{"title":"Apprêts et peintures spécialisées INSL-X®","description":"","products":[{"product_id":"aqua-lock-plus-primer-sealer","title":"INSL-X Aqua Lock Plus Apprêt et Scellant","description":"\u003ch2\u003eINSL-X Aqua Lock Plus 100% Acrylic Primer Sealer\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Aqua Lock Plus\u003c\/strong\u003e is a water-based, \u003cstrong\u003e100% acrylic primer sealer\u003c\/strong\u003e for interior and exterior surfaces. It \u003cstrong\u003eblocks water stains, tannin, smoke, crayon, graffiti, lipstick and fingerprints\u003c\/strong\u003e, bonds to glossy surfaces, and gives latex or oil topcoats a smooth, even base. It's low VOC, recoats in 1 hour and cleans up with soap and water.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlocks stains:\u003c\/strong\u003e water, tannin, smoke, crayon, graffiti, lipstick and fingerprints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds to glossy surfaces,\u003c\/strong\u003e Formica, ceramic and PVC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast:\u003c\/strong\u003e tack-free in 30 minutes, recoat in 1 hour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite or black,\u003c\/strong\u003e and white tints with up to 2 oz of colorant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInhibits mildew\u003c\/strong\u003e on the paint film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 50 g\/L VOC,\u003c\/strong\u003e MPI #39.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eDrywall, plaster, acoustical tile, wood trim and doors, siding, fences, shutters, cedar and redwood, Formica, ceramic, PVC, masonry, stucco, concrete, block and galvanized metal. Also under wallpaper for easy hanging and removal. \u003cem\u003eApply when the surface is 10 °C or warmer and not within 5° of the dew point. Don't thin.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eWhite in 946 mL, 3.79 L and 18.9 L. Black in 3.79 L and 18.9 L, for deep topcoat colours.\u003c\/p\u003e\n\u003ch3\u003eAqua Lock Plus or Prime Lock Plus?\u003c\/h3\u003e\n\u003cp\u003eBoth block water, smoke and tannin stains. Aqua Lock Plus is water-based, recoats in 1 hour and bonds to more slick surfaces. \u003ca href=\"\/fr\/products\/inslx-prime-lock-plus-primer-sealer\"\u003ePrime Lock Plus\u003c\/a\u003e is oil-based, covers more per can and works down to 7 °C. For cabinets, laminate and glass, use \u003ca href=\"\/fr\/products\/insl-x-stix-waterborne-bonding-primer\"\u003eStix\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e946 mL:\u003c\/strong\u003e about 75–100 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.79 L:\u003c\/strong\u003e 300–400 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18.9 L:\u003c\/strong\u003e 1,500–2,000 sq ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100% acrylic primer sealer, flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTack-free 30 min. Recoat 1 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBrush, roller, or airless spray (2,000+ psi, 0.017–0.021 tip, then back-roll)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 50 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e off dirt, grease and chalk. Kill mildew with a bleach solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrape\u003c\/strong\u003e loose paint and dull glossy surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply a generous coat\u003c\/strong\u003e by brush or roller, or spray and back-roll.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat after 1 hour.\u003c\/strong\u003e Give severe stains a second coat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much Aqua Lock Plus do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOne 3.79 L covers 300–400 sq ft per coat. A 12 × 12 ft room with 8 ft ceilings has about 350 sq ft of wall after doors and windows, so one coat takes about one can. Severe stains may need a second coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat stains does Aqua Lock Plus block?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore lists water stains, tannin, smoke, crayon, graffiti, lipstick and fingerprints. Clean the area first. Difficult stains may need two coats.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhite or black primer?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse white under light and mid colours. Use black under deep colours like navy, charcoal and black, so you need fewer topcoats. White can also be tinted with up to 2 oz of colorant.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long before I can paint over it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eIt's dry to the touch in 30 minutes and ready to recoat in 1 hour. Over glossy surfaces, topcoat in 1–2 hours and allow 3–4 days for full scrape resistance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWill it stick to glossy paint, Formica or tile?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's listed for glossy surfaces, Formica, ceramic and PVC. Benjamin Moore still recommends a light sanding to dull the gloss first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it outside?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's made for interior and exterior surfaces, including wood siding, fences, trim, stucco, masonry and galvanized metal. Don't paint within 5° of the dew point or late in the day when dew may form.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDoes Aqua Lock Plus stop mildew?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eIt contains an agent that inhibits mildew growth on the paint film. Kill existing mildew first with a bleach solution, rinse and let it dry 24–48 hours. It won't fix a moisture problem, so keep bathrooms ventilated.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eAqua Lock Plus or Prime Lock Plus?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBoth block water, smoke, tannin and crayon stains. Aqua Lock Plus is water-based, cleans up with soap and water, recoats in 1 hour, bonds to Formica, tile, PVC and galvanized metal, and comes in black. \u003ca href=\"\/fr\/products\/inslx-prime-lock-plus-primer-sealer\"\u003ePrime Lock Plus\u003c\/a\u003e is oil-based, covers more per can and works down to 7 °C.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e9\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo you ship, or can I pick up?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWe ship across Canada, free on most orders over $249. Pick-up is free at our Rockwood Village store, 1292 Eglinton Ave. E, Mississauga, and most orders are ready within 4 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"946ml (Blanc, 100 pieds carrés)","offer_id":32385334313015,"sku":"AQ-04004","price":22.