Accueil » Accessoires pour pulvérisateur sans air

Accessoires pour pulvérisateur sans air

Shop airless sprayer accessories from Graco, Titan and TriTech: spray guns, tips, tip guards, hoses, extension tools, filters and kits. Pick by what you need below. For repair parts, pump packings and storage fluids, see Sprayer Maintenance Accessories.

Which airless accessory is right for you?

Your project/need Best choice Why
A new or spare spray gun Contractor PC gun with RAC X LP 517 SwitchTip or all airless guns Graco lists 3,600 psi and a trigger that adjusts to 2, 3 or 4 fingers
A tip for walls and general painting RAC X LP SwitchTip Graco's low-pressure RAC X tips, in several sizes
A fine finish on cabinets, doors and furniture RAC X FFLP tip or Titan Fine Finish tips Smaller orifices that suit thinner coatings
Comparing tips by brand All airless tips, including TriTech T93R Check the paint label for the tip size, then check the largest tip your sprayer accepts
A tip guard or worn seals RAC X HandTite guard and OneSeal tip seals A tip needs a guard to spray, and seals stop leaks at the tip
A longer or replacement hose BlueMax II Airless Hose or Xtreme-Duty 4500 psi hose Match the hose's pressure rating and fittings to your sprayer, or browse all hoses
Ceilings, high walls and hard-to-reach spots RAC X Tip Extension or 3 ft Pole Gun Spray without a ladder. See all extended reach tools
Spitting, clogs or debris in the paint Easy Out Gun Filter or other filters and strainers Filters catch debris before it reaches the tip. Gun, pump and inlet filters differ, so match your model
A gun and hose in one purchase Contractor Gun, Hose Kit 288489 or all kits Matched parts for adding to or replacing a setup

Tip number: the first digit doubled is the fan width in inches at about 12 in from the surface. The last two digits are the orifice in thousandths of an inch. A 310 gives a 6 to 8 in fan with a 0.010 in orifice.

Not sure which gun, tip, hose or filter fits your sprayer? Contact us with your sprayer model and we'll help you choose.

91 produits

Airless Sprayer Accessories FAQ

1Which spray tip size should I buy?

Check the paint label first. The first digit of the tip number doubled is the fan width in inches at about 12 in. The last two digits are the orifice in thousandths of an inch. Thicker coatings need a larger orifice, and thin stains and lacquers suit a smaller one. Your sprayer also has a maximum tip size, so check that.

2What does a fine finish tip do?

It has a smaller orifice, which suits thinner coatings on cabinets, doors and furniture. It passes less paint than a general-purpose tip, so it takes longer on big surfaces. See the Graco FFLP tip or Titan Fine Finish tips.

3Will a Graco tip or gun fit a Titan or TriTech sprayer?

Compatibility depends on the inlet thread, the pressure rating and the tip and guard style. We only list a fit when the manufacturer or the product page states it. Check your sprayer model, or contact us before you order.

4How do I choose an airless hose?

Match the hose's thread size and pressure rating to your sprayer and gun. Compare the length and working pressure on the product page, such as the BlueMax II. A longer hose lets you move less often, but check the maximum length your sprayer allows.

5Which filter should I use, and how often should I change it?

Gun filters, pump manifold filters and inlet strainers are different parts, so match the filter to your model. Clean or replace it when the spray spits or the flow drops. Thicker coatings usually need a coarser filter, so check your sprayer's manual.

6How do I spray ceilings and high walls without a ladder?

Use an extension. The RAC X Tip Extension moves the tip further from the gun, and a pole gun lets you reach from the floor. See all extended reach tools.

7Where are the repair kits and pump parts?

In Sprayer Maintenance Accessories, which has gun repair kits, pump packings, storage fluids and other wear parts. Contact us with your sprayer model if you are not sure which one you need.