{"product_id":"titan-fine-finish-tips","title":"Pointe de pulvérisation de peinture sans air Titan Fine Finish","description":"\u003ch2\u003eTitan SC-6+ Fine Finish Airless Spray Tips\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTitan SC-6+ Fine Finish tips\u003c\/strong\u003e are reversible airless tips for cabinets, doors, trim, furniture and metal. They are rated to \u003cstrong\u003e5,000 psi\u003c\/strong\u003e, and Titan says they atomize up to 27% finer than a standard tip. Use them for stains, lacquers and light-bodied clear finishes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversible,\u003c\/strong\u003e so you can clear a clog by turning the tip around.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5,000 psi\u003c\/strong\u003e pressure rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixteen sizes\u003c\/strong\u003e from a 4-6 in fan to a 12-14 in fan, with orifices from 0.008 to 0.014 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip and guard combos\u003c\/strong\u003e in four sizes (a \"G\" at the end of the part number).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSizes and What They're For\u003c\/h3\u003e\n\u003cp\u003eSold as 671- followed by the size, such as 671-310. The \u003cstrong\u003efirst digit times 2\u003c\/strong\u003e is the fan width in inches when you spray about 12 in from the surface. The \u003cstrong\u003elast two digits\u003c\/strong\u003e are the orifice in thousandths of an inch. So a 310 gives a 6-8 in fan with a 0.010 in orifice. Thinner coatings suit smaller orifices. Check the coating maker's advice.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eFan\u003c\/th\u003e\n\u003cth\u003eOrifice\u003c\/th\u003e\n\u003cth\u003eTypical use\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e208\u003c\/td\u003e\n\u003ctd\u003e4-6 in\u003c\/td\u003e\n\u003ctd\u003e0.008 in\u003c\/td\u003e\n\u003ctd\u003eThin stains, sealers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e210\u003c\/td\u003e\n\u003ctd\u003e4-6 in\u003c\/td\u003e\n\u003ctd\u003e0.010 in\u003c\/td\u003e\n\u003ctd\u003eLacquers, stains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e212\u003c\/td\u003e\n\u003ctd\u003e4-6 in\u003c\/td\u003e\n\u003ctd\u003e0.012 in\u003c\/td\u003e\n\u003ctd\u003eEnamels, small parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e214\u003c\/td\u003e\n\u003ctd\u003e4-6 in\u003c\/td\u003e\n\u003ctd\u003e0.014 in\u003c\/td\u003e\n\u003ctd\u003eThicker coatings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e308\u003c\/td\u003e\n\u003ctd\u003e6-8 in\u003c\/td\u003e\n\u003ctd\u003e0.008 in\u003c\/td\u003e\n\u003ctd\u003eThin stains and sealers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e310\u003c\/td\u003e\n\u003ctd\u003e6-8 in\u003c\/td\u003e\n\u003ctd\u003e0.010 in\u003c\/td\u003e\n\u003ctd\u003eLacquers, stains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003ctd\u003e6-8 in\u003c\/td\u003e\n\u003ctd\u003e0.012 in\u003c\/td\u003e\n\u003ctd\u003eEnamels, trim\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e314\u003c\/td\u003e\n\u003ctd\u003e6-8 in\u003c\/td\u003e\n\u003ctd\u003e0.014 in\u003c\/td\u003e\n\u003ctd\u003eLatex trim and doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e408\u003c\/td\u003e\n\u003ctd\u003e8-10 in\u003c\/td\u003e\n\u003ctd\u003e0.008 in\u003c\/td\u003e\n\u003ctd\u003eThin stains, sealers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003ctd\u003e8-10 in\u003c\/td\u003e\n\u003ctd\u003e0.010 in\u003c\/td\u003e\n\u003ctd\u003eLacquers, stains\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e412\u003c\/td\u003e\n\u003ctd\u003e8-10 in\u003c\/td\u003e\n\u003ctd\u003e0.012 in\u003c\/td\u003e\n\u003ctd\u003eEnamels, doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e414\u003c\/td\u003e\n\u003ctd\u003e8-10 in\u003c\/td\u003e\n\u003ctd\u003e0.014 in\u003c\/td\u003e\n\u003ctd\u003eLatex trim, doors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e510\u003c\/td\u003e\n\u003ctd\u003e10-12 in\u003c\/td\u003e\n\u003ctd\u003e0.010 in\u003c\/td\u003e\n\u003ctd\u003eLacquers, wide panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e512\u003c\/td\u003e\n\u003ctd\u003e10-12 in\u003c\/td\u003e\n\u003ctd\u003e0.012 in\u003c\/td\u003e\n\u003ctd\u003eEnamels, wide panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e514\u003c\/td\u003e\n\u003ctd\u003e10-12 in\u003c\/td\u003e\n\u003ctd\u003e0.014 in\u003c\/td\u003e\n\u003ctd\u003eLatex doors, panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e612\u003c\/td\u003e\n\u003ctd\u003e12-14 in\u003c\/td\u003e\n\u003ctd\u003e0.012 in\u003c\/td\u003e\n\u003ctd\u003eEnamels, large flats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhich Guard Do I Need?