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (Blanc, 400 pi²)","offer_id":32385334280247,"sku":"AQ040009F","price":61.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (Noir, 400 pi²)","offer_id":32385347452983,"sku":"AQ-04201","price":60.99,"currency_code":"CAD","in_stock":true},{"title":"18.9L (White)","offer_id":42170745552951,"sku":null,"price":304.95,"currency_code":"CAD","in_stock":true},{"title":"18.9L (Black)","offer_id":42170745585719,"sku":null,"price":299.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/AquaLock946ml.jpg?v=1738015033"},{"product_id":"insl-x-stix-waterborne-bonding-primer","title":"INSL-X Stix Primaire de Liaison à Base d'Eau par Benjamin Moore","description":"\u003ch2\u003eINSL-X Stix Waterborne Bonding Primer\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Stix\u003c\/strong\u003e is a waterborne acrylic urethane \u003cstrong\u003ebonding primer\u003c\/strong\u003e that sticks to the surfaces other primers can't: \u003cstrong\u003ePVC, vinyl, plastic, glass, ceramic tile, laminate, glossy paint, fiberglass and galvanized metal\u003c\/strong\u003e. It levels smooth, cures as low as 1.7 °C (35 °F) and can be topcoated with almost any paint, from latex to oil, urethane, epoxy and lacquer.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds to glossy, slick surfaces\u003c\/strong\u003e without heavy sanding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCures in the cold\u003c\/strong\u003e, down to 1.7 °C (35 °F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes almost any topcoat:\u003c\/strong\u003e alkyd, acrylic latex, urethane, epoxy and lacquer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent enamel holdout\u003c\/strong\u003e for a smooth, even topcoat.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInterior and exterior.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoap-and-water clean-up\u003c\/strong\u003e and recoat in 3–4 hours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eKitchen and bathroom cabinets, laminate and Formica, ceramic tile, PVC trim, vinyl siding, fiberglass doors, galvanized and aluminum metal, glass, plus drywall, plaster, wood and masonry. \u003cem\u003eNot for immersion or continuous water contact, below-grade surfaces, polyethylene or polypropylene plastics, or Kynar-coated finishes. Not a whole-house exterior primer over wood or decks, and it must be topcoated outdoors.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColour and Sizes\u003c\/h3\u003e\n\u003cp\u003eWhite, in 946 mL, 3.79 L and 18.9 L. It can be lightly tinted toward your topcoat colour. \u003ca href=\"\/fr\/pages\/contact-page\"\u003eAsk us\u003c\/a\u003e when you order.\u003c\/p\u003e\n\u003ch3\u003eStix or an All-Purpose Primer?\u003c\/h3\u003e\n\u003cp\u003eChoose Stix when the surface is slick or hard to coat. For bare drywall, wood and stain blocking on ordinary surfaces, \u003ca href=\"\/fr\/products\/fresh-start-high-hiding-all-purpose-primer\"\u003eFresh Start High-Hiding All Purpose Primer\u003c\/a\u003e is the better value. For cedar, redwood and other woods that bleed tannin, use \u003ca href=\"\/fr\/products\/inslx-prime-lock-plus-primer-sealer\"\u003ePrime Lock Plus\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePriming kitchen cabinets?\u003c\/strong\u003e Our step-by-step guide, \u003ca href=\"\/fr\/blogs\/news\/how-to-paint-kitchen-cabinets\"\u003eHow to Paint Kitchen Cabinets\u003c\/a\u003e, shows when you need a primer and which one to use.\u003c\/p\u003e\n\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e946 mL:\u003c\/strong\u003e about 75–100 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.79 L:\u003c\/strong\u003e 300–400 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18.9 L:\u003c\/strong\u003e 1,500–2,000 sq ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWaterborne acrylic urethane primer\/sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilm thickness\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.0–5.3 mils wet, 1.6–2.1 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume solids\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40% ± 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 100 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch: 30 min. Recoat: 3–4 hours. Full adhesion: 3–4 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.7–32 °C (35–90 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNylon brush, ¼\"–½\" synthetic roller, airless spray (2,200–2,500 psi, 0.013–0.017 tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTinting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 2 oz per 3.79 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarm soapy water. Final rinse of spray equipment with mineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean.\u003c\/strong\u003e Scrub off dirt, grease, wax and mildew with warm soapy water, rinse and let dry. Cabinets often need a degreaser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegloss.\u003c\/strong\u003e Sand glossy paint, laminate and ceramic tile lightly. Stix doesn't strictly need it, but it improves adhesion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair.\u003c\/strong\u003e Remove loose or peeling paint and loose rust, and fill damaged areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply one coat\u003c\/strong\u003e by brush, roller or airless spray, out of direct sun. Don't thin. Keep it dry for the first 24 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat after 3–4 hours\u003c\/strong\u003e with latex or oil. Wait 24 hours before two-part epoxies or urethanes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet it cure 3–4 days\u003c\/strong\u003e before heavy use, when it reaches full scrape resistance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs Stix good for painting kitchen cabinets?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It bonds to glossy finished cabinets and laminate and gives excellent enamel holdout. Clean and degrease well, scuff sand, prime with Stix and wait 3–4 days before heavy use.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need to sand before using Stix?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eStix is made to bond without sanding, but Benjamin Moore still recommends deglossing Formica, ceramic tile and glossy paint for the best adhesion. A light scuff is enough.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I prime ceramic tile or glass with Stix?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, on walls and backsplashes. It's not for floors, showers or anything under continuous water.