{"product_id":"3m-pps-2-0-adapter-s18","title":"3M PPS 2.0 Adapter Type S18 26054 for Bottom Feed Guns","description":"\u003cp\u003eThe \u003cstrong\u003e3M PPS 2.0 Adapter, Type S18 (26054)\u003c\/strong\u003e converts bottom-feed (pressure and siphon) spray guns to the 3M PPS Series 2.0 system. It's the adapter 3M lists for the \u003ca href=\"\/products\/fuji-spray-5070-t70-spray-gun\"\u003eFuji Spray T70\u003c\/a\u003e, the \u003ca href=\"\/products\/fuji-m-model-hvlp-turbine-spray-gun-bottom-feed\"\u003eFuji M-Model bottom feed\u003c\/a\u003e, Fuji XPC and XT guns, plus Binks Mach 1, DeVilbiss siphon models, CAPspray and Apollo guns. Pair it with a PPS 2.0 H\/O pressure cup and you get the clean, disposable lid-and-liner workflow on a bottom-feed gun: mix in the liner, spray, then throw the liner away instead of washing a quart cup. It's built for cabinet shops, furniture finishers and contractors who spray every day.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePPS 2.0 for bottom-feed guns.\u003c\/strong\u003e Designed for use with the PPS 2.0 H\/O pressure cups on pressure-feed and siphon guns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep your gun.\u003c\/strong\u003e Remove the existing cup and thread the S18 on. No new spray gun needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-point connection on a wide 360° platform.\u003c\/strong\u003e The PPS 2.0 lid connects at four points for a stable, reliable fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel.\u003c\/strong\u003e Resists solvents and holds up to daily cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide bowl design.\u003c\/strong\u003e Wipes clean fast between jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess solvent, faster clean-up.\u003c\/strong\u003e 3M reports up to 70% less cleaning solvent and up to 50% less prep and clean-up time than conventional cups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications \u0026amp; Recommended Uses\u003c\/h2\u003e\n\u003cp\u003eUse the S18 on bottom-feed guns with a 3\/8\"-18 NPS fluid inlet, including Fuji Spray turbine guns. It's a good fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCabinet, door and furniture finishing with lacquers, primers and waterborne enamels\u003c\/li\u003e\n\u003cli\u003eThicker coatings that benefit from a pressurized cup\u003c\/li\u003e\n\u003cli\u003eTrim and millwork in the shop or on site\u003c\/li\u003e\n\u003cli\u003eJobs with frequent colour changes, where a fresh liner means no cup to wash\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause the liner collapses as you spray, you can work at any angle, even upside down. On a Fuji turbine system, the turbine air pressurizes the H\/O cup.\u003c\/p\u003e\n\u003ch2\u003eWhat You Need\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis S18 adapter\u003c\/li\u003e\n\u003cli\u003eA PPS 2.0 H\/O pressure cup: the \u003ca href=\"\/products\/3m-pps-series-2-0-ho-pressure-cup-26121\"\u003e400 mL Midi (26121)\u003c\/a\u003e or the \u003ca href=\"\/products\/3m-pps-high-output-pressure-cup-2-0-series\"\u003e650\/850 mL Standard\/Large (26124)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePPS 2.0 lids and liners in the matching size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Install and Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemove the existing cup from your spray gun.\u003c\/li\u003e\n\u003cli\u003eThread the S18 adapter onto the gun's fluid inlet until snug.\u003c\/li\u003e\n\u003cli\u003eMix your coating in a PPS 2.0 liner and fit the lid.\u003c\/li\u003e\n\u003cli\u003eSet the lid and liner into the H\/O pressure cup and connect it to the adapter, following 3M's H\/O cup instructions.\u003c\/li\u003e\n\u003cli\u003eSpray. When you're done, cap the lid with a sealing plug to save leftover material, or throw away the lid and liner.\u003c\/li\u003e\n\u003cli\u003eClean the gun and adapter with a small amount of the right solvent or water for your coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhy Buy From The Paint People?\u003c\/h2\u003e\n\u003cp\u003eWe're a family-run Mississauga paint business that has served painters since 1997. We sell Fuji Spray turbine systems and the PPS 2.0 H\/O pressure cups, so you can set up a bottom-feed gun in one order. Not sure which adapter fits? Email \u003ca href=\"mailto:info@thepaintpeople.com\"\u003einfo@thepaintpeople.com\u003c\/a\u003e with your gun's make and model and we'll point you to the right one.