{"product_id":"old-masters-masters-armor-water-based-clear-finish","title":"Old Masters Masters Armor Interior Water-Based Clear Finish","description":"\u003ch2\u003eOld Masters Masters Armor, Interior Water-Based Clear Finish\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMasters Armor\u003c\/strong\u003e is Old Masters' \u003cstrong\u003ewater-based clear finish\u003c\/strong\u003e for interior wood. It flows and levels well, seals itself with no separate sanding sealer, and dries fast enough for three coats in a day. Use it on \u003cstrong\u003efloors, cabinets, furniture, table tops and bar tops\u003c\/strong\u003e. Choose \u003cstrong\u003eFlat, Satin, Semi-Gloss or Gloss\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-sealing:\u003c\/strong\u003e no sanding sealer needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast:\u003c\/strong\u003e dry to the touch in about 30 minutes, recoat in 1 to 2 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable\u003c\/strong\u003e enough for floors, tables and bar tops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoap-and-water clean-up\u003c\/strong\u003e and low odour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eInterior wood floors, cabinets, doors, trim, furniture, table tops and bar tops. It goes over bare wood or fully dried stain. \u003cem\u003eInterior use only. Do not apply in direct sun or in strong air movement.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSheens and Sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat:\u003c\/strong\u003e no shine, the most natural look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin:\u003c\/strong\u003e a soft low sheen, the most popular choice for floors and cabinets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-Gloss:\u003c\/strong\u003e more sheen and depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss:\u003c\/strong\u003e the highest shine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eClear, in 946 mL and 3.78 L.\u003c\/p\u003e\n\u003ch3\u003eWater-Based Armor or Oil-Based Poly?\u003c\/h3\u003e\n\u003cp\u003eMasters Armor stays clear and recoats in hours. \u003ca href=\"\/products\/old-masters-oil-based-polyurethane\"\u003eOld Masters Oil-Based Polyurethane\u003c\/a\u003e is oil-based and needs longer between coats. For outdoor wood, use \u003ca href=\"\/products\/old-masters-ascend-exterior-water-based-clear-finish\"\u003eOld Masters Ascend Exterior\u003c\/a\u003e or \u003ca href=\"\/products\/old-masters-spar-marine-varnish\"\u003eOld Masters Spar Marine Varnish\u003c\/a\u003e instead.\u003c\/p\u003e\n\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.78 L:\u003c\/strong\u003e about 300–400 sq ft per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e946 mL:\u003c\/strong\u003e about 75–100 sq ft per coat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInterior water-based clear finish, self-sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSheens\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat, Satin, Semi-Gloss, Gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoats\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (21 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch: about 30 minutes. Recoat: 1–2 hours. Light use: 24 hours. Full cure: about 1 week\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16–32 °C (60–90 °F) air and surface; 30–70% humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSynthetic brush, pad or roller suited to water-based finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarm, soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrep.\u003c\/strong\u003e Surfaces must be clean, dry and free of dirt, wax and grease. Sand bare wood with the grain and remove all dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet stain dry.\u003c\/strong\u003e Allow oil-based stain at least 48 hours before top coating. Don't sand uncoated stain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir, don't shake.\u003c\/strong\u003e Shaking adds bubbles. Test on a hidden spot first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply a thin, even coat\u003c\/strong\u003e with the grain, keeping a wet edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat after 1–2 hours.\u003c\/strong\u003e Sand lightly with 220-grit between coats and remove the dust. If the paper gums up, give it more time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply 3 coats.\u003c\/strong\u003e Wait 24 hours before light use and about a week for full cure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use Masters Armor on hardwood floors?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Old Masters makes it for floors, cabinets, furniture, table and bar tops. Apply three coats and wait 24 hours before light foot traffic. It reaches full cure in about a week, so hold off on rugs and furniture until then.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need a sanding sealer first?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. Masters Armor is self-sealing, so the first coat seals the wood and later coats build the finish.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIt looks milky in the can. Is that normal?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Masters Armor looks milky when wet and dries clear.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I put it over oil-based stain?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, once the stain is fully dry. Old Masters says to let oil-based stain dry at least 48 hours in good conditions before top coating. That covers \u003ca href=\"\/products\/old-masters-oil-based-gel-stain\"\u003eOld Masters Gel Stain\u003c\/a\u003e, \u003ca href=\"\/products\/old-masters-oil-based-wiping-stain\"\u003eOld Masters Wiping Stain\u003c\/a\u003e and \u003ca href=\"\/products\/old-masters-fast-dry-wood-stain\"\u003eOld Masters Fast Dry Wood Stain\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow many coats, and how long between them?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThree coats give the best durability. In good conditions it dries to the touch in about 30 minutes and is ready to recoat in 1 to 2 hours, so you can finish a project in a day.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eMasters Armor or oil-based polyurethane?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eMasters Armor dries fast, has low odour and cleans up with soap and water. \u003ca href=\"\/products\/old-masters-oil-based-polyurethane\"\u003eOld Masters Oil-Based Polyurethane\u003c\/a\u003e takes longer between coats and cleans up with mineral spirits, and it adds a warmer amber tone. Choose Armor when you want a clear look and a quick turnaround.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"Old Masters","offers":[{"title":"946ml \/ Flat","offer_id":67810022883383,"sku":"C72004","price":38.0,"currency_code":"USD","in_stock":true},{"title":"946ml \/ Satin","offer_id":67810022916151,"sku":"C72104","price":38.0,"currency_code":"USD","in_stock":true},{"title":"946ml \/ Semi-Gloss","offer_id":67810022948919,"sku":"C72204","price":38.0,"currency_code":"USD","in_stock":false},{"title":"946ml \/ Gloss","offer_id":67810022981687,"sku":"C72304","price":38.0,"currency_code":"USD","in_stock":true},{"title":"3.78L \/ Flat","offer_id":67810023014455,"sku":"C72001","price":117.0,"currency_code":"USD","in_stock":true},{"title":"3.78L \/ Satin","offer_id":67810023047223,"sku":"C72101","price":117.0,"currency_code":"USD","in_stock":true},{"title":"3.78L \/ Semi-Gloss","offer_id":67810023079991,"sku":"C72201","price":117.0,"currency_code":"USD","in_stock":true},{"title":"3.78L \/ Gloss","offer_id":67810023112759,"sku":"C72301","price":117.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/086348047211.jpg?v=1795208608","url":"https:\/\/thepaintpeople.com\/products\/old-masters-masters-armor-water-based-clear-finish","provider":"The Paint People","version":"1.0","type":"link"}