Fuji Spray · G-XPC touch-up cup
Small batches
on the G-XPC.
The genuine Fuji 8080 is a small 3 oz gravity cup for the Fuji G-XPC spray gun. It's handy for touch-ups, colour samples and small parts, when the standard 400cc cup holds far more than the job needs.
Fuji 8080 3 oz Gravity Cup for G-XPC Spray Guns
Couldn't load pickup availability
The genuine Fuji 8080 3 oz gravity cup is a small cup assembly for the Fuji G-XPC spray gun, handy for touch-ups, colour samples and small parts.
Key Features & Benefits
- Small 3 oz cup: For touch-ups and samples.
- Fits the G-XPC: Fuji's side-mount gravity gun.
- Less waste: Mix only what the job needs.
- Genuine Fuji Spray part: For a correct fit and seal.
What's Included
- 3 oz gravity cup assembly
Compatibility
Fits the Fuji G-XPC spray gun. For the T75G, use the 9730 3 oz cup. Other G-XPC cups: the 9850 400cc and 9870 600 mL.
Product Specifications
| Part number | 8080 |
| Capacity | 3 oz |
| Type | Gravity cup assembly |
| Uses | Touch-ups, colour samples and small parts |
| Fits | Fuji G-XPC spray gun |
| Brand | Fuji Spray, Toronto, Canada |
Keep the cup clean
- Strain every fill. Strain the coating into the cup so debris doesn't reach the nozzle.
- Empty and wipe. After spraying, pour out what's left and wipe the cup with a cleaner-soaked rag.
- Flush the gun. Add a little cleaner to the cup and spray it through until it runs clear.
- Clean the lid. Clean the inside and outside of the cup and lid, and any vent or tube.
- Check the seal. Look over the lid and seal, and replace worn parts so the cup seals properly.
- Store it dry. Let the cup and lid dry before you put them away.
Why Buy From The Paint People?
We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock 9850 and 9870 G-XPC cups and other genuine Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.
Will it fit?
Made for the Fuji G-XPC.
The 8080 fits the Fuji G-XPC gravity spray gun.
Need a different cup?
It's for the G-XPC only.
- T75G gun: the 9730 3 oz cup.
- Bottom-feed T70 or M-Model: the 9080 mini-cup set.
Compare
Which G-XPC cup?
All three fit the G-XPC. Pick by how much you spray at a time.
| 8080 3 ozThis cup | 9850 400cc | 9870 600 mL | |
|---|---|---|---|
| Capacity | 3 oz | 400 mL | 600 mL |
| Best for | Touch-ups, samples and small parts | The standard G-XPC cup | Bigger jobs, fewer refills |
| Price | $68.65 | $68.65 | $101.85 |
Capacities as listed by Fuji Spray. Prices update from the store.
Why a 3 oz cup
Right-sized for small jobs.
What's included
Ready for the G-XPC.
In the box
- 3 oz gravity cup assembly
Specifications
8080 cup specs.
| Part number | 8080 |
|---|---|
| Capacity | 3 oz |
| Type | Gravity cup assembly |
| Uses | Touch-ups, colour samples and small parts |
| Fits | Fuji G-XPC spray gun |
| Brand | Fuji Spray, Toronto, Canada |
Care
Keep the cup clean.
- 1Strain every fillStrain the coating into the cup so debris doesn't reach the nozzle.
- 2Empty and wipeAfter spraying, pour out what's left and wipe the cup with a cleaner-soaked rag.
- 3Flush the gunAdd a little cleaner to the cup and spray it through until it runs clear.
- 4Clean the lidClean the inside and outside of the cup and lid, and any vent or tube.
- 5Check the sealLook over the lid and seal, and replace worn parts so the cup seals properly.
- 6Store it dryLet the cup and lid dry before you put them away.
Goes with it
More cups and spares.
Cups, seals and spares, all genuine Fuji.
9850 400cc G-XPC cup
Replacement side-mount cup assembly.
$68.659870 600 mL G-XPC cup
Bigger nylon side-mount cup.
$101.858050 air caps
Caps for the G-XPC gun.
$95.359610 G-XPC rebuild kit
Rebuild kit for G-XPC and XPC guns.
$47.65Gravity cup lids and gaskets
Lids, 600 mL and 1000 mL gaskets and fittings.
$6.65Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.359730 3 oz cup
Small touch-up gravity cup for the T75G.
$77.50Why buy from us
A spray shop, not just a website.
FAQ
8080 cup questions, answered.
Which gun does the 8080 fit?
The Fuji G-XPC gravity spray gun.
What's it for?
Touch-ups, colour samples and small parts, when the standard 400cc cup holds more than you need.
Does it fit the T75G?
No. The T75G takes the 9730 3 oz cup.
Is there a bigger G-XPC cup?
How do I clean it?
Empty it, wipe it with a cleaner-soaked rag, and spray a little cleaner through the gun until it runs clear. Never soak the whole gun in solvent.
Spray small on the G-XPC.
Not sure it fits your gun or cup? Send us a photo and we'll check.