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much primer do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOne coat at 300–400 sq ft per 3.79 L. Most kitchen cabinet jobs need about one 3.79 L. The 946 mL suits a vanity or a few doors.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use Stix outside?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, on vinyl, PVC, fiberglass, galvanized metal and similar surfaces, but it must be topcoated. It isn't meant as a whole-house primer over exterior wood or decks.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat topcoat can I use over Stix?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eAlmost anything: acrylic latex, alkyd, urethane, epoxy or lacquer. Wait 3–4 hours for latex or oil, and 24 hours for two-part epoxies and urethanes.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I apply Stix in cold weather?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Air, surface and product just need to be above 1.7 °C (35 °F). Avoid rain and high humidity for the first 24 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n","brand":"INSL-X","offers":[{"title":"946ml (100pi²)","offer_id":32462295662647,"sku":"SXA-110-004","price":27.95,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (400 pieds carrés)","offer_id":32462295629879,"sku":"SXA-1101","price":89.95,"currency_code":"CAD","in_stock":true},{"title":"18.9L (2000 pieds carrés)","offer_id":40481107607607,"sku":"SXA11009F-05","price":419.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/StixPrimer946ml.jpg?v=1700679949"},{"product_id":"tuffcrete-waterborne-acrylic-concrete-stain","title":"TuffCrete® Teinture en Béton Imperméable Acrylique à Base d'Eau","description":"\u003ch2 class=\"font-bold text-h2 leading-[45px] pt-[30px] pb-[4px] [\u0026amp;_a]:underline-offset-[6px] [\u0026amp;_.underline]:underline-offset-[6px]\" dir=\"ltr\"\u003e\u003cspan\u003eTransformez vos surfaces avec TuffCrete® Teinture en béton imperméable acrylique à base d'eau\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"text-body font-regular leading-[24px] pt-[9px] pb-[2px]\" dir=\"ltr\"\u003e\u003cspan\u003eImaginez transformer vos surfaces de maçonnerie ternes et sans vie en œuvres d'art vibrantes et durables. Avec TuffCrete® Teinture en Béton Étanche Acrylique à Base d'Eau, redonnez vie à vos espaces—qu'il s'agisse de patios, de terrasses de piscine ou de sols de sous-sol—avec un produit conçu pour exceller à l'intérieur comme à l'extérieur de votre maison.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-bold text-h3 leading-[36px] pt-[21px] pb-[2px] [\u0026amp;_a]:underline-offset-[6px] [\u0026amp;_.underline]:underline-offset-[6px]\" dir=\"ltr\"\u003e\u003cspan\u003eDurabilité et style incomparables\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"text-body font-regular leading-[24px] pt-[9px] pb-[2px]\" dir=\"ltr\"\u003e\u003cspan\u003eTuffCrete® se distingue par sa résistance robuste à la décoloration, aux éraflures et à l'abrasion, garantissant que vos surfaces restent aussi immaculées que le jour où elles ont été revêtues. Ce revêtement préserve non seulement l'intégrité de votre maçonnerie, mais retarde également l'écaillage et la poussière, offrant une finition satinée à la fois robuste et lisse qui promet de résister à l'épreuve du temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"text-body font-regular leading-[24px] pt-[9px] pb-[2px]\" dir=\"ltr\"\u003e\u003cspan\u003eCaractéristiques clés\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTeinture acrylique à base d'eau pour surfaces en maçonnerie intérieures ou extérieures\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRésistant à la décoloration\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRésistant aux éraflures et à l'abrasion\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRetards d'écaillage et de poussière\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRevêtement robuste et durable\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFini lisse et satiné\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIl peut être appliqué en une couche comme une teinture, ou en deux couches comme une finition opaque\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"font-bold text-h3 leading-[36px] pt-[21px] pb-[2px] [\u0026amp;_a]:underline-offset-[6px] [\u0026amp;_.underline]:underline-offset-[6px]\" dir=\"ltr\"\u003e\u003cspan\u003eCouleurs Disponibles\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"text-body font-regular leading-[24px] pt-[9px] pb-[2px]\" dir=\"ltr\"\u003e\u003cspan\u003eDisponible dans une gamme de couleurs époustouflantes, TuffCrete® offre :\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"pt-[9px] pb-[2px] pl-[24px] list-disc [\u0026amp;_ul]:pt-[5px] pt-[5px]\"\u003e\n\u003cli value=\"1\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eCST-2100 Clair\u003c\/strong\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli value=\"2\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eCST-2110 Blanc teintable\u003c\/strong\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli value=\"3\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eCST-2308 Perle Grise\u003c\/strong\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003cli value=\"4\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eCST-2310 Gris Clair\u003c\/strong\u003e\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text-body font-regular leading-[24px] pt-[9px] pb-[2px]\" dir=\"ltr\"\u003e\u003cspan\u003eQue vous visiez une teinte subtile ou une finition plus opaque, TuffCrete® offre des options polyvalentes pour répondre à vos besoins esthétiques et fonctionnels.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-bold text-h3 leading-[36px] pt-[21px] pb-[2px] [\u0026amp;_a]:underline-offset-[6px] [\u0026amp;_.underline]:underline-offset-[6px]\" dir=\"ltr\"\u003e\u003cspan\u003eApplication de précision pour des avantages durables\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"text-body font-regular leading-[24px] pt-[9px] pb-[2px]\" dir=\"ltr\"\u003e\u003cspan\u003eBien que TuffCrete® soit conçu pour l'excellence, une application appropriée est essentielle pour libérer tout son potentiel. Idéal pour les murs en béton, les balcons, les patios, et plus encore, la teinture ne doit pas être utilisée sur les allées ou les sols de garage. Suivez ces étapes pour de meilleurs résultats :\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"pt-[9px] pb-[2px] pl-[24px] list-disc [\u0026amp;_ul]:pt-[5px] pt-[5px]\"\u003e\n\u003cli value=\"1\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\n\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eOutils d'application\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e: Utilisez une brosse en nylon, un rouleau à poils courts ou un spray.