Fuji Spray · Turbine filters
Fresh filters.
Happy turbine.
Genuine Fuji 4009-2 filters for Semi-PRO 2, Hobby-PRO 2 and older Mini-Mite turbines. The 2-pack gives you a coarse and a fine square filter, the pair your turbine takes.
2filters per pack
Coarseand fine filter
SquareDIY-PRO shape
Washableeasy upkeep
Filtres de turbine Fuji Spray pour modèles DIY-PRO / Mini Mite plus anciens (forme carrée), 4009-2, lot de 2
Square · 2-pack · DIY-PRO and older Mini-Mites
Prix habituel
$11.45 CAD
Impossible de charger la disponibilité du service de retrait
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
Ces filtres haute performance sont conçus spécifiquement pour améliorer le flux de travail de tous les anciens modèles Mini-Mite, Semi-PRO et Hobby-PRO Turbines. Parfaits pour tout travail de peinture, ces filtres ultra-durables permettront à l'air de circuler librement et efficacement, tout en protégeant à la fois votre équipement et l'environnement.
⭐ Vendus par paire
⭐ Le filtre grossier va du côté droit (tel que vu en regardant l'avant du boîtier), le filtre fin va du côté gauche.
⭐ Filtre pour les anciens modèles Mini-Mite, Semi-PRO, Hobby-PRO Turbines
⭐ Facilement lavable
⭐ Facilement remplaçable
⭐ Dimensions de l'emballage : 4,064 L x 20,828 H x 10,668 W (centimètres)
Will it fit?
Made for DIY-PRO and older Mini-Mite turbines.
The 4009-2 fits the Semi-PRO 2, Semi-PRO 2 Gravity and Hobby-PRO 2, the DIY-PRO turbine sold on its own, and older Mini-Mites with square filters.
Semi-PRO 2
2-stage DIY-PRO, bottom feed.
$679Semi-PRO 2 Gravity
2-stage DIY-PRO, gravity feed.
$679Hobby-PRO 2
2-stage DIY-PRO, 1.8 mm cap.
$679DIY-PRO turbine
Semi-PRO 2 / Hobby-PRO 2 turbine only.
$489Have a different turbine?
The 4009-2 doesn't fit newer Fuji turbines.
- Mini-Mite 3, 4 and 5 Platinum take 7224-2 filters.
- Q3, Q4 and Q5 Platinum take the 5029 filter.
- The D6 takes D6 foam, HEPA and intake filters.
Compare
Which Fuji filter do I need?
Each Fuji turbine family takes its own filter. They aren't interchangeable, so match the filter to your turbine.
| 4009-2This filter | 7224-2 | 5029 | D6 filters | |
|---|---|---|---|---|
| Fits | Semi-PRO 2, Hobby-PRO 2 and older Mini-Mites | Mini-Mite 3, 4 and 5 Platinum | Q3, Q4 and Q5 Platinum | D6 6-stage |
| Shape | Square | Semi-circle | Single pad | Foam pre-filter, HEPA and motor intake |
| Pack | 2 filters | 2 filters | 1 filter | Sold singly or as a 4-piece set |
| Per turbine | 2 (one pack) | 2 (one pack) | 1 | Foam, HEPA and intake filters |
| Price | $11.45 | $11.85 | $11.75 | $13.95 |
Fit as listed by Fuji Spray. Prices are live.
Why genuine Fuji
Two filters, two jobs.
Coarse and fineThe coarse filter catches the bigger dust, the fine filter the rest, so the motor breathes clean air.
WashableRinse a dusty filter and let it dry fully before you refit it. Replace it when it's worn or won't come clean.
Quick to changeSquare filters slide in and out of the case in a minute.
What's included
Both filters, one pack.
In the 4009-2 pack
- 2 square 4009-2 turbine filters: one coarse, one fine
- Enough to replace both filters in one turbine
Specifications
4009-2 filter specs.
| Part number | 4009-2 |
|---|---|
| Pack | 2 filters, one coarse and one fine |
| Shape | Square |
| Placement | Coarse filter on the right, fine filter on the left, seen from the front of the case |
| Fits | Fuji Semi-PRO 2, Hobby-PRO 2 and other DIY-PRO turbines, and older Mini-Mite models |
| Filters per turbine | 2 |
| Care | Washable |
| Does not fit | Mini-Mite Platinum (use 7224-2), Q Platinum (use 5029) or D6 |
| Package size | 4.06 × 20.83 × 10.67 cm |
| Brand | Fuji Spray, Toronto, Canada |
How to
Change the filters in minutes.
- 1Switch offTurn off and unplug the turbine, and let it cool if you've been spraying.
- 2Find the filtersThe two square filters sit in the turbine case, side by side.
- 3Remove the old filtersPull them out and check the housing. Wipe away any dust.
- 4Fit the new filtersFit the coarse filter on the right and the fine filter on the left, as seen from the front of the case. Press them in so they sit flat.
- 5Run a quick checkSwitch on and make sure the turbine sounds normal and air flows freely at the gun.
- 6Check them oftenLook at the filters every few jobs and replace them as soon as they look dirty or clogged.
Goes with it
More for your turbine.
Filters, turbines and upkeep supplies, all genuine Fuji.
7224-2 filters, 2-pack
Semi-circle. Mini-Mite Platinum only.
$11.855029 filter
For Q3, Q4 and Q5 Platinum turbines.
$11.75DIY-PRO turbine
Semi-PRO 2 / Hobby-PRO 2 turbine only.
$4897020 air caps
Caps for M-Model guns.
$79.45Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.35Why buy from us
A spray shop, not just a website.
Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.
FAQ
4009-2 filter questions, answered.
Which side does each filter go on?
The coarse filter goes on the right and the fine filter on the left, as seen when you look at the front of the case.
Can I wash the filters?
Yes, they're washable. Let them dry completely before you put them back, and replace them when they're worn or won't come clean.
Will it fit my Mini-Mite?
It fits older Mini-Mites with square filters. Mini-Mite Platinum turbines take semi-circle 7224-2 filters instead.
Which filter does my Fuji turbine need?
Mini-Mite 3, 4 and 5 Platinum: two 7224-2 filters. Semi-PRO 2, Hobby-PRO 2 and older Mini-Mites: two 4009-2 filters. Q3, Q4 and Q5 Platinum: one 5029 filter. D6: D6 foam, HEPA and motor intake filters.
Why change turbine filters?
The filters stop dust and overspray from being drawn into the motor. A clogged filter starves the turbine of air, so it runs hotter and delivers less to the gun. Clean filters protect the motor and keep the air at the gun clean.
Not sure which turbine you have?
Send us a photo of the turbine and its model plate through our contact page, or bring the old filter to our Rockwood Village spray centre in Mississauga and we'll match it.
Keep your turbine breathing easy.
Not sure which filter fits? Tell us your turbine model, or send a photo, and we'll match it.