Benjamin Moore Floor & Patio · Porch and floor paint
Floors that look good.
Inside and out.
Floor & Patio is Benjamin Moore's epoxy-modified acrylic floor enamel for porches, patios, basements and breezeways. It goes on bare or painted concrete and painted wood floors, stands up to soaps, detergents, grease and oil, and dries to a smooth low sheen in any colour you choose.
1 hrdry to the touch*
4 hrto recoat*
$30.99946 mL from
$249+ships free in Canada
*At 25 °C and 50% humidity. Light traffic after an overnight dry. Not for floors you park on.
Kendall CharcoalHC-166 · try any colour
Peinture émail satinée pour sols et patios F122
Prix habituel
$30.99 CAD
Impossible de charger la disponibilité du service de retrait
✓ 10-Day Best Price Beat Guarantee: Found it cheaper? We'll beat it!
Benjamin Moore floor & patio est un émail acrylique à faible brillance de qualité supérieure, à séchage rapide et modifié à l'époxy. Une couche couvre la plupart des surfaces déjà peintes qui sont en bon état.
Recommandé pour : Applications résidentielles ou commerciales où une finition de qualité supérieure est souhaitée. Pour une utilisation intérieure et extérieure sur du béton non peint (neuf ou ancien) et des planchers en bois ou en béton déjà finis. Particulièrement recommandé pour les sous-sols, les vérandas, les patios, les couloirs, les salles d'exposition et les applications légères industrielles.
Limitations : De nombreux pneus contiennent des composés qui peuvent attaquer les peintures latex, entraînant une perte d'adhérence et un ramassage du film.
Couleurs — Standard : Blanc (01), Gris Platine (74)
Bases de teinte : Bases Benjamin Moore® Gennex® 1X, 2X, 3X, & 4X
Certifications & Qualifications : Conforme aux COV dans toutes les zones réglementées Qualifie pour le crédit LEED® v4 Qualifie pour le crédit d'émission faible CHPS (Collaborative for High Performance Schools) Certifié émission CDPH v1
Couverture : Environ 500-600 pi²/3,79 L
Temps de séchage @ 25 °C
Au toucher - 1 heure
Pour repeindre - 4 heures
Caractéristiques :
- Résistant aux savons et détergents, à la graisse et à l'huile
- Présente une apparence lisse et uniforme
- Une couche couvre la plupart des surfaces déjà peintes qui sont en bon état
- Facile à appliquer
Canada Shipping
- Enjoy free shipping in Canada on orders over $249. Yukon, NWT, Nunavut not included.
Winter Shipping:
- From December to April, shipping outside of Ontario and Quebec is limited.
- Returns accepted within 35 days from the date of delivery.
- Custom tinted paints are classified as Final Sale items and are not eligible for return or store credit.
Why Floor & Patio
One paint for porch, patio and basement.
Floor paint has to handle shoes, spills, mopping and weather. Floor & Patio is an epoxy-modified acrylic, so it's tougher than wall paint but still cleans up with soap and water.
01
Inside and out
Bare concrete (new or old) and previously finished wood or concrete floors, from basements to porches, patios and breezeways.
02
Easy to keep clean
Resists soaps, detergents, grease and oil, with a smooth, uniform low sheen that's easy to mop.
03
Quick to finish
Dry to the touch in an hour and ready for a second coat in 4. On most previously painted floors in fair to good condition, one coat covers.
Not for garage floors you park on: many tires contain compounds that attack latex floor paint. For garages, see GarageGuard 1-Part.
Paint calculator
How much do I need?
Enter the length and width of your floor. We'll work out the cans, using 500 sq ft per 3.79 L, the low end of Benjamin Moore's coverage so you don't run short.
ft
ft
Coats
You need
—
Set up for an 8 × 20 ft porch with 2 coats. A basement or garage-sized floor is often 400–500 sq ft. Bare concrete takes a thin primer coat of Floor & Patio plus 1–2 finish coats, and rough or porous concrete uses more.
Colour ideas
Start with the favourites.
Browse by colour family. Tap a colour to use it for your order, or search every Benjamin Moore colour in the box above Add to cart.
Choosing a floor colour? Mid-tone greys and charcoals hide dirt and scuffs best. Very dark colours show dust and get hot in full sun, and very light ones show footprints. Screen colours are a guide, so try a colour sample on your floor first.
Compare
Floor & Patio or GarageGuard?
Porch, patio, basement
Floor & Patio
- Best for
- Porches, patios, basements, breezeways and showrooms. Concrete or painted wood, inside or out.
- What you get
- Epoxy-modified acrylic in any colour, low sheen, dry in an hour. Not for parking on.
- From
Garage and driveway
GarageGuard 1-Part
- Best for
- Garage floors you drive on, plus driveways, patios and walkways.