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli value=\"2\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\n\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eCouverture\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e: Obtenez une couverture optimale allant jusqu'à 550 pieds carrés par gallon.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli value=\"3\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\n\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eTemps de séchage\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e: Permettez 24 heures pour un trafic léger et 72 heures pour une utilisation plus intensive.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli value=\"4\" class=\"text-body font-regular leading-[24px] my-[5px] [\u0026amp;\u0026gt;ol]:!pt-0 [\u0026amp;\u0026gt;ol]:!pb-0 [\u0026amp;\u0026gt;ul]:!pt-0 [\u0026amp;\u0026gt;ul]:!pb-0\"\u003e\n\u003cb\u003e\u003cstrong class=\"font-bold\"\u003eConditions\u003c\/strong\u003e\u003c\/b\u003e\u003cspan\u003e: Évitez la lumière directe du soleil et assurez-vous que les températures se situent entre 50 °F et 90 °F.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text-body font-regular leading-[24px] pt-[9px] pb-[2px]\" dir=\"ltr\"\u003e\u003cspan\u003eCes directives garantissent que vos surfaces non seulement ont l'air spectaculaires mais durent dans le temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"INSL-X","offers":[{"title":"3,78L \/ Clair","offer_id":40160250593335,"sku":"CST210009F-01","price":75.27,"currency_code":"CAD","in_stock":true},{"title":"3,78L \/ Blanc teintable","offer_id":40160250626103,"sku":"CST211009F","price":73.07,"currency_code":"CAD","in_stock":true},{"title":"3,78L \/ Perle Grise","offer_id":40160250658871,"sku":"CST230809F-01","price":75.27,"currency_code":"CAD","in_stock":true},{"title":"3,78L \/ Gris clair","offer_id":40160250691639,"sku":"CST231009F","price":75.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/INSL_XTuffcrete1080x1080.jpg?v=1723052667"},{"product_id":"benjamin-moore-garage-guard-epoxy-floor-paint","title":"Peinture de sol époxy Garage Guard Benjamin Moore","description":"\u003ch2\u003eINSL-X GarageGuard 2-Part Waterborne Epoxy Floor Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X GarageGuard Epoxy\u003c\/strong\u003e is a \u003cstrong\u003e2-part waterborne epoxy floor paint\u003c\/strong\u003e for indoor garage, basement and commercial concrete floors. It cures to a tough, cross-linked \u003cstrong\u003esemi-gloss\u003c\/strong\u003e that resists \u003cstrong\u003ehot tire pickup\u003c\/strong\u003e, abrasion, impact and most automotive fluids, and it cleans up with soap and water.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 2-part epoxy\u003c\/strong\u003e with performance Benjamin Moore compares to solvent-based epoxies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResists hot tire pickup,\u003c\/strong\u003e abrasion, impact and most automotive fluids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoes over most sound coatings\u003c\/strong\u003e without lifting or wrinkling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast return to service:\u003c\/strong\u003e walk on it in 24 hours, park in 72.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSoap-and-water clean-up.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eInterior concrete: garage and basement floors, workshops, warehouses and commercial floors. \u003cem\u003eInterior only, because sunlight makes epoxy chalk and fade. Not for immersion or acid exposure. For driveways and patios, use \u003ca href=\"\/fr\/products\/insl-x-garageguard-1-part-concrete-garage-floor-paint\"\u003eGarageGuard 1-Part\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eShowroom Gray\u003c\/strong\u003e and \u003cstrong\u003eDesert Sand\u003c\/strong\u003e, ready-mixed, in kits that make 3.79 L. A 2-car garage takes 4 kits for two coats.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e250–300 sq ft per kit per coat. 2 coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSemi-gloss (35–55 at 60°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3:1 by volume. Stand 30 min. Use within 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTack-free 2 h. Recoat 8 h. Light foot traffic 24 h. Cool tires 72 h. Hot tires 5–7 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–32 °C, not within 5° of the dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\/8–1\/2 in nap roller, synthetic brush or airless spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater, up to 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e210.7 g\/L mixed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and degrease\u003c\/strong\u003e the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEtch bare concrete\u003c\/strong\u003e to an 80-grit feel, neutralize, rinse and dry 24 hours. On painted floors, do a tape test and sand instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix the full kit 3:1,\u003c\/strong\u003e let it stand 30 minutes and use it within 4 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo coats,\u003c\/strong\u003e 8 hours apart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalk on it after 24 hours\u003c\/strong\u003e and park after 72.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much GarageGuard Epoxy do I need for a 2-car garage?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eA 2-car garage is about 22 × 22 ft, or 484 sq ft. Two coats means about 970 sq ft to cover. At 250–300 sq ft per kit, that's 4 kits. A 1-car garage, about 12 × 22 ft, takes 3.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eEpoxy or GarageGuard 1-Part?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBoth resist hot tire pickup. GarageGuard Epoxy is a true 2-part epoxy with a semi-gloss finish, for indoor floors that take heavy wear and chemicals. \u003ca href=\"\/fr\/products\/insl-x-garageguard-1-part-concrete-garage-floor-paint\"\u003eGarageGuard 1-Part\u003c\/a\u003e needs no mixing, covers more per can and also works outside on driveways and patios.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I mix it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eStir Part A and Part B separately, then combine the full kit 3:1 by volume with a low-speed drill mixer. Let it stand 30 minutes, the same for every kit, and use it within 4 hours at 25 °C. Never mix part of a kit.