Available Sheens: Semi-Gloss
Available Colours: Tintable White, Deep Base and Clear Base
Colorant Used: Industrial
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Epoxy Thinner (V704)
Resin Type: Polyamide Epoxy
Recommended Use: Interior or exterior
MPI Rating: N/A
VOC Level: 184 g/L
Acrylic Metal Primer
Related products
-
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
-
Prep All Universal Metal Primer
V132
Show DetailsPrep All Universal Metal Primer is an economical, single-component primer engineered to provide corrosion protection on all ferrous metals. This quick-drying formula provides fast production times, and its alkyd resin formulation allows for application of a wide variety of intermediate and finish coat products. Formulated for air spraying, it can also be applied by airless and HVLP sprayers, brushes, or rollers.
- Fast 30 minute dry – recoat in 4 hours
- Tie coat over many existing coatings
- Corrosion protection on all ferrous metals
- Available in White, Red or Gray
-
Waterborne Acrylic Epoxy
V450
Show DetailsWaterborne Acrylic Epoxy is a two-component epoxy that offers unique features such as low odour and application over slightly damp surfaces. For use on properly prepared interior & exterior ferrous metal, galvanized metal, wood, plaster, masonry and drywall surfaces that are subject to moderate abrasion or mild chemical exposures. Not recommended as a heavy-duty floor finish.
-
Polyamide Epoxy Primer
V150
Show DetailsPolyamide Epoxy Primer is formulated for use on ferrous and non-ferrous metals in industrial and commercial applications. This two-component, rust-inhibitive epoxy primer is an excellent choice for use as a rust-inhibitive base coat when used as part of a high-performance coating system. With proper top coating, it demonstrates excellent resistance to moisture and chemicals, including solvents, acids, and alkalis. Polyamide Epoxy Primer is also suitable for use on concrete substrates in secondary containment and immersion service applications.
- High-solids content
- Outstanding protection against corrosion
- Engineered for use in general metal finishing and fabrication
- Also appropriate for chemical processing facilities and transportation infrastructure finishing
- Suitable as a high-performance tie coat; especially over existing epoxies
- Suitable for use in USDA-inspected facilities
Reviews
There are no reviews yet.