{"product_id":"fuji-spray-5070-t70-spray-gun","title":"Pistolet à peinture à turbine HVLP modèle T Fuji, alimentation par le bas","description":"\u003cp\u003eThe \u003cstrong\u003eFuji T-Model T70\u003c\/strong\u003e (5070) is a bottom-feed HVLP turbine spray gun with a 1 qt (1000 mL) pressurized cup. It's a non-bleed gun, so it stirs up less dust in the spray area, and the big cup means fewer refills on cabinets, furniture, doors and trim. Choose the air cap it comes with, from 0.8 mm to 2.5 mm. The standard size is 1.3 mm.\u003c\/p\u003e\n\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 qt bottom-feed cup:\u003c\/strong\u003e The biggest cup in the Fuji gun line, so fewer refills on bigger jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-bleed design:\u003c\/strong\u003e Air only flows when you pull the trigger, so it stirs up less dust in the spray area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-mounted fan control:\u003c\/strong\u003e Set a horizontal, vertical or round pattern, and turn it to make the fan smaller or wider.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage trigger:\u003c\/strong\u003e Air comes first, then material, for a clean start to every pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating nipple:\u003c\/strong\u003e Turns the pressure tube to suit either hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStay Cool Handle:\u003c\/strong\u003e A nylon-coated handle that stays comfortable all day.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications \u0026amp; Recommended Uses\u003c\/h2\u003e\n\u003cp\u003eThe T70's 1 qt cup suits bigger pieces and long runs, where fewer refills save time.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCabinets, doors and trim\u003c\/li\u003e\n\u003cli\u003eFurniture and other larger pieces\u003c\/li\u003e\n\u003cli\u003eMost lacquers, sealers, varnishes and polyurethanes with the standard 1.3 mm cap\u003c\/li\u003e\n\u003cli\u003ePigmented lacquer and oil-based paint with the 1.8 mm cap, and waterborne paint and primer with the 2.0 mm cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFuji says not to tilt the T70 past horizontal unless you use a pressurized liner cup system. For lots of angled work, the G-XPC is a better fit.\u003c\/p\u003e\n\u003ch2\u003eWhich Size Do I Need?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eUse it for\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.8 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100-1\u003c\/td\u003e\n\u003ctd\u003eDyes, inks, shellac and stain. (Ford #4: 8 sec or less)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.0 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100-2\u003c\/td\u003e\n\u003ctd\u003eShellac, stain, sanding sealer and bathtub coatings. (Ford #4: 8 to 17 sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.3 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100-3\u003c\/td\u003e\n\u003ctd\u003eSanding sealer, clear lacquer, varnish and polyurethane. (Ford #4: 17 to 25 sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.5 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100-4\u003c\/td\u003e\n\u003ctd\u003ePolyurethane and pigmented lacquer. (Ford #4: 25 to 37 sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e1.8 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100-5\u003c\/td\u003e\n\u003ctd\u003ePigmented lacquer, oil-based paint and primer. (Ford #4: 37 to 50 sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2.0 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100-6\u003c\/td\u003e\n\u003ctd\u003eWaterborne paint and primer. (Ford #4: 50 to 80 sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e2.5 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100-7\u003c\/td\u003e\n\u003ctd\u003eMulti-fleck finishes. (Ford #4: 80 sec or more)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eUses and #4 Ford cup ranges from Fuji Spray's 5100 chart. The 1.3 mm cap (5100-3) is standard.