\u003c\/h3\u003e\n\u003cp\u003eA tip needs a guard to spray. Titan says these tips fit most industry-standard safety guards. The 210G, 310G, 312G and 408G are sold with a guard. Every other size is the tip only, so use the guard on your gun. Not sure it matches your sprayer? \u003ca href=\"\/fr\/pages\/contact-page\"\u003eContact us\u003c\/a\u003e. Need a sprayer? See the \u003ca href=\"\/fr\/products\/titan-impact-x-440-airless-paint-sprayer-2429069\"\u003eTitan Impact X 440\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch5\u003eHow to Use\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelieve pressure\u003c\/strong\u003e and turn the sprayer off before changing a tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the tip\u003c\/strong\u003e in the guard with its seal, as the guard's manual shows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest on cardboard\u003c\/strong\u003e and raise the pressure only until the edges of the fan are even.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray\u003c\/strong\u003e about 12 in from the surface, overlapping each pass by half.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIf it clogs,\u003c\/strong\u003e relieve pressure and reverse the tip.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhich size is best for cabinets?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eA 310 for lacquers and stains, or a 312 for enamels. Use 210 for narrow face frames.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhich size for trim and doors?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eA 312 or 412 for enamels, and a 414 or 514 for latex. Match the orifice to the coating maker's advice.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat does the size number mean?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThe first digit times 2 is the fan width in inches at about 12 in. The last two digits are the orifice in thousandths of an inch.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWill it fit my Graco gun?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eTitan says the tips fit most industry-standard guards. Check that your guard takes a standard reversible tip, or contact us with your model.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhen should I replace a tip?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWhen the fan turns streaky or uneven after cleaning, or the spray looks wider and thinner than before.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I clean it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eRelieve pressure, remove the tip, and flush with the cleaner your coating needs. Clear dried coating with a soft brush, never a metal pick.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eFine finish tip vs a standard tip?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eTitan says the SC-6+ atomizes up to 27% finer than a standard tip. That gives a smoother finish on cabinets and furniture, but it passes less coating than a larger tip.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n","brand":"Titan","offers":[{"title":"671-208","offer_id":32470879567927,"sku":"671-208","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-210","offer_id":39492496064567,"sku":"671-210","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-210G","offer_id":41141116567607,"sku":"671-210G","price":47.99,"currency_code":"CAD","in_stock":true},{"title":"671-212","offer_id":39492496425015,"sku":"671-212","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-214","offer_id":39492496588855,"sku":"671-214","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-308","offer_id":39440787734583,"sku":"671-308","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-310","offer_id":39492496752695,"sku":"671-310","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-310G","offer_id":41141116633143,"sku":"671-310G","price":47.99,"currency_code":"CAD","in_stock":false},{"title":"671-312","offer_id":39492496883767,"sku":"671-312","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-312G","offer_id":41141116764215,"sku":"671-312G","price":47.99,"currency_code":"CAD","in_stock":true},{"title":"671-314","offer_id":39492497834039,"sku":"671-314","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-408","offer_id":39492498227255,"sku":"671-408","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-408G","offer_id":41141116829751,"sku":"671-408G","price":47.99,"currency_code":"CAD","in_stock":true},{"title":"671-410","offer_id":39492498522167,"sku":"671-410","price":48.71,"currency_code":"CAD","in_stock":false},{"title":"671-412","offer_id":39492499046455,"sku":"671-412","price":48.71,"currency_code":"CAD","in_stock":false},{"title":"671-414","offer_id":39492499669047,"sku":"671-414","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-510","offer_id":39492500062263,"sku":"671-510","price":48.71,"currency_code":"CAD","in_stock":false},{"title":"671-512","offer_id":39492500226103,"sku":"671-512","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-514","offer_id":39492500455479,"sku":"671-514","price":48.71,"currency_code":"CAD","in_stock":true},{"title":"671-612","offer_id":39492500619319,"sku":"671-612","price":48.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/TitanFineFinishTip1080x1080.jpg?v=1720633201","url":"https:\/\/thepaintpeople.com\/fr\/products\/titan-finition-fine-conseils","provider":"The Paint People","version":"1.0","type":"link"}