Available Sheens: Medium Gloss
Available Colours: Clear
Colorant Used: N/A
Colour System Supported: N/A
Cleanup: Epoxy Thinner
Resin Type: 2-Component Epoxy
Recommended Use: Interior or exterior
MPI Rating: N/A
VOC Level: 6 g/L
Waterborne Amine Epoxy
Related products
-
100% Solids Epoxy Pre-Primer
V155
Show Details100% Solids Epoxy Pre-Primer is formulated for use on both steel and masonry. For rusted steel where extensive surface preparation is needed, but not logistically possible, the penetrating properties and extended dry time – 16 hours at 25 °C (77 °F) – of this two-component epoxy seal crevices and other imperfections, promoting better adhesion for subsequent coats. For prepared masonry surfaces, V155 penetrates and seals, providing an excellent foundation for subsequent coats of Corotech epoxy floor coatings. The unique, 100% solids formula of V155 forms a sealed epoxy barrier that inhibits future corrosion.
- Low viscosity easily fills voids and crevices
- Does not shrink – eliminates craters
- Chemical and fume resistant
- Extended cure time allows maximum penetration
- Seals previously coated concrete, masonry, and galvanized metal
- Qualifies for LEED certification
-
Pre-Catalyzed Waterborne Wall Epoxy — Eggshell
V342
Show DetailsThis unique product provides epoxy toughness in a ready-to-use waterborne formula for walls, ceilings and trim (not ideal for floors). Low odour, low VOC and water cleanup make this product ideal for use in occupied areas. The cured film is scrubbable, resists water and common cleaning chemicals, and stands up to abrasion and marring. Excellent adhesion to many surfaces, including existing paint, drywall, primed masonry and primed metal.
- Single pack – no catalyst
- Tints to all colours
- Qualifies for LEED
- Excellent for retail, commercial, healthcare, schools and more
- Low odour, low VOC and water cleanup
-
Shop Primer
V142
Show DetailsShop Primer is an economical steel primer for commercial use in mild to moderate exposures. This product is ideal as a temporary transport coat on fabricated pieces or as an economical barrier primer. It is a temporary coating. This primer may be top-coated with a wide variety of finishes. However, finishes containing strong solvents (Ketones, Xylene, Toluene) may cause wrinkling or lifting of Shop Primer.
- Economical protective coat
- Accepts a wide variety of topcoats
- Dry to the touch in 30 minutes
-
Waterborne Urethane
V540
Show DetailsThis coating produces an extremely durable, chemical-resistant surface with the benefits of low odour and soap and water clean-up. Provides outstanding gloss retention and resists scratches and abrasion.
- Outstanding UV protection
- Low VOC
- Quick return to service time for minimum down time
- Excellent for floor applications
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
- Meets performance specs of MIL-C-85285
Reviews
There are no reviews yet.