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhen can I park on it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eCool tires after 72 hours. Wait 5–7 days before you drive in with hot tires from the road. Light foot traffic is fine after 24 hours. Cool, damp weather stretches every time.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need to etch the concrete?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBare concrete has to be roughened so the epoxy can grip. Etch it with a concrete etching solution or 10% muriatic acid, neutralize, rinse and let it dry at least 24 hours. It should feel like 80-grit sandpaper. Never etch a painted floor.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I put it over my old floor paint?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOften, yes. It goes over most coatings without lifting. Do a tape test first: cut an X through the paint, press duct tape over it and pull it off fast. If more than 25% of the paint at the X lifts, remove it all. Don't etch a painted floor.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it outside?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. It's for interior floors only, because sunlight makes epoxy chalk and fade. For a driveway or patio, use \u003ca href=\"\/fr\/products\/insl-x-garageguard-1-part-concrete-garage-floor-paint\"\u003eGarageGuard 1-Part\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs it slippery?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eLike any glossy floor, it can be slippery when wet. Benjamin Moore suggests adding an anti-slip aggregate where you need grip, such as by the door and on ramps.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e9\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I do my garage floor in the fall?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, if the air, the floor and the epoxy stay between 10 °C and 32 °C and you're not within 5° of the dew point. Below 10 °C it won't cure properly. In Ontario, pick a mild stretch or heat the garage.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e10\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWill brake fluid stain it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eIt can. Long contact with brake fluid may stain the finish, and epoxy can yellow over time. Neither affects how well it holds up. Wipe up spills promptly.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"Kit \/ Sable du désert","offer_id":40162368127031,"sku":"EGG922S9F-1K","price":155.99,"currency_code":"CAD","in_stock":true},{"title":"Kit \/ Salle d'exposition Gris","offer_id":40162368159799,"sku":"EGG310S9F","price":155.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/GarageGuardKit1080x1080.jpg?v=1711682201"},{"product_id":"insl-x-hot-trax-concrete-garage-floor-paint","title":"Peinture de sol en béton de garage Hot Trax","description":"\u003ch2\u003eRevitalisez votre espace avec INSL-X Hot Trax : La peinture de sol en béton ultime !\u003c\/h2\u003e\n\u003cp\u003eTransformez votre garage ou votre allée avec la peinture pour sol en béton INSL-X Hot Trax. Conçue pour le propriétaire moderne, cette peinture haute performance ajoute une finition protectrice, attrayante et durable à vos surfaces. Que vous embellissiez votre garage ou que vous amélioriez vos allées extérieures, Hot Trax offre une solution polyvalente pour les surfaces en béton intérieures et extérieures.\u003c\/p\u003e\n\u003ch2\u003eCaractéristiques et Avantages\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e⭐ \u003c\/span\u003eRésiste à la prise de pneus chauds :\u003c\/strong\u003e Marre des marques de pneus inesthétiques ? Hot Trax résiste à l'accumulation qui affecte souvent les allées et les sols de garage, maintenant un aspect impeccable même après une utilisation intensive des véhicules.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e⭐ \u003c\/span\u003eProtection contre les produits chimiques et les taches :\u003c\/strong\u003e Inquiet des éclaboussures ? Ce revêtement acrylique forme un sceau robuste qui protège contre les produits chimiques, l'eau, l'huile et la graisse, garantissant que vos surfaces restent propres et sans dommages.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e⭐ \u003c\/span\u003eFormule à faibles COV :\u003c\/strong\u003e Respirez facilement en sachant que la formule à faibles COV de Hot Trax signifie moins d'émissions, ce qui en fait un choix plus sûr pour votre foyer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e⭐ \u003c\/span\u003eFini Satiné Durable:\u003c\/strong\u003e Profitez d'une finition satinée mate qui non seulement a fière allure mais résiste également aux fissures. Elle est conçue pour durer, supportant les rigueurs du trafic piéton et véhiculaire quotidien.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e⭐ \u003c\/span\u003eRetour rapide au service :\u003c\/strong\u003e L'efficacité est essentielle. Vous pouvez marcher sur votre sol fraîchement peint dans les 24 heures et reprendre l'utilisation complète de votre véhicule en seulement 5 à 7 jours.\u003c\/p\u003e\n\u003ch2\u003eUtilisations recommandées\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch4\u003eParfait pour les applications intérieures et extérieures, Hot Trax est idéal pour :\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSols de garage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllées\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllées\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePatios\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePavés\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBéton, maçonnerie, stuc, blocs et surfaces en brique\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions d'application\u003cbr\u003e\n\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e Assurez-vous que la surface est complètement sèche et propre. Remuez bien le produit avant utilisation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutils d'application :\u003c\/strong\u003e Utilisez un pinceau de qualité ou un rouleau de 3\/8 po. Évitez l'application par pulvérisation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication de la peinture : \u003c\/strong\u003eAppliquez directement depuis le pot sans dilution. Maintenez un bord humide pour éviter les marques de chevauchement. Pour l'uniformité, mélangez différents contenants de la même couleur avant l'application.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessus de revêtement : \u003c\/strong\u003eAppliquez une couche fine et uniforme et laissez sécher pendant 24 heures. Suivez avec une deuxième couche appliquée dans une direction croisée par rapport à la première, en veillant à une couverture complète.