{"product_id":"3m-pps-2-0-adapter-s15","title":"3M PPS 2.0 Adapter Type S15 26046, 3\/8\"-19 BSP Male","description":"\u003cp\u003eThe \u003cstrong\u003e3M PPS 2.0 Adapter, Type S15 (26046)\u003c\/strong\u003e converts DeVilbiss, Binks and other gravity spray guns with a 3\/8\"-19 BSP cup thread to the 3M PPS Series 2.0 disposable cup system. It's the adapter 3M lists for the DeVilbiss GTi Pro, Tekna, FinishLine FLG and CVi gravity guns, the Binks M1-G and the Earlex Sprayport Pro-8 Gravity, among many others. With the S15 on your gun, you mix, filter and spray from a disposable lid and liner, then toss them. That means faster colour changes, less solvent and no cup to scrub. It suits refinish shops, cabinet and furniture finishers, and contractors who spray every day.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep your gun.\u003c\/strong\u003e Take off the existing cup and thread the S15 in. No new spray gun needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-point connection on a wide 360° platform.\u003c\/strong\u003e The PPS 2.0 lid connects at four points, so a full cup stays steady through long passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel.\u003c\/strong\u003e Resists solvents and holds up to daily cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide bowl design.\u003c\/strong\u003e Wipes clean fast between jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits every PPS 2.0 cup size.\u003c\/strong\u003e Works with all PPS 2.0 cups and lids, from the 90 mL Micro to the 850 mL Large.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess solvent, faster clean-up.\u003c\/strong\u003e 3M reports up to 70% less cleaning solvent and up to 50% less prep and clean-up time than conventional cups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications \u0026amp; Recommended Uses\u003c\/h2\u003e\n\u003cp\u003eUse the S15 on gravity-feed guns with a 3\/8\"-19 BSP cup inlet, most often DeVilbiss and Binks. It's a good fit for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive basecoat, clearcoat and primer work\u003c\/li\u003e\n\u003cli\u003eCabinet, furniture and millwork finishing with lacquers and waterborne coatings\u003c\/li\u003e\n\u003cli\u003eIndustrial, equipment and marine coatings\u003c\/li\u003e\n\u003cli\u003eJobs with frequent colour changes, where a fresh liner means no cup to wash\u003c\/li\u003e\n\u003cli\u003eSmall batches you want to mix in the cup, spray, then seal and save\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePPS 2.0 is a closed system, so you can spray at any angle, even upside down.\u003c\/p\u003e\n\u003ch2\u003eHow to Install and Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemove the existing cup from your spray gun.\u003c\/li\u003e\n\u003cli\u003eThread the S15 adapter into the gun's cup inlet until snug.\u003c\/li\u003e\n\u003cli\u003eMix your coating in a PPS 2.0 liner inside the hard cup, using the mix ratios printed on the cup.\u003c\/li\u003e\n\u003cli\u003eLock the lid onto the cup with a quarter turn, then attach the cup to the adapter.\u003c\/li\u003e\n\u003cli\u003eSpray. When you're done, cap the lid with a sealing plug to save leftover material, or throw away the lid and liner.\u003c\/li\u003e\n\u003cli\u003eClean the gun and adapter with a small amount of the right solvent or water for your coating.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePPS 2.0 lids have a built-in 125 or 200 micron filter. Follow your coating maker's filter recommendation.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy From The Paint People?\u003c\/h2\u003e\n\u003cp\u003eWe're a family-run Mississauga paint business that has served painters since 1997. We stock \u003ca href=\"\/collections\/hvlp-cups-liners\"\u003e3M PPS 2.0 cups and liners\u003c\/a\u003e alongside the adapters, so you can set up your gun in one order. Not sure which adapter fits? Email \u003ca href=\"mailto:info@thepaintpeople.com\"\u003einfo@thepaintpeople.com\u003c\/a\u003e with your gun's make and model and we'll point you to the right one.