Available Sheens: Semi-Gloss
Available Colours: White; Pastel Base, Tint Base, Deep Base, and Clear Base
Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Soap and water
Resin Type: Waterborne Acrylic
Recommended Use: Interior
MPI Rating: 153
VOC Level: 204 g/L
Alkyd Urethane EnV200amel – Gloss
Related products
-
Acrylic DTM Enamel — Semi-Gloss
V331
Show DetailsAcrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates. A special inhibitor in the formula prevents flash rust when applied to ferrous metal, and the smooth dry film is UV and moisture resistant.
- For light-to-moderate industrial, commercial and select residential use
- Excellent for metal, as well as wood, masonry, drywall and other surfaces
- Resists flash rust on metal
- Excellent for all corrugated metal sheeting
- Can be used on galvanized and aluminum metal
-
Shop Primer
V142
Show DetailsShop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
- Economical protective coat
- Accepts a wide variety of topcoats
- Dry to the touch in 30 minutes
-
Waterborne Urethane
V540
Show DetailsThis coating produces an extremely durable, chemical-resistant surface with the benefits of low odour and soap and water clean-up. Provides outstanding gloss retention and resists scratches and abrasion.
- Outstanding UV protection
- Low VOC
- Quick return to service time for minimum down time
- Excellent for floor applications
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
- Meets performance specs of MIL-C-85285
-
Clear Acrylic Sealer
V027
Show DetailsClear Acrylic Sealer is a waterborne, fast drying, clear acrylic coating formulated as an easy-to-apply seal coat on bare concrete floors and other masonry surfaces. This product is designed to allow for easy sweep up of dust and to reduce water penetration or erosion, efflorescence, spalling, and chalking without changing the natural appearance of the substrate. Areas exposed to heavy-duty industrial traffic or severe exterior conditions may require multiple coats.
- Rapid dry
- Soap and water clean-up
- Can be used over a variety of substrates
- Blister and alkali fume resistant
- Low odour
Reviews
There are no reviews yet.