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsidérations environnementales :\u003c\/strong\u003e Appliquez à des températures supérieures à 50°F, évitez la lumière directe du soleil et assurez une bonne ventilation pour un séchage optimal.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGestion du trafic :\u003c\/strong\u003e Permettez 24 heures pour un trafic piéton léger, 48 heures pour un trafic piéton lourd, 5 jours pour des pneus froids, et 7 jours pour des pneus chauds.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eQuestions Fréquemment Posées : Peinture de Sol en Béton de Garage INSL-X Hot Trax\u003c\/h2\u003e\n\u003ch4\u003e\n\u003cstrong\u003eQ1 : Les Hot Trax peuvent-ils être utilisés sur des surfaces autres que le béton ?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOui, il est également adapté aux surfaces en maçonnerie, en stuc, en blocs et en briques.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cstrong\u003eQ2 : Est-il nécessaire d'appliquer deux couches ?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOui, deux couches sont recommandées pour une durabilité et des performances optimales.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cstrong\u003eQ3 : Que dois-je faire si je dois peindre dans des conditions plus fraîches ?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAssurez-vous que la température est supérieure à 50°F et que les conditions de surface ne sont pas proches du point de rosée.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cstrong\u003eQ4 : Comment nettoyer après avoir peint ?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUtilisez simplement du savon et de l'eau pour nettoyer les pinceaux et les rouleaux.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003cstrong\u003eQ5 : Puis-je accélérer le processus de séchage avec des ventilateurs ou des chauffages ?\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUne bonne ventilation est encouragée, mais évitez la chaleur excessive car cela peut affecter la qualité de la finition.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INSL-X","offers":[{"title":"Gris argenté","offer_id":40045506297911,"sku":"HTF-30901","price":74.99,"currency_code":"CAD","in_stock":false},{"title":"Gris clair","offer_id":40045506330679,"sku":"HTF-31001","price":74.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/INSL-XHotTrax_1080x1080_6d54d490-3aa9-466b-916c-0e6b71c2741e.jpg?v=1727233396"},{"product_id":"insl-x-cabinet-coat-urethane-acrylic-satin-enamel-cabinet-paint","title":"Peinture pour meuble INSL-X Cabinet Coat - Émail acrylique uréthane","description":"\u003chtml\u003e\u003cbody\u003e\u003ch2\u003eINSL-X Cabinet Coat est la peinture parfaite pour la rénovation des armoires de cuisine et de salle de bain, des étagères, des meubles, des moulures et des corniches.\u003c\/h2\u003e\n\u003cp\u003eINSL-X Cabinet Coat est une finition acrylique uréthane ultra lisse et durable qui résiste aux éclats, aux éraflures, aux taches alimentaires, à la graisse et à l'eau. La peinture pour armoires est disponible en plusieurs couleurs avec une finition satinée élégante qui donnera à votre maison un aspect digne d'une usine.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCaractéristiques :\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFinition ultra-lisse\u003c\/li\u003e\n\u003cli\u003eFormule uréthane-acrylique\u003c\/li\u003e\n\u003cli\u003eRemet à neuf les armoires usées\u003c\/li\u003e\n\u003cli\u003eAdhère aux surfaces difficiles à revêtir sans apprêt\u003cbr\/\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eComment appliquer la peinture INSL-X Cabinet Coat\u003c\/h2\u003e\n\u003cp\u003e\u003ciframe height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/dv2UCF1aH0k\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\u003c\/body\u003e\u003c\/html\u003e","brand":"INSL-X","offers":[{"title":"946ml (100pi²)","offer_id":40045403504695,"sku":"CC-65XX-004","price":36.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (400 pieds carrés)","offer_id":40045403537463,"sku":"CC-65XX-001","price":98.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/INSL-X-Cabinet-Coat-Urethane-Acrylic-Satin-Enamel-Cabinet-Paint.png?v=1681867291"},{"product_id":"fire-retardant-paint-flat-fr-210","title":"INSL-X Fire Retardant Paint, Class A Intumescent Coating, FR-210","description":"\u003ch2\u003eINSL-X FR-210 Fire Retardant Paint, Class A Intumescent Coating\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X FR-210\u003c\/strong\u003e is a flat latex \u003cstrong\u003eintumescent fire retardant paint\u003c\/strong\u003e for interior ceilings, walls and trim. It goes on like ordinary paint. When it's exposed to heat, it swells into an insulating char layer that slows flame spread and cuts smoke. It is \u003cstrong\u003eClass A rated\u003c\/strong\u003e under \u003cstrong\u003eCAN\/ULC S-102\u003c\/strong\u003e and ASTM E84.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A flame spread:\u003c\/strong\u003e flame spread index 0 and smoke developed index 35.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanadian rating:\u003c\/strong\u003e tested to CAN\/ULC S-102.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-minute extended test\u003c\/strong\u003e (ASTM E2768) with two coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecorative flat finish\u003c\/strong\u003e with high hide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC\u003c\/strong\u003e 100% acrylic with soap-and-water clean-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan be topcoated\u003c\/strong\u003e with a regular acrylic paint without affecting the flame spread rating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eInterior walls, ceilings and trim over primed or previously painted drywall, wood, plaster, cellulose ceiling tile, masonry and metal. Basements, utility rooms, garages, stairwells, corridors and commercial interiors. \u003cem\u003eNot for exteriors or floors, and not a substitute for fire-rated drywall or assemblies that need an hourly fire-resistance rating. For exteriors, see \u003ca href=\"\/fr\/products\/flame-control-exterior-guard-basecoat-20-20a\"\u003eFlame Control Exterior Guard Basecoat\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColour and Sizes\u003c\/h3\u003e\n\u003cp\u003eWhite only, in 3.79 L (150 sq ft) and 18.9 L (750 sq ft).\u003c\/p\u003e\n\u003ch3\u003eFR-210 or Flame Control 20-20A?