Available Sheens: Primer
Available Colours: White and Red
Colorant Used: Can be tinted with 60 ml of Universal colorant
Colour System Supported: N/A
Cleanup: Soap and water
Resin Type: Waterborne Acrylic
Recommended Use: Interior/Exterior
MPI Rating: N/A
VOC Level: 199 g/L
Rapid Dry Alkyd Enamel
Related products
-
Acrylic Metal Primer
V110
Show DetailsAcrylic Metal Primer is a water-reducible, rust-inhibitive primer for steel, iron, and non-ferrous metal. It provides excellent adhesion to a range of hard-to-coat surfaces and can even be applied over tightly adhering rust. Designed for light-to-moderate industrial exposures, this product can be top coated with a wide variety of coatings.
- High solids content
- Low odour; suitable for occupied areas
- Can be recoated in just 4 hours
- Suitable for use in USDA-inspected facilities
- Qualifies for LEED certification
-
Polyamide Epoxy Coating
V400
Show DetailsPolyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.
- Highly cross-linked film for toughness and durability
- Resists many chemicals and solvents
- Medium build epoxy
- Suitable for immersion
- Suitable for use in USDA inspected facilities
-
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
-
Acrylic DTM Enamel – Gloss
V330
Show DetailsAcrylic DTM Enamel delivers superior resistance to moisture. This waterborne, all-acrylic finish can be applied direct-to-metal or over primer. The glossy surface is UV resistant, and special inhibitors in the formula prevent flash rusting when the finish is applied to ferrous metal.
- For light-to-moderate industrial exposures
- For metal, wood and masonry substrates
- Flash rust resistant and corrosion protection on ferrous metals
- Excellent for all corrugated metal sheeting
- Meets Performance Requirements of TT-P-1511
Reviews
There are no reviews yet.