{"product_id":"insl-x-waterborne-swimming-pool-paint","title":"Peinture pour piscine à base d'eau INSL-X","description":"\u003ch2\u003eINSL-X Waterborne Swimming Pool Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Waterborne Swimming Pool Paint (WR-1000)\u003c\/strong\u003e is a \u003cstrong\u003ewater-based acrylic pool paint\u003c\/strong\u003e with a semi-gloss finish for concrete, plaster, marcite and gunite pools. It goes over most pool coatings in good condition, so it's the one to choose when you're not sure what's on your pool. It recoats in 4–6 hours, cleans up with soap and water, and once cured it's made for continuous submersion in fresh or salt water.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoes over most pool coatings\u003c\/strong\u003e in good condition, plus bare concrete and plaster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat in 4–6 hours,\u003c\/strong\u003e so both coats go on in one day.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSoap-and-water clean-up.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFresh or salt water.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-gloss finish\u003c\/strong\u003e in 5 ready-mixed colours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eConcrete, plaster, marcite and gunite pools, bare or previously painted. \u003cem\u003eNot for bare fibreglass or steel (use \u003ca href=\"\/fr\/products\/insl-x-epoxy-swimming-pool-paint\"\u003eINSL-X Epoxy\u003c\/a\u003e), vinyl-lined pools, hot tubs or spas. Apply at 10–32 °C with no rain forecast for 3 days.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eReady-mixed in White, Aquamarine, Black, Ocean Blue and Royal Blue, in 3.79 L cans.\u003c\/p\u003e\n\u003ch3\u003eWhich INSL-X Pool Paint?\u003c\/h3\u003e\n\u003cp\u003eChoose Waterborne when you're not sure what's on your pool, or you want the easiest application. Choose \u003ca href=\"\/fr\/products\/insl-x-rubber-based-swimming-pool-paint-rp-satin-finish-3-79l\"\u003eINSL-X Rubber Based\u003c\/a\u003e for a like-for-like recoat of a rubber pool, or \u003ca href=\"\/fr\/products\/insl-x-epoxy-swimming-pool-paint\"\u003eINSL-X Epoxy\u003c\/a\u003e for the toughest finish and for fibreglass or steel.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 300–400 sq ft per 3.79 L per coat. Plan on 250–300 for the first coat on bare plaster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 thin coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWaterborne acrylic emulsion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSemi-gloss, 25–45 @ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoats\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 thin coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 30 min. Recoat 4–6 h. Sand with 150–180 grit if more than 72 h pass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFill\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 days outdoors, 14 days indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–32 °C (50–90 °F), air, surface and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDon't thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 340 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarm soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain and clean\u003c\/strong\u003e with a citrus degreaser, scrubbing the waterline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare plaster:\u003c\/strong\u003e etch, neutralize, rinse three times and dry 3 days. \u003cstrong\u003ePainted:\u003c\/strong\u003e scuff sand with 100–150 grit and dry 24 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll two thin coats,\u003c\/strong\u003e 4–6 hours apart, out of direct sun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure 7 days\u003c\/strong\u003e outdoors or 14 indoors with fans running, then fill.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much Waterborne pool paint do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. A 16 × 32 ft pool, 3½ ft at the shallow end and 8 ft at the deep end, has about 1,064 sq ft of walls and floor. Two coats at 300 sq ft per gallon comes to 8 cans, on a repaint or on bare plaster.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I put it over my existing pool paint?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, over most pool coatings in good condition: water-based, rubber-based or epoxy. Clean it and scuff sand with 100–150 grit. Over epoxy, sand the whole pool with 80-grit and try a test patch first. If the old paint is peeling or there are 4 or more layers, strip it back first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I tell what paint is on my pool now?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eDo a solvent test. Wearing rubber gloves, clean and dry 3 or 4 spots, then rub each with a cotton ball soaked in a solvent, 4–5 passes, using a new spot each time. If denatured alcohol softens it, it's water-based acrylic. If xylene softens it, it's rubber or chlorinated rubber. If MEK softens it, it's epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on a fibreglass, vinyl or steel pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. It's for concrete, plaster, marcite and gunite. For bare fibreglass or steel, use \u003ca href=\"\/fr\/products\/insl-x-epoxy-swimming-pool-paint\"\u003eINSL-X Epoxy\u003c\/a\u003e. None of the INSL-X pool paints are for vinyl liners, hot tubs or spas.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need to acid-etch my pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOnly bare concrete or plaster. Let new plaster cure until the surface pH is 9 or less, or 30–60 days. Etch until the bubbling stops, neutralize with 1 lb of baking soda per 5 gallons of water, rinse three times and let it dry at least 3 days. Never etch a painted pool.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long before I can fill the pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWait at least 7 days after the final coat for an outdoor pool, or 14 days indoors. Run fans across the pool and one pointed down into the deep end, and never cover it with a tarp or solar blanket while it cures. If rain gets in before it's cured, pump it out as soon as you can.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs it safe for a saltwater pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Once it's cured it's made for continuous submersion in fresh or salt water.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long will a painted pool last?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore says to expect about 3 to 5 years before repainting. Chlorine levels, sun, climate, how many coats went on and how much the pool gets used all play a part. Check the finish each fall when you close the pool, and add shock through the skimmer or a chlorinator so concentrated chlorine never sits on the paint.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"3,79 L \/ Blanc","offer_id":39346783518775,"sku":"WR101092F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Aigue-marine","offer_id":39346783551543,"sku":"WR101992F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Noir","offer_id":39346783584311,"sku":"WR102092F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Bleu océan","offer_id":39346783617079,"sku":"WR102392F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Bleu royal","offer_id":39346783649847,"sku":"WR102492F-01","price":112.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/INSL-X-Waterborne-Swimming-Pool-Paint-WR-Semi-Gloss-3_79L.png?v=1681867299","url":"https:\/\/thepaintpeople.com\/fr\/products\/insl-x-waterborne-swimming-pool-paint","provider":"The Paint People","version":"1.0","type":"link"}