvent-borne base coat. Fuji says the H-V8 is best suited to base and clear coat
Brand Fuji Spray, Toronto, Canada

How to Change an Air Cap Set

  1. Clean and disconnect. Flush the gun with the right cleaner, then disconnect it from the air supply.
  2. Remove the air cap. Unscrew the retaining ring at the front of the gun and lift off the air cap.
  3. Pull the needle. Back out the fluid control knob, remove the spring, then squeeze the trigger and slide the needle out.
  4. Remove the nozzle. Unscrew the fluid nozzle with a spray gun wrench.
  5. Fit the new size. Install the nozzle snugly, then the needle, spring, knob, air cap and retaining ring on the H-V8. Always fit the cap, needle and nozzle from the same set.
  6. Test on a panel. Set the pressure at the gun inlet, then adjust the fan and fluid flow until the pattern is even.

Why Buy From The Paint People?

We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock gun cleaning kits, strainers and other genuine Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.

Will it fit?

Made for the Fuji H-V8.

6890H sets fit only the Fuji H-V8 compressor spray gun.

Use the right set

Fuji makes separate air cap sets for each compressor gun. Order a different set for:

  • The MP-V8: use MP-V8 sets (6800MP).
  • Fuji HVLP turbine guns, which take their own sets.
  • Other brands' guns. Not sure what you have? Send us a photo.

Size guide

Match the cap to the coating.

Smaller sets suit thinner coatings and a finer pattern. Larger sets move heavier coatings. Start with the standard size and go from there.

Finest

1.2mm

The smallest set, for thin coatings and a fine pattern.

$89.90#6890H-V8-1.2
Fine

1.3mm

A step finer than the standard set.

$89.90#6890H-V8-1.3
Standard set

1.4mm

The set that comes on the H-V8, for base coat.

$89.90#6890H-V8-1.4
Medium-heavy

1.7mm

Heavier coatings and more output.

$89.90#6890H-V8-1.7
Heavy

2.0mm

Thicker coatings.

$89.90#6890H-V8-2.0
Heaviest

2.2mm

The largest set, for the thickest coatings.

$89.90#6890H-V8-2.2

Always follow your coating maker's recommended set-up and test on a panel first.

Not sure? Start with 1.4 mm.

It's the size that comes on the H-V8. Add a second size when you switch to a thinner or heavier coating.

What's included

A complete, matched set.

Every 6890H set

  • Air cap
  • Fluid needle
  • Fluid nozzle
  • Genuine Fuji Spray part, sized as marked

Specifications

H-V8 air cap specs.

Part numbers6890H-V8-1.2 (1.2 mm), 6890H-V8-1.3 (1.3 mm), 6890H-V8-1.4 (1.4 mm), 6890H-V8-1.7 (1.7 mm), 6890H-V8-2.0 (2.0 mm), 6890H-V8-2.2 (2.2 mm)
IncludesAir cap, stainless steel needle and stainless steel nozzle
FitsFuji H-V8 compressor spray gun only
Standard size1.4 mm
CoatingsWaterborne and solvent-borne base coat. Fuji says the H-V8 is best suited to base and clear coat
BrandFuji Spray, Toronto, Canada

Changing sizes

Swap sizes in six steps.

  1. 1Clean and disconnectFlush the gun with the right cleaner, then disconnect it from the air supply.
  2. 2Remove the air capUnscrew the retaining ring at the front of the gun and lift off the air cap.
  3. 3Pull the needleBack out the fluid control knob, remove the spring, then squeeze the trigger and slide the needle out.
  4. 4Remove the nozzleUnscrew the fluid nozzle with a spray gun wrench.
  5. 5Fit the new sizeInstall the nozzle snugly, then the needle, spring, knob, air cap and retaining ring on the H-V8. Always fit the cap, needle and nozzle from the same set.
  6. 6Test on a panelSet the pressure at the gun inlet, then adjust the fan and fluid flow until the pattern is even.

Why buy from us

A spray shop, not just a website.

Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.

FAQ

H-V8 air cap questions, answered.

Which gun do 6890H air cap sets fit?

Only the Fuji H-V8 compressor spray gun. Fuji makes separate 6800MP sets for the MP-V8.

Which size comes on the H-V8?

The H-V8 comes with the 1.4 mm air cap installed.

What's included in a set?

A matched air cap, fluid needle and fluid nozzle, with a stainless steel needle and nozzle. Always change all three together.

Which size should I choose?

Start with the 1.4 mm set that comes on the H-V8 for base coat. Go smaller for thinner coatings and a finer pattern, or larger for heavier coatings. Your coating maker's set-up sheet is the best guide.

Can I use MP-V8 sets on the H-V8?

Fuji makes a separate set for each gun: 6890H for the H-V8 and 6800MP for the MP-V8. Order the set made for your gun.

Do I need to thin my coating?

Follow your coating maker's thinning and spray gun set-up. Bigger sets suit heavier coatings, but always test on a panel before you spray the job.

Can you service my gun?

Yes, once it's out of warranty. Our Rockwood Village spray centre in Mississauga repairs spray guns. Contact us to book it in. Still under Fuji's 24-month warranty? Contact Fuji Spray first.

Get the most from your H-V8.

Tell us what you're spraying. We'll help you pick the size.