\u003c\/h3\u003e\n\u003cp\u003eBoth are water-based, interior, Class A intumescent paints. FR-210 is made by Benjamin Moore, with a flame spread index of 0. \u003ca href=\"\/fr\/products\/flame-control-20-20a\"\u003eFlame Control 20-20A\u003c\/a\u003e also comes in black. See every option in our \u003ca href=\"\/fr\/collections\/fire-retardant-flame-retardant-intumescent-coatings\"\u003efire retardant coatings collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFire rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClass A: ASTM E84 \/ UL 723 and CAN\/ULC S-102 (1 coat). ASTM E2768 30-minute (2 coats)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlame spread \/ smoke\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 \/ 35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e150 sq ft per 3.79 L per coat. Don't exceed it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10.7 mils wet, 5.2 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat (under 10 at 85°)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 30 min. Recoat 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–32 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBrush, roller or airless spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 50 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrep.\u003c\/strong\u003e Clean, scrape loose paint and dull any gloss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare surfaces\u003c\/strong\u003e with \u003ca href=\"\/fr\/products\/aqua-lock-plus-primer-sealer\"\u003eAqua Lock Plus\u003c\/a\u003e, or \u003ca href=\"\/fr\/products\/inslx-prime-lock-plus-primer-sealer\"\u003ePrime Lock Plus\u003c\/a\u003e on wood that bleeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir well.\u003c\/strong\u003e Don't tint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply one full coat\u003c\/strong\u003e at 150 sq ft per 3.79 L.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor the 30-minute rating,\u003c\/strong\u003e add a second coat after 2 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much fire retardant paint do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. Each 3.79 L covers 150 sq ft per coat, and an 18.9 L pail covers 750 sq ft. For 1,000 sq ft of walls and ceiling, one coat takes about 7 gallons (a pail plus two gallons), and two coats take about 14. Apply it at the full rate.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eOne coat or two?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOne full coat gives the Class A rating under ASTM E84 \/ UL 723 and CAN\/ULC S-102. Two coats give Class A in the 30-minute extended ASTM E2768 test. Check which one your project calls for.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow does intumescent paint work?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWhen it's heated, FR-210 swells into a thick, cellular char layer. That layer insulates the surface underneath, slows the spread of flame and cuts down smoke.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWill it meet building code for a basement or rental unit?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eFR-210 gives a Class A flame spread rating, which is what many flame-spread requirements ask for. It is not an hourly fire-resistance rating and doesn't replace fire-rated drywall separations. Requirements vary by municipality, so confirm with your building inspector before you buy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I make sure I get the rating?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eApply it at no more than 150 sq ft per 3.79 L, which is 10.7 mils wet and 5.2 mils dry. Don't stretch it, and don't thin it with more than 236 mL of water per can. A wet film gauge is the easiest way to check as you go. Rough or porous surfaces use more.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I paint it over my existing paint?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, if the old paint is sound, clean and dry. Scrape anything peeling, sand glossy areas dull and prime any bare spots first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need a primer?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOn bare surfaces, yes. Use \u003ca href=\"\/fr\/products\/aqua-lock-plus-primer-sealer\"\u003eAqua Lock Plus\u003c\/a\u003e on drywall, plaster, wood and masonry, Prime Lock Plus on wood that bleeds, and a metal primer on metal.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I tint it or paint over it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore says not to tint FR-210. To get a colour, topcoat it with a regular acrylic paint. That won't affect the flame spread rating.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e9\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it outside or on floors?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. FR-210 is for interior walls, ceilings and trim only. For exterior wood, look at \u003ca href=\"\/fr\/products\/flame-control-exterior-guard-basecoat-20-20a\"\u003eFlame Control Exterior Guard Basecoat\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e10\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eFR-210 or Flame Control 20-20A?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBoth are interior, water-based, Class A intumescent paints. FR-210 is made by Benjamin Moore, with a flame spread index of 0 and a CAN\/ULC S-102 rating. \u003ca href=\"\/fr\/products\/flame-control-20-20a\"\u003eFlame Control 20-20A\u003c\/a\u003e also comes in black.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"3,79 L (150 pieds carrés) \/ Blanc","offer_id":40162983673911,"sku":"FR21009F-01","price":147.93,"currency_code":"CAD","in_stock":true},{"title":"18.9L (750 pieds carrés) \/ Blanc","offer_id":40162983706679,"sku":"FR21009F-05","price":699.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/Insl-X_Fire_Retardant_Paint_Flat_FR-210_600x_a26de051-f82f-4281-8695-6628781d949a.png?v=1681867143"},{"product_id":"insl-x-waterborne-swimming-pool-paint","title":"Peinture pour piscine à base d'eau INSL-X","description":"\u003ch2\u003eINSL-X Waterborne Swimming Pool Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Waterborne Swimming Pool Paint (WR-1000)\u003c\/strong\u003e is a \u003cstrong\u003ewater-based acrylic pool paint\u003c\/strong\u003e with a semi-gloss finish for concrete, plaster, marcite and gunite pools. It goes over most pool coatings in good condition, so it's the one to choose when you're not sure what's on your pool. It recoats in 4–6 hours, cleans up with soap and water, and once cured it's made for continuous submersion in fresh or salt water.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGoes over most pool coatings\u003c\/strong\u003e in good condition, plus bare concrete and plaster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat in 4–6 hours,\u003c\/strong\u003e so both coats go on in one day.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSoap-and-water clean-up.