Pre-Catalyzed Waterborne Wall Epoxy — Semi-Gloss

Related products

• 

  Alkyd Urethane EnV200amel – Gloss

  V200

  Show Details

  • Features
  • More Information
  • SDS / TDS

  V200 product is a heavy-duty alkyd enamel intended for use on a wide variety of surfaces, both interior and exterior. The surface-tolerant formula sticks to surfaces that may be marginally prepared, and the exceptional flow and levelling provides a smooth, uniform finish. Made with our toughest alkyd resin, this paint stands up to mechanical and human abuse, while the urethane fortification adds gloss and colour retention in exterior spaces exposed to sunlight and rain.

  • Urethane modification for maximum durability
  • Easy application
  • For use on all surfaces
  • Hard, scratch- and impact-resistant coating
  • High-solids formula

  Available Sheens: Gloss

  Available Colours: White, Bronzetone, Silver Gray, Battleship Gray, Aluminum, Black, Wrought Iron Black (Available in flat sheen only), Safety Yellow, Safety Red, Safety Blue, and Safety Green; Pastel Base, Tint Base, Deep Base, Clear Base, and Industrial Deep Base

  Colorant Used: Universal

  Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner

  Cleanup: Mineral Spirits

  Resin Type: Oil Modified Alkyd Urethane

  Recommended Use: Interior or exterior

  MPI Rating: 1 (V200-78 Aluminum only), 9, 27, 48

  VOC Level: 335 g/L

  SAFETY DATA SHEETS

  • SDS V200-01 (English)
  • SDS V200-10 (English)
  • SDS V200-20 (English)
  • SDS V200-30 (English)
  • SDS V200-40 (English)
  • SDS V200-62 (English)
  • SDS V200-70 (English)
  • SDS V200-75 (English)
  • SDS V200-78 (English)
  • SDS V200-80 (English)
  • SDS V200-81 (English)
  • SDS V200-85 (English)
  • SDS V200-86 (English)
  • DS V200-87 (English)
  • SDS V200-88 (English)
  • SDS V200-89 (English)

  TECHNICAL DATA SHEETS

  • TDS V200.78 (English)
  • TDS V200 (English)
  • Product Guide Specifications

  Hide Details
  Read more
• 

  Quick Dry Alkyd Enamel

  V230

  Show Details

  • Features
  • More Information
  • SDS / TDS

  Quick Dry Alkyd Enamel is a high-performance, single-component, quick-dry, rust preventive enamel formulated for use on ferrous metal substrates. It provides corrosion resistance for both interior and exterior steel surfaces. Not recommended for non-ferrous metals such as galvanized, aluminum unless properly primed, Quick Dry Alkyd Enamel may be applied to new or properly prepared, rusted surfaces.

  • Fast 15 minute dry
  • No orange peel
  • Airless or HVLP systems
  • Hard scratch-and impact-resistant coating
  • For all ferrous metal surfaces
  • Compliant for field application in OTC VOC region

  Available Sheens: Gloss

  Available Colours: White, Light Gray, Battleship Gray, Black, Safety Yellow, Safety Red, and Safety Orange; Tintable White, Deep Base, and Clear Base

  Colorant Used: Industrial

  Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner

  Cleanup: Mineral Spirits or High Flash Naphtha

  Resin Type: Short Oil Vinyl Toluene Alkyd

  Recommended Use: Interior or exterior

  MPI Rating: 96

  VOC Level: 395 g/L

  SAFETY DATA SHEETS

  • SDS V230-01 (English)

  TECHNICAL DATA SHEETS

  • TDS V230 (English)

  Hide Details
  Read more
• 

  Silicone Alkyd High Heat

  V264

  Show Details

  • Features
  • More Information
  • SDS / TDS

  Silicone Alkyd High Heat is designed to protect steel that is exposed to heat ranges up to 425 °C (800 °F). This product exhibits excellent weathering, resists mild industrial chemicals and moisture and is specific to industrial use.

  • Aluminum colour
  • High-heat resistance allows for use on industrial machinery, hot metal ducting and exhaust vents
  • Fast dry; quick return to service
  • Uses include heat stacks, boiler jackets, heat exchangers, drying kilns, and incinerators
  • Not for interior residential use

  Available Sheens: N/A

  Available Colours: Aluminum

  Colorant Used: N/A

  Colour System Supported: N/A

  Cleanup: Xylene

  Resin Type: Silicone Alkyd

  Recommended Use: Interior or exterior

  MPI Rating: 2

  VOC Level: 442 g/L

  SAFETY DATA SHEETS

  • SDS V264-78 (English)

  TECHNICAL DATA SHEETS

  • TDS V264 (English)
  • Product Guide Specifications

  Hide Details
  Read more
• 

  Acrylic DTM Enamel – Gloss

  V330

  Show Details

  • Features
  • More Information
  • SDS / TDS

  Acrylic DTM Enamel delivers superior resistance to moisture. This waterborne, all-acrylic finish can be applied direct-to-metal or over primer. The glossy surface is UV resistant, and special inhibitors in the formula prevent flash rusting when the finish is applied to ferrous metal.

  • For light-to-moderate industrial exposures
  • For metal, wood and masonry substrates
  • Flash rust resistant and corrosion protection on ferrous metals
  • Excellent for all corrugated metal sheeting
  • Meets Performance Requirements of TT-P-1511

  Available Sheens: Gloss
  Available Colours: White, Bronzetone, Black, Safety Yellow, Safety Red; Pastel Base, Tint Base, Deep Base, and Clear Base
  Cleanup: Soap and water
  Resin Type: Waterborne Acrylic
  Recommended Use: Interior
  MPI Rating: 154 and 164
  VOC Level: < 200 g/L

  Contact your authorized Corotech Dealer for product availability, including sizes, colours, and sheens.

  SAFETY DATA SHEETS

  • SDS V330-01 (English)
  • SDS V330-10 (English)
  • SDS V330-20 (English)
  • SDS V330-62 (English)
  • SDS V330-66 (English)
  • SDS V330-80 (English)
  • SDS V330-85 (English)
  • SDS V330-86 (English)
  • SDS V330-87 (English)
  • SDS V330-88 (English)

  TECHNICAL DATA SHEETS

  • TDS V330 (English)
  • Product Guide Specifications

  Hide Details
  Read more