- What you get
- No mixing, self-priming and resists hot tire pickup once it has hardened.
- From
Toughest indoor floor
GarageGuard Epoxy
- Best for
- Indoor garages, workshops and floors that take heavy wear and chemicals.
- What you get
- A true 2-part waterborne epoxy, semi-gloss, resists hot tires. Interior only.
- From
Need grip on steps or a ramp? See INSL-X Sure Step anti-slip coating, or browse all floor and masonry coatings.
Specs
The details.
| Type | Epoxy-modified acrylic latex floor enamel (F122) |
|---|---|
| Finish | Low sheen (10–25 @ 60°) |
| Coverage | 500–600 sq ft (46.4–55.7 m²) per 3.79 L |
| Coats | Bare concrete: thin self-priming coat + 1–2 finish coats. Painted floors: 1–2 coats |
| Dry time | Touch 1 hour. Recoat 4 hours. Light traffic after an overnight dry |
| Apply at | 10–32 °C (50–90 °F), air and surface |
| VOC | 45 g/L |
| Apply with | Nylon/polyester brush, 3/8 in roller or airless spray (1,500–2,500 PSI, .013–.015 tip) |
| Thinning | Not needed in mild weather. In hot, dry or windy conditions, up to 236 mL water or K518 Extender per 3.79 L |
| Clean-up | Warm soapy water. Mineral spirits rinse for spray equipment |
| Colours | White, Platinum Grey, or tinted to almost any Benjamin Moore colour |
| Certified | CDPH v1 emissions certified, LEED v4 and CHPS eligible |
Dry times at 25 °C and 50% humidity. Cool, damp weather takes longer. Protect from freezing.
How to apply
Get a floor that lasts.
- Clean it well. Remove dirt, grease, oil, wax, mildew and loose paint. Scrub with a cleaner like TSP, rinse and let it dry. Sand peeling edges smooth and dull glossy areas.
- Prep bare concrete. Let new concrete cure 30 days and remove curing compounds. Etch smooth concrete with a concrete etch or 10% muriatic acid, then rinse off all powder and let it dry.
- Prime where needed. On bare concrete, a thin first coat of Floor & Patio is the primer. Prime bare wood with Fresh Start.
- Check the weather. Air and surface between 10 °C and 32 °C. Outside, skip days with rain in the forecast.
- Cut in, then roll with a 3/8 in roller, working toward your exit. Second coat after 4 hours.
- Let it dry overnight before light foot traffic, and longer before moving furniture back.
FAQ
Questions, answered.
Can I use it on my garage floor?
Not where you park. Many tires contain compounds that attack latex floor paint and can lift it. For garages, use GarageGuard 1-Part or GarageGuard Epoxy, which resist hot tire pickup. Floor & Patio is great for basements, porches, patios, breezeways and showrooms.
Can I use it outside on a porch or patio?
Yes. It's made for interior and exterior floors: bare concrete (new or old) and previously finished wood or concrete. Apply when the air and surface are between 10 °C and 32 °C.
Do I need a primer?
On bare concrete, the first thin coat primes itself. Let it dry 4 hours, then add 1–2 finish coats. Previously painted wood or concrete needs no separate primer, just 1–2 coats. Prime bare wood with Fresh Start High-Hiding Primer first.
How do I prep new concrete?
Let new concrete cure for 30 days, then clean off form release agents and curing compounds. Smooth poured or precast concrete must be etched with a concrete etch or 10% muriatic acid solution, then rinsed free of powder and loose particles.
How much do I need?
A 3.79 L can covers 500–600 sq ft per coat and a 946 mL can roughly a quarter of that. Bare concrete takes a primer coat plus 1–2 finish coats, previously painted floors 1–2 coats. Use the calculator above.
When can I walk on it?
It's dry to the touch in 1 hour and ready to recoat in 4 hours at 25 °C and 50% humidity. It takes light traffic after an overnight dry. Cool, damp weather slows everything down, so give it longer outside in spring and fall.
Is it slippery?
Any floor paint can be slippery when wet. Benjamin Moore recommends adding an anti-slip aggregate where you need grip. For steps and ramps, a textured coating like INSL-X Sure Step is another option.
Can I use it on my deck?
What colours can I get?
Almost any Benjamin Moore colour (Color Stories colours aren't available in this paint), and we can match other brands. White and Platinum Grey are the standard colours. Tinted paint is made to order, so it's final sale.
Sizes and shipping?
946 mL and 3.79 L. We ship across Canada, free on most orders over $249, or pick up free in Mississauga.
Ready to refresh your floor?
Not sure about the colour? Try a colour sample, book a Virtual Colour Consultation, or ask our team about your floor.