Available Sheens: Gloss
Available Colours: Clear, White, Terracotta, Sandstone, Silver Gray and Battleship Gray
Colorant Used: Ready Mixed Colours Only
Colour System Supported: Ready Mixed Colours Only
Cleanup: Xylene
Resin Type: 2-Component Cycloaliphatic Amine Epoxy
Recommended Use: Interior
MPI Rating: N/A
VOC Level: 13 g/L
-
Read more
100% Solids Epoxy Floor Coating
V430
Show DetailsHeavy-duty protection from a 100% solids epoxy for demanding industrial/commercial environments exposed to heavy vehicular and pedestrian traffic, constant moisture, intermittent strong chemical spills, and frequent cleaning with chemicals, steam and power washers.
- Self-levelling, high-build 100% solids formula
- Very low VOC
- Tenacious adhesion to concrete
- Outstanding durability
- Smooth gloss finish
- Meets qualifications for LEED as a floor coating
- Suitable for use in USDA inspected facilities
-
Read more
Epoxy Mastic Coating
V160
Show DetailsEpoxy Mastic Coating is a high-solids, rust-inhibitive, surface-tolerant epoxy mastic for professional use in industrial and commercial applications. Ideal for protection of steel and concrete (floor rated). Excellent for use on ferrous and non-ferrous metals, and when properly top-coated, exhibits excellent chemical and moisture resistance. Resists solvents, dilute acids and alkali attack.
- High solids (79%) and high build – excellent for corners, crevices and welds
- Surface-tolerant mastic for marginal substrates
- Hard scratch- and impact-resistant coating
- Excellent for secondary containment
- Qualifies for LEED credits
- Suitable for use in USDA inspected facilities
-
Read more
Fast Dry Polyamide Epoxy Coating
V410
Show DetailsFast Dry Polyamide Epoxy is a unique satin sheen epoxy that cures fully in
24 hours at 25 °C (77 °F). In addition, this product cures in temperatures as low as 0 °C (32 °F) in approximately 5 days. Fast Dry Polyamide Epoxy may be used as a high durability floor finish that can be put into service 24 hours after coating application when applied at 25 °C (77 °F).- Fast cure and low temp applications
- Excellent for all metal and masonry surfaces
- Excellent acid and chemical resistance
- Hard, scratch and impact resistant coating
- Suitable for use in USDA inspected facilities
-
Read more
Polyamide Epoxy Coating
V400
Show DetailsPolyamide Epoxy Coating is a multi-use epoxy designed for tanks, machinery, floors, structural members, walls, boats, and other industrial and commercial substrates requiring a durable coating in severe environments. Floors: moderate- to heavy-duty performance in commercial/industrial environments exposed to heavy foot traffic and occasional traffic of lightweight rubber-tired vehicles, intermittent spillage of mild to heavier chemicals, occasional steam and chemical cleaning. Metal: excellent for use on ferrous metals, non-ferrous metals and galvanized metal.
- Highly cross-linked film for toughness and durability
- Resists many chemicals and solvents
- Medium build epoxy
- Suitable for immersion
- Suitable for use in USDA inspected facilities