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e3M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003e3M PPS Series 2.0 Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdapter type\u003c\/th\u003e\n\u003ctd\u003eS18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3M part number\u003c\/th\u003e\n\u003ctd\u003e26054\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3M ID\u003c\/th\u003e\n\u003ctd\u003e7100135926\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e00051131260542\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003e3\/8\"-18 NPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread type\u003c\/th\u003e\n\u003ctd\u003eFemale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed type\u003c\/th\u003e\n\u003ctd\u003eBottom feed (pressure or siphon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorks with\u003c\/th\u003e\n\u003ctd\u003ePPS 2.0 H\/O pressure cups (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eOriginal (legacy) PPS lids and cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003e1 adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eCompatible Spray Guns\u003c\/h5\u003e\n\u003cp\u003e3M lists the S18 (26054) for these guns. This is a partial list; check your gun's fluid inlet if your model isn't here.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuji Spray:\u003c\/strong\u003e T-70, M-Model, XPC, XT, XT-2, MPX-30 Siphon, LX-20 Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBinks:\u003c\/strong\u003e Mach 1, Mach 1SL, Mach 1 Featherlite, 95, 95 SL, Model 2001, Model 7, SV-100 Siphon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeVilbiss:\u003c\/strong\u003e FinishLine FLG4 siphon models, FLG-606, FLG-626, FLG-693, FLG-694, GTi Millennium 620S, Compact 506 siphon\/pressure, Compact 507, JGA-504, JGA-510, VTX, TGHV530\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAPspray \/ Titan:\u003c\/strong\u003e CS 3100, 5100, 8100, 9100, 9900, Maxum Elite II bottom feed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApollo:\u003c\/strong\u003e A5011, A5125, A5510, A5610, A7500\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOthers:\u003c\/strong\u003e Accuspray 10 \/ 12s \/ 19, Graco AirPro Siphon, Graco FinishPro HVLP Edge, Earlex HV5000, Wagner NBC, SATAjet H, Kobalt KC-599CS Siphon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpraying a Fuji gravity gun like the T75G? You need the \u003ca href=\"\/products\/3m-pps-2-0-series-type-s2-adapter\"\u003eS2c adapter\u003c\/a\u003e. For the Fuji G-XPC, choose the \u003ca href=\"\/products\/3m-pps-2-0-adapter-s24\"\u003eS24 adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eFAQs\u003c\/h5\u003e\n\u003ch3\u003eWill the S18 adapter fit my Fuji T70 or M-Model?\u003c\/h3\u003e\n\u003cp\u003eYes. 3M lists the S18 (26054) for the Fuji T-70, M-Model, XPC, XT and XT-2 bottom-feed guns.\u003c\/p\u003e\n\u003ch3\u003eDo I need a pressure cup with the S18?\u003c\/h3\u003e\n\u003cp\u003eYes. On a bottom-feed gun, the S18 is used with a PPS 2.0 H\/O pressure cup (26121 or 26124), sold separately.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with original PPS cups and lids?\u003c\/h3\u003e\n\u003cp\u003eNo. 3M designs Series 2.0 adapters for PPS Series 2.0 lids, liners and cups only. The older PPS H\/O pressure cup (16124) is not a Series 2.0 part.\u003c\/p\u003e\n\u003ch3\u003eWhich H\/O pressure cup should I get?\u003c\/h3\u003e\n\u003cp\u003eChoose by batch size. The 26121 holds the 400 mL Midi (and smaller) liners; the 26124 holds the 650 mL Standard and 850 mL Large liners.\u003c\/p\u003e\n\u003ch3\u003eWhat thread does the S18 have?\u003c\/h3\u003e\n\u003cp\u003eA 3\/8\"-18 NPS female thread, in stainless steel.\u003c\/p\u003e\n\u003ch3\u003eHow do I clean the adapter?\u003c\/h3\u003e\n\u003cp\u003eThe lid and liner are disposable, so only the gun and adapter need cleaning. Flush or wipe the adapter with a small amount of the right solvent or water.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":32435995246647,"sku":"MMM26054","price":52.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/3m-pps-2-0-adapter-s18-26054.webp?v=1793123400","url":"https:\/\/thepaintpeople.com\/products\/3m-pps-2-0-adapter-s18","provider":"The Paint People","version":"1.0","type":"link"}