Available Sheens: Gloss
Available Colours: Clear, White, Terracotta, Sandstone, Silver Gray, and Battleship Gray; Pastel Base, Tint Base, Deep Base, and Clear Base
Colorant Used: Universal
Colour System Supported: Benjamin Moore COLORx® and X-Rite ColorDesigner
Cleanup: Soap and Water
Resin Type: 2-Component Amine Adduct Epoxy
Recommended Use: Interior
MPI Rating: N/A
VOC Level: 206 g/L
100% Solids Epoxy Pre-Primer
Related products
-
Waterborne Amine Epoxy
V440
Show DetailsWaterborne Amine Epoxy is formulated to provide good chemical, abrasion and impact resistance on a variety of commercial and industrial surfaces, including steel, iron, concrete, non-ferrous metals, wood and drywall. Particularly suited for use on concrete floors. This waterborne product has lower odour than solvent based epoxies, is easy to apply, and thus can be applied in occupied areas. Additionally, this product can be applied to many existing generic coating types with less risk of lifting or wrinkling.
When used on floors, this product provides moderate- to heavy-duty protection in commercial environments exposed to frequent foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild chemicals, occasional steam cleaning, and powerwashing.
- Water cleanup, low odour, fast dry
- Easy application with excellent adhesion
- Very good resistance to water and chemicals
- Excellent for use on basement floors
- Meets qualifications for LEED when used over metal substrates
- Suitable for use in USDA inspected facilities
-
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
-
Aliphatic Acrylic Urethane — Semi-Gloss
V510
Show DetailsAliphatic Acrylic Urethane is a multi-use, two-component urethane appropriate for use on both metal and masonry. This product provides excellent gloss and colour retention when used on exterior surfaces exposed to sunlight and rain, and the highly cross-linked formula provides superior abrasion, chemical, and solvent resistance. Due to these outstanding features, urethanes are often used as the final layer in a multi-layer system on steel or masonry.
- Resistant to hydraulic fluid
- Outstanding UV protection
- High chemical and abrasion resistance
- Suitable for use in USDA inspected facilities
- Meets performance specs of MIL-C-85285
- Excellent anti-graffiti coating
-
Waterborne Bonding Primer
V175
Show DetailsWaterborne Bonding Primer is a one-component bonding primer that may also be used as a rust-inhibitive universal primer. This product bonds to various metals creating a solid foundation for finishing coats. This product may be finish coated with a wide variety of coatings including alkyds, acrylics, epoxies, urethanes and moisture cured urethanes. Because of its versatility on all metals, Waterborne Bonding Primer will replace traditional wash coat primers and offers an easier-to-use alternative for all projects.
- Replaces traditional wash coat primers with an easier-to-use coating
- Low VOC, soap and water clean-up
- Bonds to all metal substrates including tough to coat chrome, brass, stainless and aluminum
- Suitable for use in USDA inspected facilities
- Qualifies for LEEDS credits
Reviews
There are no reviews yet.