3M

3M PPS 2.0 Adapter Type S15 26046, 3/8"-19 BSP Male

In stock - 4 items available
SKU: MMM26046 UPC: 051131260467
Regular price $52.90 CAD
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!

The 3M PPS 2.0 Adapter, Type S15 (26046) converts DeVilbiss, Binks and other gravity spray guns with a 3/8"-19 BSP cup thread to the 3M PPS Series 2.0 disposable cup system. It's the adapter 3M lists for the DeVilbiss GTi Pro, Tekna, FinishLine FLG and CVi gravity guns, the Binks M1-G and the Earlex Sprayport Pro-8 Gravity, among many others. With the S15 on your gun, you mix, filter and spray from a disposable lid and liner, then toss them. That means faster colour changes, less solvent and no cup to scrub. It suits refinish shops, cabinet and furniture finishers, and contractors who spray every day.

Key Features & Benefits

  • Keep your gun. Take off the existing cup and thread the S15 in. No new spray gun needed.
  • Four-point connection on a wide 360° platform. The PPS 2.0 lid connects at four points, so a full cup stays steady through long passes.
  • Stainless steel. Resists solvents and holds up to daily cleaning.
  • Wide bowl design. Wipes clean fast between jobs.
  • Fits every PPS 2.0 cup size. Works with all PPS 2.0 cups and lids, from the 90 mL Micro to the 850 mL Large.
  • Less solvent, faster clean-up. 3M reports up to 70% less cleaning solvent and up to 50% less prep and clean-up time than conventional cups.

Applications & Recommended Uses

Use the S15 on gravity-feed guns with a 3/8"-19 BSP cup inlet, most often DeVilbiss and Binks. It's a good fit for:

  • Automotive basecoat, clearcoat and primer work
  • Cabinet, furniture and millwork finishing with lacquers and waterborne coatings
  • Industrial, equipment and marine coatings
  • Jobs with frequent colour changes, where a fresh liner means no cup to wash
  • Small batches you want to mix in the cup, spray, then seal and save

PPS 2.0 is a closed system, so you can spray at any angle, even upside down.

How to Install and Use

  1. Remove the existing cup from your spray gun.
  2. Thread the S15 adapter into the gun's cup inlet until snug.
  3. Mix your coating in a PPS 2.0 liner inside the hard cup, using the mix ratios printed on the cup.
  4. Lock the lid onto the cup with a quarter turn, then attach the cup to the adapter.
  5. Spray. When you're done, cap the lid with a sealing plug to save leftover material, or throw away the lid and liner.
  6. Clean the gun and adapter with a small amount of the right solvent or water for your coating.

PPS 2.0 lids have a built-in 125 or 200 micron filter. Follow your coating maker's filter recommendation.

Why Buy From The Paint People?

We're a family-run Mississauga paint business that has served painters since 1997. We stock 3M PPS 2.0 cups and liners alongside the adapters, so you can set up your gun in one order. Not sure which adapter fits? Email info@thepaintpeople.com with your gun's make and model and we'll point you to the right one.

Specifications
Brand 3M
Product 3M PPS Series 2.0 Adapter
Adapter type S15
3M part number 26046
3M ID 7100135334
UPC 00051131260467
Thread 3/8"-19 BSP
Thread type Male
Material Stainless steel
Works with All PPS 2.0 cup and lid sizes (90 to 850 mL)
Not for Original (legacy) PPS lids and cups
Sold as 1 adapter
Compatible Spray Guns

3M lists the S15 (26046) for these gravity guns. This is a partial list; check your gun's cup thread if your model isn't here.

  • DeVilbiss GTi: GTi Pro (Base, Clear, Digital), GTi 600G, GTi 625G Waterborne, GTi Millennium 620G and 2000, GTiW
  • DeVilbiss Tekna: Tekna, ProLite, Clearcoat, Copper, QuickClean
  • DeVilbiss FinishLine: FLG4 gravity models, FLG-615, FLG-635, FLG-643, FLG-645, FLG-648, FLG-654, FLG-691, FLG-695
  • DeVilbiss other: CVi 522G / 620G / 620GW, DV1, dRd, EXL 620G, GFG-670 Plus, GFHV-510, JGA-535G, JGA-635G, PRi 601G Primer, Compact 506 gravity
  • Binks: M1-G, 95G, 630, BBR, MGI 1.8 Primer
  • Others: Earlex Sprayport Pro-8 Gravity, Graco Delta GF, Sharpe Cobalt HVLP (Euro), Mac SG610K, Meiji F410, ANI F1-s HPS

Siphon or pressure-feed versions of these guns (for example the DeVilbiss FinishLine FLG4 siphon models or Compact 506 siphon) take the S18 adapter instead.

FAQs

Which DeVilbiss guns use the S15 adapter?

Most DeVilbiss gravity guns, including the GTi Pro, Tekna, FinishLine FLG and CVi lines. Check the compatible list above for your exact model.

My DeVilbiss is a siphon or pressure-feed gun. Is the S15 right?

No. 3M lists the S18 adapter for most DeVilbiss siphon and pressure-feed guns. The S15 is for gravity-feed models.

Does it work with original PPS cups and lids?

No. 3M designs Series 2.0 adapters for PPS Series 2.0 lids, liners and cups only.

Does it come with cups, lids or liners?

No, this is the adapter only. Pair it with a PPS 2.0 lid and liner kit, such as the Midi 400 mL kit (26112).

What thread does the S15 have?

A 3/8"-19 BSP male thread, in stainless steel.

How do I clean the adapter?

The lid and liner are disposable, so only the gun and adapter need cleaning. Flush or wipe the adapter with a small amount of the right solvent or water.

  • Found a lower price elsewhere? We'll match it plus give you an extra 5% off the difference. Get the best deal guaranteed*

Canada Shipping

  • Enjoy free shipping to Ontario and Quebec on orders over $249.
  • Orders over $249 qualify for free shipping to all other provinces.
  • Returns accepted within 35 days from the date of delivery.
  • Custom tinted paints are classified as Final Sale items and are not eligible for return or store credit.