Fuji Spray · G-XPC cup assembly
More cup
for your G-XPC.
The genuine Fuji 9870 is a 600 mL nylon side-mount gravity cup for the G-XPC, half again the size of the 400cc cup that comes on the gun. Its screw-in lid seals without a gasket, and the pressure tube has a check valve.
600 mLnylon side-mount cup
+200mL over the 400cc cup
Nogasket to replace
G-XPCXPC-Series gravity guns
Fuji 600cc Assemblage de tasse à gravité en nylon pour GXPC
600cc nylon side-mount cup · No gasket · G-XPC
Prix habituel
$101.85 CAD
Impossible de charger la disponibilité du service de retrait
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
Déchaînez le véritable potentiel de votre pistolet à peinture G-XPC avec l'ensemble de godet en nylon gravitaire Fuji de 600 cc
Élevez votre expérience de pulvérisation
Conçu exclusivement pour le pistolet à peinture G-XPC sophistiqué, l'ensemble de gobelet en nylon à gravité de 600 cc de Fuji est conçu pour offrir des performances supérieures et une commodité inégalée. Cet accessoire essentiel n'est pas seulement un ajout ; c'est une amélioration substantielle qui transforme vos tâches de pulvérisation en une œuvre d'art sans couture.
Caractéristiques et Avantages Clés
- 600cc Tasse à gravité en nylon:
Une capacité généreuse pour garantir des sessions de pulvérisation ininterrompues, vous permettant de vous concentrer sur l'obtention de la finition parfaite sans recharges fréquentes.
- Tube de pression de précision avec valve de retenue:
Équipé d'un raccord en L et d'un filetage, ce tube de pression garantit un flux de matériau constant et empêche le reflux, vous offrant un contrôle total sur vos motifs de pulvérisation.
- Conception de couvercle à vis innovante:
Dites adieu aux joints encombrants ! Cette technologie de couvercle avancée garantit un sceau exceptionnel, maintenant une pression optimale et minimisant les fuites, afin que vous puissiez travailler en toute tranquillité d'esprit.
Une Amélioration Précieuse
Pour les professionnels cherchant à améliorer la fonctionnalité de leur pistolet à peinture G-XPC, l'ensemble de godet en nylon de 600 cc de Fuji est un investissement dans la qualité et l'excellence. Que vous soyez un professionnel chevronné ou un bricoleur enthousiaste, cette mise à niveau garantit que vos projets de pulvérisation sont réalisés avec précision et finesse.
Élevez votre savoir-faire à de nouveaux sommets avec l'ensemble de gobelet gravité en nylon Fuji 600cc—où l'innovation rencontre la durabilité pour des performances de pulvérisation inégalées.
Will it fit?
Made for Fuji XPC-Series gravity guns.
The 9870 fits the G-XPC side-mount gravity gun (9600-G), the G-XPC option on Fuji Mini-Mite, Q Platinum and D6 systems.
Need a different cup?
Side-mount cups are made for the G-XPC only.
- The standard size: the 9850 400cc G-XPC cup.
- T75G gun: the 9860 600 mL cup.
- Other Fuji guns: send us a photo and we'll find the right cup.
Why upgrade
A bigger cup for the G-XPC.
600 mL capacityFewer refills than the 400cc cup on cabinet boxes, doors and trim.
Screw-in lid, no gasketThe redesigned lid seals without a gasket, so there's one less part to wear out.
Check-valve pressure tubeWith an L fitting and flare, it keeps coating from backing up into the tube.
What's included
Ready to fit.
In the 9870 assembly
- 600 mL nylon side-mount gravity cup
- Screw-in lid
- Pressure tube with check valve, L fitting and flare
Specifications
9870 cup specs.
| Part number | 9870 |
|---|---|
| Capacity | 600 mL |
| Material | Nylon |
| Type | Side-mount gravity cup assembly |
| Includes | 600 mL nylon side-mount gravity cup, screw-in lid and pressure tube with check valve, L fitting and flare |
| Lid seal | Screw-in lid, no gasket needed |
| Fits | Fuji G-XPC (9600-G) and other XPC-Series gravity guns |
| Brand | Fuji Spray, Toronto, Canada |
Care
Keep the cup clean and sealing.
- 1Strain every fillStrain the coating into the cup so debris doesn't reach the nozzle.
- 2Empty and wipeAfter spraying, pour out what's left and wipe the cup with a cleaner-soaked rag.
- 3Flush the gunHalf-fill the cup with cleaner, swirl it, then open the fluid knob and trigger to flush it through.
- 4Clean the lidClean the inside and outside of the cup and lid.
- 5Check the tubeLook for dried coating on the pressure tube and replace it if it's blocked.
- 6Check the sealReplace the gasket or diaphragm when it's worn or swollen so the cup holds pressure.
Goes with it
More for your G-XPC.
Cups, caps, gaskets and a rebuild kit, all genuine Fuji.
9850 400cc G-XPC cup
Replacement side-mount cup assembly.
$68.658050 air caps
Caps for the G-XPC gun.
$95.359610 G-XPC rebuild kit
Rebuild kit for G-XPC and XPC guns.
$47.659050 cup gaskets, 5-pack
Gaskets for 400cc gravity cups.
$26.05Gravity cup lids and gaskets
Lids, 600 mL and 1000 mL gaskets and fittings.
$6.655330 gun holder stand
Holds a gravity gun upright to fill and clean.
$21.95Gun cleaning kit
Brushes and lubricant for every clean-up.
$37.95Cone strainers, 40-pack
Strain every coat for a clean finish.
$15.35Why buy from us
A spray shop, not just a website.
Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.
FAQ
9870 cup questions, answered.
Which gun does the 9870 cup fit?
The Fuji G-XPC side-mount gravity gun (9600-G) and other XPC-Series gravity guns, including the G-XPC option on Mini-Mite, Q Platinum and D6 systems.
What's included?
600 mL nylon side-mount gravity cup, screw-in lid and pressure tube with check valve, L fitting and flare.
Does it need a gasket?
No. The screw-in lid seals without one.
9870 or 9850?
The 9850 is the 400cc aluminum cup that comes on the G-XPC. The 9870 holds 600 mL in nylon, for fewer refills on bigger jobs.
Will it fit the T75G?
No. The T75G takes centre-mount cups like the 9860.
How do I clean it?
Empty it, wipe it with a cleaner-soaked rag, flush the gun with cleaner, and check the pressure tube. Never soak the whole gun in solvent.
Spray longer between refills.
Not sure which cup fits your gun? Send us a photo and we'll check.