Flame Control coatings

Flame Control
fire retardant paint.

Class A fire retardant paint for interior and exterior wood, and a sprayable thermal barrier for spray foam insulation. Flame Control has made fire retardant coatings for over 35 years, with a Canadian office in Ajax, Ontario. We ship them across Canada.

Class Afire retardant paints, rated under CAN/ULC S-102
1 coatthermal barrier for spray foam, no primer
1997the year our family opened in Mississauga
$249+orders ship free across Canada

Coating finder

What are you coating?

Tap the one that matches your job. We'll point you to the right coating, and the next-best option.

Our pick for you

Shop

Know what you need

Fire retardant or thermal barrier?

They sound alike, but they do different jobs and are tested in different ways. Start with what the code or your inspector is asking for.

Fire retardant paint

Slows flame spread on wood.

Coats combustible surfaces like lumber, plywood and OSB so flames spread across them more slowly.

Tested by
Flame spread, CAN/ULC S-102 (ASTM E-84). Class A is 25 or less.
Our picks
20-20A inside, Exterior Guard outside

Thermal barrier

Covers spray foam.

Separates foam plastic insulation from the room, where codes would otherwise call for a barrier like drywall.

Tested by
CAN/ULC S-101 in Canada, NFPA 286 in the US.
Our pick
60-60A, one sprayed coat
!None of these make a surface fireproof. Ratings hold only at the tested coverage rate, on the tested surface. Check with your local fire or building official before you buy.

Compare

Side by side.

Testing, coverage and colours for every fire retardant coating we carry.

Product20-20AInteriorExterior GuardExterior basecoat60-60ASpray foamINSL-X FR-210Also consider
Use onInterior wood, plywood, OSBExterior wood under siding or claddingSpray polyurethane foamInterior wood, drywall, plaster, masonry, metal
TestingClass A, CAN/ULC S-102Class A, CAN/ULC S-102CAN/ULC S-101-14; NFPA 286Class A, CAN/ULC S-102 and ASTM E84
30-minuteTwo coats at 200 sq ft/galTwo coats at 200 sq ft/gal—Two coats (ASTM E2768)
Coverage155 sq ft per 3.78 L150–155 sq ft per 3.78 L80 sq ft per 3.79 L150 sq ft per 3.79 L
ColoursWhite, blackWhite, grey, blackWhite, grey, blackWhite
Dry to touch30 min30 min1–2 hours30 min
TopcoatOptional (40-40A)Only if exposedOptionalOptional
Sizes3.78 L3.78 L, special order3.79 L; 18.9 L special order3.79 L, 18.9 L
PriceFrom $309.90From $331.90From $293.90From $147.93

From each maker's Canadian data sheet. Prices are live.

Special order

Need something else from Flame Control?

We stock 20-20A and 60-60A. Everything else in the Flame Control line, we can bring in for your job. Ask us for pricing and timing.

Paints and topcoats

  • Exterior Guard Basecoat exterior Class A basecoat (on our site)
  • Exterior Guard Topcoat semi-gloss topcoat for Exterior Guard
  • No. 40-40A low-gloss Class A topcoat for 20-20A or 10-10A
  • No. 10-10A solvent-based Class A interior paint

Clear wood finishes

  • No. 6, 166, 167 Class A clear varnish system
  • No. 129, 130 Class B clear varnish system
  • No. 133A, 141 Class B fire retardant polyurethanes
  • No. 10VOC Class B exterior penetrating wood treatment

Specialty

  • No. E-119 two-hour rated intumescent paint that extends drywall assembly ratings
  • No. 60-60A, 18.9 L pails of our spray foam thermal barrier

Get it right

A rating is only as good as the application.

  1. Know the ratingAsk your fire or building official what your job needs: Class A, a 30-minute rating, or a thermal barrier.
  2. Prep and primeClean, dry and sound surfaces. Prime new wood and any metal as the data sheet says.
  3. Apply the full rateCoverage is part of the rating. Use the calculator on each product page so you buy enough.
  4. Measure as you goCheck thickness with a wet film gauge, and keep the data sheet for your inspector.

Why buy from us

Paint people, not just a website.

1Family-run since 1997Three Mississauga stores that serve painting contractors every day. Ask us before you buy.
2Spray equipment tooNeed a rig for 60-60A? Our Rockwood Village spray centre handles airless sprayer sales, rentals and repairs.
3Best price guaranteeFind a lower price on the same item and we'll beat it. See how it works.

FAQ

Flame Control questions, answered.

What does Flame Control make?

Fire retardant and heat resistant coatings. We carry three: 20-20A, a Class A interior fire retardant paint; Exterior Guard Basecoat, its exterior version; and 60-60A, a thermal barrier coating for spray foam insulation.

What's the difference between a fire retardant paint and a thermal barrier?

A fire retardant paint slows flames spreading across the surface it coats, like wood or plywood, and is rated by flame spread (Class A is 25 or less). A thermal barrier separates foam plastic insulation from the room and is tested differently. 20-20A and Exterior Guard are fire retardant paints; 60-60A is a thermal barrier.

Does fire retardant paint make wood fireproof?

No. It slows flame spread on the surface and insulates the wood for a time, which can buy time in a fire. It doesn't make anything fireproof, and the rating only holds at the tested coverage rate.

Which Flame Control paint is Class A?

Both 20-20A and Exterior Guard Basecoat are Class A under CAN/ULC S-102, with a flame spread of 5 on Douglas fir. Both have also been tested for 30 minutes with two coats at 200 sq ft per gallon each.

How much do I need?

20-20A and Exterior Guard cover about 150–155 sq ft per 3.78 L for Class A. 60-60A covers 80 sq ft per 3.79 L. Each product page has a calculator that works it out for your space.

Can I use Flame Control on spray foam?

Use 60-60A. It's made and tested as a thermal barrier over spray polyurethane foam. 20-20A and Exterior Guard are for wood and other combustible surfaces, not foam.

Can you get other Flame Control products?

Yes. We stock 20-20A and 60-60A, and we can special-order the rest of the Flame Control line, including Exterior Guard Basecoat and Topcoat, the 40-40A topcoat, solvent-based 10-10A, E-119 for drywall assemblies, and Class A and Class B clear fire retardant varnishes. Contact us with what you need.

Do I need a topcoat?

20-20A doesn't usually need one. Exterior Guard needs an exterior topcoat only if it's left exposed to sun and weather. 60-60A is tested with no topcoat, but you can add one to protect the colour. We can special-order Flame Control's 40-40A and Exterior Guard Topcoat.

Will it pass inspection?

That's up to your local fire or building official. Check what rating your job needs before you buy, show them Flame Control's data sheet, and apply at the tested rate. A wet film gauge helps you prove it.

Where can I buy Flame Control near Toronto?

At The Paint People, a family-run paint store in Mississauga since 1997. Order online and we'll ship across Canada, free on most orders over $249, or ask about picking up in Mississauga.

Not sure which coating your job needs?

Tell us what you're coating and what rating you need. We'll help you pick the product and work out how much to order.

3 produits