Fuji Spray · Bottom-feed cup assembly
The quart cup
on today's Fuji guns.
The genuine Fuji 2095 is the 1 quart aluminum cup assembly Fuji has fitted to its bottom-feed guns since September 2019. It comes complete with the pressure tube, a fitted gasket and a flat diaphragm.
1 qtaluminum bottom-feed cup
90°nipple on the lid
2019+Fuji bottom-feed guns
Sparesall in stock
Fuji 2095 Assembled 1Qt. Cup - 90 Degree Nipple
1 qt aluminum cup · Tube, gasket and diaphragm · Bottom feed
Prix habituel
$79.95 CAD
Impossible de charger la disponibilité du service de retrait
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
Il s'agit de l'ensemble actuel installé sur les pistolets de pulvérisation à alimentation inférieure Fuji Spray (depuis septembre 2019). L'ensemble comprend le tube de pression, un joint d'étanchéité ajusté et un diaphragme plat.
L'ensemble de tasse standard est fourni sans revêtement à l'intérieur. Il peut être utilisé avec tous les produits, bien que certains revêtements à base d'eau puissent provoquer des taches disgracieuses à l'intérieur de la tasse (généralement inoffensives et n'affectant jamais la finition réelle).
Will it fit?
Made for Fuji bottom-feed guns.
The 2095 is the quart cup Fuji has fitted to its bottom-feed guns since September 2019, including the T70 and the M-Model 7001 and 7003.
T70 bottom-feed gun
T-Model gun with a 1 L bottom-feed cup.
$5197001 M-Model gun
Bottom feed. The gun on the Semi-PRO 2.
$3197003 M-Model gun, black
Black, 1.8 mm cap. The gun on the Hobby-PRO 2.
$319Older cup or gravity gun?
Cups and seals changed in fall 2019.
- Older 2042 cups use different gaskets and the 2039 parts kit. Send us a photo if you're not sure which you have.
- Gravity guns use a gravity cup, like the 9860 for the T75G.
Know your cup
Built to hold pressure.
Diaphragm-protected tubeA flat diaphragm keeps coating out of the pressure tube.
Uncoated aluminumWorks with all coatings. Some waterborne coatings can stain the inside, which is harmless and never affects the finish.
Every part sold separatelyCup body, gaskets, diaphragms, strainers and a full parts kit are all in stock.
What's included
Ready to screw on.
In the 2095 assembly
- 1 qt aluminum cup, uncoated inside
- Lid with 90 degree nipple
- Pressure tube
- Fitted gasket
- Flat diaphragm
Specifications
2095 cup specs.
| Part number | 2095 |
|---|---|
| Capacity | 1 qt (about 1 L) |
| Material | Aluminum, uncoated inside |
| Type | Bottom-feed (siphon) cup assembly |
| Includes | Cup, lid with 90 degree nipple, pressure tube, fitted gasket and flat diaphragm |
| Fits | Fuji bottom-feed guns made since September 2019, including the T70 and M-Model 7001 and 7003 |
| Wear parts | 2098 parts kit, 2097-10 gaskets, 2096-3 diaphragms, 9055-10 strainers |
| Brand | Fuji Spray, Toronto, Canada |
Care
Keep the cup clean and sealing.
- 1Strain every fillStrain the coating into the cup so debris doesn't reach the nozzle.
- 2Empty and wipeAfter spraying, pour out what's left and wipe the cup with a cleaner-soaked rag.
- 3Flush the gunAdd some cleaner to the cup, screw it back on and spray it through until it runs clean.
- 4Clean the strainerClean the mesh strainer on the fluid tube, or soak it in thinner.
- 5Check the diaphragmReplace the diaphragm if coating has reached it, so paint can't get into the pressure tube.
- 6Check the gasketReplace the lid gasket when it's worn or swollen so the cup holds pressure.
Goes with it
Spares for the 2095.
Every wear part for the 2095, all genuine Fuji.
2098 cup parts kit
Wear parts for the 2095 quart cup.
$45.752097-10 lid gaskets
10-pack for the 2095 quart cup.
$43.752096-3 diaphragms, 3-pack
Spare diaphragms for the 2095 quart cup.
$16.459055-10 cup strainers
Stainless mesh for the 2095 fluid tube. 10-pack.
$26.452092 1 qt aluminum cup
Replacement cup body for the 2095.
$39.352093T Teflon-coated cup
1 qt cup body for corrosive waterborne coatings.
$44.955448-20 cup liners
1 qt and 2 qt liners. 20-pack.
$16.559960 gravity conversion kit
Turns a Fuji bottom-feed gun into a gravity gun.
$78.35Why buy from us
A spray shop, not just a website.
Real spray peopleOur Rockwood Village spray centre in Mississauga sells, rents and repairs sprayers. Ask us about caps, thinning and set-up before you buy.
Parts in stockFilters, air caps, cups, hoses and rebuild kits sit beside the systems, so a $12 filter doesn't take weeks.
Best price beatFind the same Fuji for less and we'll beat the price. How it works.
Family-run since 1997Free shipping on orders over $249 in Canada (excluding the territories), and 35-day returns on unused equipment.
FAQ
2095 cup questions, answered.
Which guns does the 2095 fit?
Fuji bottom-feed guns made since September 2019, including the T70 and the M-Model 7001 and 7003. If your gun is older, send us a photo and we'll check.
What's included?
The 1 qt aluminum cup, the lid with a 90 degree nipple, the pressure tube, a fitted gasket and a flat diaphragm.
My waterborne coating stains the cup. Is that a problem?
No. The stain is usually harmless and never affects the finish. For corrosive waterborne coatings, switch to the 2093T Teflon-coated cup.
Does it fit the older 2042 cup parts?
No. Gaskets and parts changed in fall 2019. The 2098 kit, 2097 gaskets and 2096 diaphragms fit the 2095 only.
Which wear parts should I keep on hand?
The 2098 cup parts kit has three diaphragms, three gaskets and three pressure tubes. Gaskets and diaphragms are also sold in packs.
Can I turn my bottom-feed gun into a gravity gun?
Yes. The 9960 gravity conversion kit fits Fuji bottom-feed guns.
Keep your bottom-feed gun spraying.
Not sure which cup you have? Send us a photo and we'll check.