3M PPS 2.0 Adapter Type S24 26110 for Fuji G-XPC

The 3M PPS 2.0 Adapter, Type S24 (26110) converts the Fuji Spray G-XPC and GT-X2 side-cup gravity guns to the 3M PPS Series 2.0 disposable cup system. It has a right-angle, side-cup-mount design with a 1/4"-18 NPS female thread, made for guns that carry their cup on the side. You mix, filter and spray from a disposable lid and liner, then throw them away, leaving only the gun and adapter to clean. For cabinet painters and finishers already using the G-XPC for tight spots and overhead work, it's the fastest way to cut clean-up and colour-change time.

Key Features & Benefits

• Made for side-cup guns. Right-angle side-cup mount fits the Fuji G-XPC and GT-X2.
• Keep your gun. Remove the existing cup and thread the S24 on. No new spray gun needed.
• Four-point connection on a wide 360° platform. The PPS 2.0 lid connects at four points for a stable fit.
• Stainless steel. Resists solvents and holds up to daily cleaning.
• Wide bowl design. Wipes clean fast between jobs.
• Less solvent, faster clean-up. 3M reports up to 70% less cleaning solvent and up to 50% less prep and clean-up time than conventional cups.

Applications & Recommended Uses

Use the S24 on side-cup gravity guns with a 1/4"-18 NPS inlet. It's a good fit for:

• Cabinet interiors, shelving and overhead work, where a side cup and an any-angle liner shine
• Furniture, trim and millwork finishing with lacquers, primers and waterborne coatings
• Touch-ups and small batches you want to mix, spray, then seal and save
• Jobs with frequent colour changes, where a fresh liner means no cup to wash

PPS 2.0 is a closed system, so you can spray at any angle, even upside down.

How to Install and Use

1. Remove the existing side cup from your spray gun.
2. Thread the S24 adapter onto the gun's cup inlet until snug.
3. Mix your coating in a PPS 2.0 liner inside the hard cup, using the mix ratios printed on the cup.
4. Lock the lid onto the cup with a quarter turn, then attach the cup to the adapter.
5. Spray. When you're done, cap the lid with a sealing plug to save leftover material, or throw away the lid and liner.
6. Clean the gun and adapter with a small amount of the right solvent or water for your coating.

PPS 2.0 lids have a built-in 125 or 200 micron filter. Follow your coating maker's filter recommendation.

Why Buy From The Paint People?

We're a family-run Mississauga paint business that has served painters since 1997. We sell the Fuji G-XPC and 3M PPS 2.0 cups and liners, so you can set up your side-cup gun in one order. Not sure which adapter fits? Email info@thepaintpeople.com with your gun's make and model and we'll point you to the right one.

Specifications

Compatible Spray Guns

3M lists the S24 (26110) for these guns:

• Fuji Spray: G-XPC, GT-X2
• Kobalt: KC-588CSCG, SGY-AIR87
• Snap-on: BF515 R-Angle Mini

Using a top-cup Fuji T75G? You need the S2c adapter. For the bottom-feed Fuji T70 or M-Model, choose the S18 adapter.

FAQs

Will the S24 adapter fit my Fuji G-XPC?

Yes. The S24 (26110) is the PPS 2.0 adapter 3M lists for the Fuji G-XPC and GT-X2.

What's the difference between the S24 and the S2c?

The S24 is a right-angle, side-cup mount with a 1/4"-18 NPS thread for side-cup guns like the G-XPC. The S2c is a straight M16 x 1.5 adapter for top-cup gravity guns like the Fuji T75G.

Does it work with original PPS cups and lids?

No. 3M designs Series 2.0 adapters for PPS Series 2.0 lids, liners and cups only.

Does it come with cups, lids or liners?

No, this is the adapter only. Pair it with a PPS 2.0 lid and liner kit, such as the Midi 400 mL kit (26112).

Can I spray overhead with the S24 and PPS 2.0?

Yes. The liner collapses as you spray, so the gun works at any angle, including straight up or upside down.

How do I clean the adapter?

The lid and liner are disposable, so only the gun and adapter need cleaning. Flush or wipe the adapter with a small amount of the right solvent or water.