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFuji T-Model T70 spray gun (5070)\u003c\/li\u003e\n\u003cli\u003e1 qt bottom-feed cup\u003c\/li\u003e\n\u003cli\u003eAir cap set in the size you choose (1.3 mm is standard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe T70 is a gun option on Fuji \u003ca href=\"\/fr\/collections\/fuji-spray-systems\"\u003eMini-Mite Platinum, Q Platinum and D6 systems\u003c\/a\u003e. It takes \u003ca href=\"\/fr\/products\/fuji-spray-5100-series-aircap-sets-for-t-series-spray-gun\"\u003e5100 air cap sets\u003c\/a\u003e and the \u003ca href=\"\/fr\/products\/fuji-spray-5262-rebuild-kit-for-t70-t75-spray-guns\"\u003e5262 rebuild kit\u003c\/a\u003e. It's a turbine gun, not a compressor gun, and it shouldn't be tilted past horizontal. Not sure about your turbine? \u003ca href=\"\/fr\/pages\/contact-page\"\u003eAsk us\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5070, T-Model T70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHVLP turbine spray gun, bottom feed, non-bleed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCup\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 qt (1000 mL) pressurized cup with diaphragm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir cap sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.8, 1.0, 1.3 (standard), 1.5, 1.8, 2.0 and 2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFan control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSide-mounted. Horizontal, vertical or round\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrigger\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-stage: air first, then material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpray distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 to 8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRebuild kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplacement air caps\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5100 series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 months limited (Fuji Spray), original purchaser, from the date of purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFuji Spray, Toronto, Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to Set Up and Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrain and check.\u003c\/strong\u003e Strain the coating and time it with the #4 Ford cup: lift it out and stop when the stream first breaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill the cup.\u003c\/strong\u003e Fit the lid with the diaphragm's small hole to the rear, not right below the air hole in the nipple.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect.\u003c\/strong\u003e Attach the turbine hose and the cup's pressure tube. The nipple turns for either hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet the fluid.\u003c\/strong\u003e Turn the fluid knob clockwise to close it, then back it out until you get enough material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest on cardboard.\u003c\/strong\u003e Spray from 6 to 8 in. Turn the fan control clockwise for a smaller pattern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean after each use.\u003c\/strong\u003e Depressurize, empty the cup, wipe it with a solvent-soaked cloth, then fill with fresh solvent and spray it through.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhy Buy From The Paint People?\u003c\/h2\u003e\n\u003cp\u003eWe're a family-run paint and spray equipment dealer in Mississauga, Ontario, since 1997. Our Rockwood Village spray centre sells, rents and repairs sprayers, and we stock \u003ca href=\"\/fr\/products\/fuji-spray-5100-series-aircap-sets-for-t-series-spray-gun\"\u003e5100 air caps\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/fuji-2095-assembled-1qt-cup-90-degree-nipple\"\u003equart cups\u003c\/a\u003e and other genuine Fuji parts. Orders over $249 ship free in Canada (excluding the territories), and our \u003ca href=\"\/fr\/pages\/best-price-guarantee\"\u003ebest price guarantee\u003c\/a\u003e beats a lower price on the same item. See the full \u003ca href=\"\/fr\/collections\/fuji-spray-systems\"\u003eFuji Spray range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fuji Spray","offers":[{"title":"0,8 mm","offer_id":41236827635767,"sku":"5070-0.8mm-CUSTOM","price":519.0,"currency_code":"CAD","in_stock":true},{"title":"1,0 mm","offer_id":41236827668535,"sku":"5070-1.0mm-CUSTOM","price":519.0,"currency_code":"CAD","in_stock":true},{"title":"1,3mm","offer_id":41236827701303,"sku":"5070-1.3mm","price":519.0,"currency_code":"CAD","in_stock":true},{"title":"1,5mm","offer_id":41236827734071,"sku":"5070-1.5mm-CUSTOM","price":519.0,"currency_code":"CAD","in_stock":true},{"title":"1,8 mm","offer_id":41236827766839,"sku":"5070-1.8mm-CUSTOM","price":519.0,"currency_code":"CAD","in_stock":true},{"title":"2,0 mm","offer_id":41236827799607,"sku":"5070-2.0mm-CUSTOM","price":519.0,"currency_code":"CAD","in_stock":true},{"title":"2,5 mm","offer_id":41236827832375,"sku":"5070-2.5mm-CUSTOM","price":519.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/FujiT701080x1080.jpg?v=1720328100","url":"https:\/\/thepaintpeople.com\/fr\/products\/fuji-spray-5070-t70-spray-gun","provider":"The Paint People","version":"1.0","type":"link"}