Fuji Spray · Valor M100 air cap sets

Tune your Valor M100
to the coating.

Genuine Fuji 8200M air cap sets for the Valor M100 compressor spray gun, in 5 sizes from 1.2 to 2.1 mm. Change sizes to suit the coating you're spraying.

5sizes, 1.2 to 2.1 mm
1.3 mmthe standard size
GenuineFuji Spray part
Valor M100gun only

Fuji 8200M Air Cap Sets for the Valor M100 Spray Gun, 1.2 to 2.1 mm

En stock
SKU: 8200M-1.2 UPC: 612850820020
5 sizes · 1.2 to 2.1 mm · Valor M100 only
Prix habituel $89.90 CAD
Size
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!

Genuine Fuji 8200M air cap sets for the Fuji Valor M100 compressor spray gun. Choose from 5 sizes from 1.2 to 2.1 mm, so one Valor M100 can handle more than one coating. The Valor M100 comes with the 1.3 mm size installed.

Key Features & Benefits

  • 5 sizes, 1.2 to 2.1 mm: match the cap to your coating.
  • Made for the Valor M100: a correct fit on your gun.
  • Standard size 1.3 mm: the size installed on the Valor M100.
  • Genuine Fuji Spray parts from Toronto, Canada.

Compatibility

8200M sets fit only the Fuji Valor M100 compressor spray gun. Fuji makes separate 8350H sets for the Valor H100. They don't fit Fuji HVLP turbine guns. See all compressor spray guns.

Which Size Do I Need?

Size Part Use it for
1.2 mm 8200M-1.2 The smallest set, for thin coatings and a fine pattern.
1.3 mm 8200M-1.3 The set that comes on the Valor M100, for clear coat.
1.4 mm 8200M-1.4 A step up from the standard set.
1.7 mm 8200M-1.7 Heavier coatings and more output.
2.1 mm 8200M-2.1 The largest set, for the thickest coatings.

Product Specifications

Part numbers 8200M-1.2 (1.2 mm), 8200M-1.3 (1.3 mm), 8200M-1.4 (1.4 mm), 8200M-1.7 (1.7 mm), 8200M-2.1 (2.1 mm)
Includes One air cap set in the size you choose
Fits Fuji Valor M100 compressor spray gun only
Standard size 1.3 mm
Coatings Clear coat, waterborne or solvent-based
Brand Fuji Spray, Toronto, Canada

How to Change an Air Cap Set

  1. Clean and disconnect. Flush the gun with the right cleaner, then disconnect it from the air supply.
  2. Remove the air cap. Unscrew the retaining ring at the front of the gun and lift off the air cap.
  3. Pull the needle. Back out the fluid control knob, remove the spring, then squeeze the trigger and slide the needle out.
  4. Remove the nozzle. Unscrew the fluid nozzle with a spray gun wrench.
  5. Fit the new size. Install the nozzle snugly, then the needle, spring, knob, air cap and retaining ring on the Valor M100. Keep the air cap, needle and nozzle matched in size.
  6. Test on a panel. Set the pressure at the gun inlet, then adjust the fan and fluid flow until the pattern is even.

Why Buy From The Paint People?

We're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock gun cleaning kits, strainers and other genuine Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our best price guarantee beats a lower price on the same item. See the full Fuji Spray range.

Will it fit?

Made for the Fuji Valor M100.

8200M sets fit only the Fuji Valor M100 compressor spray gun.

Use the right set

Fuji makes separate air cap sets for each compressor gun. Order a different set for:

  • The Valor H100: use Valor H100 sets (8350H).
  • Fuji HVLP turbine guns, which take their own sets.
  • Other brands' guns. Not sure what you have? Send us a photo.

Size guide

Match the cap to the coating.

Smaller sets suit thinner coatings and a finer pattern. Larger sets move heavier coatings. Start with the standard size and go from there.

Finest

1.2mm

The smallest set, for thin coatings and a fine pattern.

$89.90#8200M-1.2
Standard set

1.3mm

The set that comes on the Valor M100, for clear coat.

$89.90#8200M-1.3
Medium

1.4mm

A step up from the standard set.

$89.90#8200M-1.4
Medium-heavy

1.7mm

Heavier coatings and more output.

$89.90#8200M-1.7
Heaviest

2.1mm

The largest set, for the thickest coatings.

$89.90#8200M-2.1

Always follow your coating maker's recommended set-up and test on a panel first.

Not sure? Start with 1.3 mm.

It's the size that comes on the Valor M100. Add a second size when you switch to a thinner or heavier coating.

Specifications

Valor M100 air cap specs.

Part numbers8200M-1.2 (1.2 mm), 8200M-1.3 (1.3 mm), 8200M-1.4 (1.4 mm), 8200M-1.7 (1.7 mm), 8200M-2.1 (2.1 mm)
IncludesOne air cap set in the size you choose
FitsFuji Valor M100 compressor spray gun only
Standard size1.3 mm
CoatingsClear coat, waterborne or solvent-based
BrandFuji Spray, Toronto, Canada

Changing sizes

Swap sizes in six steps.

  1. 1Clean and disconnectFlush the gun with the right cleaner, then disconnect it from the air supply.
  2. 2Remove the air capUnscrew the retaining ring at the front of the gun and lift off the air cap.
  3. 3Pull the needleBack out the fluid control knob, remove the spring, then squeeze the trigger and slide the needle out.
  4. 4Remove the nozzleUnscrew the fluid nozzle with a spray gun wrench.
  5. 5Fit the new sizeInstall the nozzle snugly, then the needle, spring, knob, air cap and retaining ring on the Valor M100. Keep the air cap, needle and nozzle matched in size.
  6. 6Test on a panelSet the pressure at the gun inlet, then adjust the fan and fluid flow until the pattern is even.

Why buy from us

A spray shop, not just a website.

Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.

FAQ

Valor M100 air cap questions, answered.

Which gun do 8200M air cap sets fit?

Only the Fuji Valor M100 compressor spray gun. Fuji makes separate 8350H sets for the Valor H100.

Which size comes on the Valor M100?

The Valor M100 comes with the 1.3 mm air cap installed.

What's included in a set?

One genuine Fuji Valor M100 air cap set in the size you choose. Not sure what you need for your gun? Ask us before you order.

Which size should I choose?

Start with the 1.3 mm set that comes on the Valor M100 for clear coat. Go smaller for thinner coatings, or larger for heavier coatings. Your coating maker's set-up sheet is the best guide.

Do I need to thin my coating?

Follow your coating maker's thinning and spray gun set-up. Bigger sets suit heavier coatings, but always test on a panel before you spray the job.

Can you service my gun?

Yes, once it's out of warranty. Our Rockwood Village spray centre in Mississauga repairs spray guns. Contact us to book it in. Still under Fuji's 24-month warranty? Contact Fuji Spray first.

Get the most from your Valor M100.

Tell us what you're spraying. We'll help you pick the size.