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003e3M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct\u003c\/th\u003e\n\u003ctd\u003e3M PPS Series 2.0 Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdapter type\u003c\/th\u003e\n\u003ctd\u003eS15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3M part number\u003c\/th\u003e\n\u003ctd\u003e26046\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e3M ID\u003c\/th\u003e\n\u003ctd\u003e7100135334\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e00051131260467\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread\u003c\/th\u003e\n\u003ctd\u003e3\/8\"-19 BSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread type\u003c\/th\u003e\n\u003ctd\u003eMale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorks with\u003c\/th\u003e\n\u003ctd\u003eAll PPS 2.0 cup and lid sizes (90 to 850 mL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNot for\u003c\/th\u003e\n\u003ctd\u003eOriginal (legacy) PPS lids and cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSold as\u003c\/th\u003e\n\u003ctd\u003e1 adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003eCompatible Spray Guns\u003c\/h5\u003e\n\u003cp\u003e3M lists the S15 (26046) for these gravity guns. This is a partial list; check your gun's cup thread if your model isn't here.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeVilbiss GTi:\u003c\/strong\u003e GTi Pro (Base, Clear, Digital), GTi 600G, GTi 625G Waterborne, GTi Millennium 620G and 2000, GTiW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeVilbiss Tekna:\u003c\/strong\u003e Tekna, ProLite, Clearcoat, Copper, QuickClean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeVilbiss FinishLine:\u003c\/strong\u003e FLG4 gravity models, FLG-615, FLG-635, FLG-643, FLG-645, FLG-648, FLG-654, FLG-691, FLG-695\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeVilbiss other:\u003c\/strong\u003e CVi 522G \/ 620G \/ 620GW, DV1, dRd, EXL 620G, GFG-670 Plus, GFHV-510, JGA-535G, JGA-635G, PRi 601G Primer, Compact 506 gravity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBinks:\u003c\/strong\u003e M1-G, 95G, 630, BBR, MGI 1.8 Primer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOthers:\u003c\/strong\u003e Earlex Sprayport Pro-8 Gravity, Graco Delta GF, Sharpe Cobalt HVLP (Euro), Mac SG610K, Meiji F410, ANI F1-s HPS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSiphon or pressure-feed versions of these guns (for example the DeVilbiss FinishLine FLG4 siphon models or Compact 506 siphon) take the \u003ca href=\"\/products\/3m-pps-2-0-adapter-s18\"\u003eS18 adapter\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003ch5\u003eFAQs\u003c\/h5\u003e\n\u003ch3\u003eWhich DeVilbiss guns use the S15 adapter?\u003c\/h3\u003e\n\u003cp\u003eMost DeVilbiss gravity guns, including the GTi Pro, Tekna, FinishLine FLG and CVi lines. Check the compatible list above for your exact model.\u003c\/p\u003e\n\u003ch3\u003eMy DeVilbiss is a siphon or pressure-feed gun. Is the S15 right?\u003c\/h3\u003e\n\u003cp\u003eNo. 3M lists the S18 adapter for most DeVilbiss siphon and pressure-feed guns. The S15 is for gravity-feed models.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with original PPS cups and lids?\u003c\/h3\u003e\n\u003cp\u003eNo. 3M designs Series 2.0 adapters for PPS Series 2.0 lids, liners and cups only.\u003c\/p\u003e\n\u003ch3\u003eDoes it come with cups, lids or liners?\u003c\/h3\u003e\n\u003cp\u003eNo, this is the adapter only. Pair it with a PPS 2.0 lid and liner kit, such as the \u003ca href=\"\/products\/3m-pps-series-2-0-midi-spray-cup-kit-400ml-26112\"\u003eMidi 400 mL kit (26112)\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat thread does the S15 have?\u003c\/h3\u003e\n\u003cp\u003eA 3\/8\"-19 BSP male thread, in stainless steel.\u003c\/p\u003e\n\u003ch3\u003eHow do I clean the adapter?\u003c\/h3\u003e\n\u003cp\u003eThe lid and liner are disposable, so only the gun and adapter need cleaning. Flush or wipe the adapter with a small amount of the right solvent or water.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":32435991576631,"sku":"MMM26046","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/3m-pps-2-0-adapter-s15-26046.webp?v=1793122365","url":"https:\/\/thepaintpeople.com\/products\/3m-pps-2-0-adapter-s15","provider":"The Paint People","version":"1.0","type":"link"}