{"product_id":"envirolak-envirothane-170-170tb-high-solids-primer","title":"Envirolak Envirothane High Solids Primer, ELPR 170 \u0026 170TB","description":"\u003ch2\u003eEnvirolak Envirothane 170 \u0026amp; 170-TB High Solids Water-Based Primer\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEnvirothane 170\u003c\/strong\u003e is a professional \u003cstrong\u003ewater-based urethane primer\u003c\/strong\u003e for interior wood finishing. It is a \u003cstrong\u003e70% solids white primer\u003c\/strong\u003e with strong filling, and it won't swell MDF fibres. It works as a 1K or 2K product. \u003cstrong\u003e170-TB\u003c\/strong\u003e is the tannin-blocking version for woods that bleed. Both are made for cabinetry, tables, furniture and millwork.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70% solids by weight,\u003c\/strong\u003e for good fill on MDF, veneer and wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast:\u003c\/strong\u003e dry to touch in 10 minutes and ready to sand in 40–60 minutes at 20 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1K or 2K:\u003c\/strong\u003e add CAT100-LV hardener for veneer, solid wood and refinishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC:\u003c\/strong\u003e 54 g\/L, with water clean-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray, brush or roll,\u003c\/strong\u003e including airless, air-assisted airless and HVLP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eInterior cabinets, tables, furniture and millwork in MDF, veneer or solid wood. Use 170-TB over tannin-rich wood. \u003cem\u003eInterior wood only. Professional product: use the 2K system on veneer, solid wood and refinish jobs. Apply with the coating at 20 °C (68 °F) or higher.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eVersions and Sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e170:\u003c\/strong\u003e universal white primer. 3.79 L (1 gal) or 15 L (4 gal).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e170-TB:\u003c\/strong\u003e the same primer with tannin blocking. 3.79 L (1 gal) or 15 L (4 gal).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnvirothane 170, 160-TB or 180?\u003c\/h3\u003e\n\u003cp\u003e170 is the high-fill 1K\/2K white urethane primer. \u003ca href=\"\/fr\/products\/envirocryl-160-tb-tannin-blocking-white-primer\"\u003eEnvirocryl 160-TB\u003c\/a\u003e is a 1K tannin-blocking white primer. \u003ca href=\"\/fr\/products\/envirothane-180-neutral-high-solids-primer\"\u003eEnvirothane 180 Neutral\u003c\/a\u003e is the one to tint for dark colours.\u003c\/p\u003e\n\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilm build:\u003c\/strong\u003e 4–6 mils wet per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer TDS test board:\u003c\/strong\u003e 16–24 g per 0.1 m² (250 × 400 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-based urethane primer, 1K or 2K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolids\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardener (2K)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/fr\/products\/envirocat-100-lv-water-based-hardener\"\u003eCAT100-LV\u003c\/a\u003e, 5% by weight (1.2 kg per 22.7 kg pail). Pot life about 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry at 20 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 10 minutes. Sand 40–60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoating at 20 °C (68 °F) or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpray\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAirless 2,000–3,000 psi. Air-assisted airless 500–800 psi fluid, 25 psi air. HVLP with a 5-stage turbine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReduction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHVLP: 10% ELRX010 or 20–30% water. Cup gun: 2–5% ELRX010 or 10–15% water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSanding\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrimer with 320 or 400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 months unopened at 18–25 °C. Protect from freezing and sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlush equipment with water until it runs clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface.\u003c\/strong\u003e Sand solid wood with 150 or 180 grit and MDF with 240–320 grit. Remove all dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose 1K or 2K.\u003c\/strong\u003e Use 2K on veneer, solid wood or a refinish. Stir in 5% CAT100-LV by weight and mix well.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir and reduce\u003c\/strong\u003e if needed for your equipment. Keep the coating at 20 °C or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply 4–6 mils wet,\u003c\/strong\u003e by spray, brush or roller. Use a nylon or polyester brush, or a mohair, velour or microfibre roller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet it dry.\u003c\/strong\u003e Touch-dry takes about 10 minutes and sanding 40–60 minutes at 20 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand the primer\u003c\/strong\u003e with 320 or 400 grit paper or fine sponges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat\u003c\/strong\u003e with Envirothane or Envirocryl topcoats. Flush equipment with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much primer do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThe TDS gives film weight, not coverage: 16–24 g per 0.1 m². At about 1.5 specific gravity, a 3.79 L can covers roughly 24–35 m² (255–380 sq ft) per coat before spray losses. For 15 m² of cabinets, plan on about half a can per coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat's the difference between 170 and 170-TB?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003e170-TB adds tannin blocking for woods that bleed through finishes. Otherwise both are the same 70% solids white primer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need the hardener?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOn MDF you can use it as a 1K primer. On veneer, solid wood and refinishing, the TDS says to use it as a 2K system with CAT100-LV hardener. Pot life is about 2 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat can I topcoat it with?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eEnvirolak lists \u003ca href=\"\/fr\/products\/envirothane-200-warm-white-topcoat-elnyw200-xx-1-gal-3-79l\"\u003eEnvirothane 200\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/envirocryl-400-white-topcoat-elacw400xx\"\u003eEnvirocryl 400\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/envirolak-envirothane-100\"\u003eEnvirothane 100\u003c\/a\u003e (1K or 2K) or \u003ca href=\"\/fr\/products\/envirolak-800-white-topcoat-elnyw800xx\"\u003eEnvirothane 800\u003c\/a\u003e. Sand the primer with 320 or 400 grit first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat spray equipment works?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eAirless at 2,000–3,000 psi, air-assisted airless at 500–800 psi fluid with 25 psi air, or HVLP with a 5-stage turbine. A cup gun and brush or roller also work.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat temperature does it need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThe coating should be at 20 °C (68 °F) or higher when applied. Store it at 18–25 °C and protect it from freezing and direct sunlight.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it outdoors?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. The TDS covers interior wood finishing: cabinetry, tables, furniture and millwork.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long does it keep, and how do I clean up?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eShelf life is 12 months unopened. Flush equipment with water until it runs clear.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n","brand":"Envirolak","offers":[{"title":"White \/ 170 Apprêt \/ 3,79 L (1 Gal)","offer_id":41260793233463,"sku":"ELPR170-1 Gal","price":103.95,"currency_code":"CAD","in_stock":true},{"title":"White \/ 170 Apprêt \/ 15L (4 Gal)","offer_id":41274023411767,"sku":"ELPR170-4 Gal","price":380.95,"currency_code":"CAD","in_stock":true},{"title":"White \/ 170-TB (Primaire de Blocage de Bronzage) \/ 3,79 L (1 Gal)","offer_id":41260793266231,"sku":"ELPR170-TB","price":131.95,"currency_code":"CAD","in_stock":true},{"title":"White \/ 170-TB (Primaire de Blocage de Bronzage) \/ 15L (4 Gal)","offer_id":41274023444535,"sku":"","price":405.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirothane_170_White_Primer_High_Solids.png?v=1726069846","url":"https:\/\/thepaintpeople.com\/fr\/products\/envirolak-envirothane-170-170tb-primaire-haut-solides","provider":"The Paint People","version":"1.0","type":"link"}