Aliphatic Acrylic Urethane - Gloss

Aliphatic Acrylic Urethane – Gloss

Categories: , ,

Reviews

There are no reviews yet.

Be the first to review “Aliphatic Acrylic Urethane – Gloss”

Your email address will not be published. Required fields are marked *

Related products

  • Epoxy Mastic Coating

    Epoxy Mastic Coating

    V160

    Show Details

    Epoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.

    • High solids (79%) and high build – excellent for corners, crevices and welds
    • Surface-tolerant mastic for marginal substrates
    • Hard scratch- and impact-resistant coating
    • Excellent for secondary containment
    • Qualifies for LEED credits
    • Suitable for use in USDA inspected facilities
    Hide Details
  • Polyamide Epoxy Primer

    Polyamide Epoxy Primer

    V150

    Show Details

    Polyamide Epoxy Primer is formulated for use on ferrous and non-ferrous metals in industrial and commercial applications. This two-component, rust-inhibitive epoxy primer is an excellent choice for use as a rust-inhibitive base coat when used as part of a high-performance coating system. With proper top coating, it demonstrates excellent resistance to moisture and chemicals, including solvents, acids, and alkalis. Polyamide Epoxy Primer is also suitable for use on concrete substrates in secondary containment and immersion service applications.

    • High-solids content
    • Outstanding protection against corrosion
    • Engineered for use in general metal finishing and fabrication
    • Also appropriate for chemical processing facilities and transportation infrastructure finishing
    • Suitable as a high-performance tie coat; especially over existing epoxies
    • Suitable for use in USDA-inspected facilities
    Hide Details
  • Clear Acrylic Sealer

    Clear Acrylic Sealer

    V027

    Show Details

    Clear Acrylic Sealer is a waterborne, fast drying, clear acrylic coating formulated as an easy-to-apply seal coat on bare concrete floors and other masonry surfaces. This product is designed to allow for easy sweep up of dust and to reduce water penetration or erosion, efflorescence, spalling, and chalking without changing the natural appearance of the substrate. Areas exposed to heavy-duty industrial traffic or severe exterior conditions may require multiple coats.

    • Rapid dry
    • Soap and water clean-up
    • Can be used over a variety of substrates
    • Blister and alkali fume resistant
    • Low odour
    Hide Details
  • Moisture Tolerant Quick Set Epoxy Sealer

    Moisture Tolerant Quick Set Epoxy Sealer

    V156

    Show Details

    Organic Zinc Rich Primer is a heavy-duty corrosion inhibitor for interior or exterior ferrous metal and weathered galvanized metal. It is made from an organic thermoplastic resin and leaves a finished film that is 83% zinc. Ideal for touching up existing galvanized metal with no topcoat.

    • High zinc content delivers cathodic protection
    • Can be top coated or left uncoated
    • Thermoplastic resin requires tie coat under certain finishes; check TDS
    • Cold Galvanizing Project Qualification
    • Meets Composition Requirements of TT-P-1046
    • Meets Performance Requirements of TT-P-641 & DOD-P-21035
    • Meets Performance Requirements of Mil-P-26915 Type I, Class A
    • Meets SSPC Paint #5 & SSPC Paint #20, Type II
    Hide Details