Available Sheens: N/A
Available Colours: Clear (Appears grey when mixed with aggregate)
Colorant Used: N/A
Colour System Supported: N/A
Cleanup: Xylene or Epoxy Thinner
Resin Type: 2-Component Modified Amine Epoxy
Recommended Use: Interior or exterior
MPI Rating: N/A
VOC Level:3 0 g/L
Aliphatic Acrylic Urethane — Semi-Gloss
Related products
-
Epoxy Patch Kit
V165
Show DetailsEpoxy Patch Kit is a 100% solids epoxy co-polymer matrix for repairing and patching interior concrete floors. It sets rapidly with extremely high initial strength and is ready for foot traffic in 5-8 hours. This easy-to-use 3-part system includes liquid part A, liquid catalyst and aggregate.
- 3-part system allows on-site mixing to the exact consistency needed
- High Solids with no shrinkage
- For any high-traffic floor
- Non Flammable with no odour
- Trowels easily
-
Acrylic DTM Enamel — Semi-Gloss
V331
Show DetailsAcrylic DTM Enamel is a tough waterborne acrylic enamel that fights rust on metal and provides a smooth, durable finish on wood, drywall and masonry substrates. A special inhibitor in the formula prevents flash rust when applied to ferrous metal, and the smooth dry film is UV and moisture resistant.
- For light-to-moderate industrial, commercial and select residential use
- Excellent for metal, as well as wood, masonry, drywall and other surfaces
- Resists flash rust on metal
- Excellent for all corrugated metal sheeting
- Can be used on galvanized and aluminum metal
-
Waterborne Amine Epoxy
V440
Show DetailsWaterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This waterborne product has lower odour than solvent based epoxies, is easy to apply, and thus can be applied in occupied areas. Additionally, this product can be applied to many existing generic coating types with less risk of lifting or wrinkling.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
- Water cleanup, low odour, fast dry
- Easy application with excellent adhesion
- Very good resistance to water and chemicals
- Excellent for use on basement floors
- Meets qualifications for LEED when used over metal substrates
- Suitable for use in USDA inspected facilities
-
Acrylic Metal Primer
V110
Show DetailsAcrylic Metal Primer is a water-reducible, rust-inhibitive primer for steel, iron, and non-ferrous metal. It provides excellent adhesion to a range of hard-to-coat surfaces and can even be applied over tightly adhering rust. Designed for light-to-moderate industrial exposures, this product can be top coated with a wide variety of coatings.
- High solids content
- Low odour; suitable for occupied areas
- Can be recoated in just 4 hours
- Suitable for use in USDA-inspected facilities
- Qualifies for LEED certification
Reviews
There are no reviews yet.