Available Sheens: Primer
Available Colours: Red and Gray
Colorant Used: N/A
Colour System Supported: N/A
Cleanup: Mineral Spirits or High Flash Naphtha
Resin Type: Alkyd
Recommended Use: Interior or exterior
MPI Rating: N/A
VOC Level: 337 g/L
Acrylic DTM Enamel – Gloss
Related products
-
Shop Primer
V142
Show DetailsShop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
- Economical protective coat
- Accepts a wide variety of topcoats
- Dry to the touch in 30 minutes
-
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
-
Organic Zinc Rich Primer
Show DetailsShop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
- Economical protective coat
- Accepts a wide variety of topcoats
- Dry to the touch in 30 minutes
-
Fast Dry Polyamide Epoxy Coating
V410
Show DetailsFast Dry Polyamide Epoxy is a unique satin sheen epoxy that cures fully in
24 hours at 25 °C (77 °F). In addition, this product cures in temperatures as low as 0 °C (32 °F) in approximately 5 days. Fast Dry Polyamide Epoxy may be used as a high durability floor finish that can be put into service 24 hours after coating application when applied at 25 °C (77 °F).- Fast cure and low temp applications
- Excellent for all metal and masonry surfaces
- Excellent acid and chemical resistance
- Hard, scratch and impact resistant coating
- Suitable for use in USDA inspected facilities
Reviews
There are no reviews yet.