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFresh or salt water.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-gloss finish\u003c\/strong\u003e in 5 ready-mixed colours.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eConcrete, plaster, marcite and gunite pools, bare or previously painted. \u003cem\u003eNot for bare fibreglass or steel (use \u003ca href=\"\/fr\/products\/insl-x-epoxy-swimming-pool-paint\"\u003eINSL-X Epoxy\u003c\/a\u003e), vinyl-lined pools, hot tubs or spas. Apply at 10–32 °C with no rain forecast for 3 days.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eReady-mixed in White, Aquamarine, Black, Ocean Blue and Royal Blue, in 3.79 L cans.\u003c\/p\u003e\n\u003ch3\u003eWhich INSL-X Pool Paint?\u003c\/h3\u003e\n\u003cp\u003eChoose Waterborne when you're not sure what's on your pool, or you want the easiest application. Choose \u003ca href=\"\/fr\/products\/insl-x-rubber-based-swimming-pool-paint-rp-satin-finish-3-79l\"\u003eINSL-X Rubber Based\u003c\/a\u003e for a like-for-like recoat of a rubber pool, or \u003ca href=\"\/fr\/products\/insl-x-epoxy-swimming-pool-paint\"\u003eINSL-X Epoxy\u003c\/a\u003e for the toughest finish and for fibreglass or steel.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 300–400 sq ft per 3.79 L per coat. Plan on 250–300 for the first coat on bare plaster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 thin coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWaterborne acrylic emulsion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSemi-gloss, 25–45 @ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoats\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 thin coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 30 min. Recoat 4–6 h. Sand with 150–180 grit if more than 72 h pass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFill\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 days outdoors, 14 days indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–32 °C (50–90 °F), air, surface and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDon't thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 340 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarm soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrain and clean\u003c\/strong\u003e with a citrus degreaser, scrubbing the waterline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare plaster:\u003c\/strong\u003e etch, neutralize, rinse three times and dry 3 days. \u003cstrong\u003ePainted:\u003c\/strong\u003e scuff sand with 100–150 grit and dry 24 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll two thin coats,\u003c\/strong\u003e 4–6 hours apart, out of direct sun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure 7 days\u003c\/strong\u003e outdoors or 14 indoors with fans running, then fill.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much Waterborne pool paint do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. A 16 × 32 ft pool, 3½ ft at the shallow end and 8 ft at the deep end, has about 1,064 sq ft of walls and floor. Two coats at 300 sq ft per gallon comes to 8 cans, on a repaint or on bare plaster.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I put it over my existing pool paint?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, over most pool coatings in good condition: water-based, rubber-based or epoxy. Clean it and scuff sand with 100–150 grit. Over epoxy, sand the whole pool with 80-grit and try a test patch first. If the old paint is peeling or there are 4 or more layers, strip it back first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I tell what paint is on my pool now?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eDo a solvent test. Wearing rubber gloves, clean and dry 3 or 4 spots, then rub each with a cotton ball soaked in a solvent, 4–5 passes, using a new spot each time. If denatured alcohol softens it, it's water-based acrylic. If xylene softens it, it's rubber or chlorinated rubber. If MEK softens it, it's epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on a fibreglass, vinyl or steel pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. It's for concrete, plaster, marcite and gunite. For bare fibreglass or steel, use \u003ca href=\"\/fr\/products\/insl-x-epoxy-swimming-pool-paint\"\u003eINSL-X Epoxy\u003c\/a\u003e. None of the INSL-X pool paints are for vinyl liners, hot tubs or spas.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need to acid-etch my pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOnly bare concrete or plaster. Let new plaster cure until the surface pH is 9 or less, or 30–60 days. Etch until the bubbling stops, neutralize with 1 lb of baking soda per 5 gallons of water, rinse three times and let it dry at least 3 days. Never etch a painted pool.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long before I can fill the pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWait at least 7 days after the final coat for an outdoor pool, or 14 days indoors. Run fans across the pool and one pointed down into the deep end, and never cover it with a tarp or solar blanket while it cures. If rain gets in before it's cured, pump it out as soon as you can.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs it safe for a saltwater pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Once it's cured it's made for continuous submersion in fresh or salt water.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long will a painted pool last?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore says to expect about 3 to 5 years before repainting. Chlorine levels, sun, climate, how many coats went on and how much the pool gets used all play a part. Check the finish each fall when you close the pool, and add shock through the skimmer or a chlorinator so concentrated chlorine never sits on the paint.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"3,79 L \/ Blanc","offer_id":39346783518775,"sku":"WR101092F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Aigue-marine","offer_id":39346783551543,"sku":"WR101992F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Noir","offer_id":39346783584311,"sku":"WR102092F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Bleu océan","offer_id":39346783617079,"sku":"WR102392F-01","price":112.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Bleu royal","offer_id":39346783649847,"sku":"WR102492F-01","price":112.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/INSL-X-Waterborne-Swimming-Pool-Paint-WR-Semi-Gloss-3_79L.png?v=1681867299"},{"product_id":"insl-x-rubber-based-swimming-pool-paint-rp-satin-finish-3-79l","title":"INSL-X Rubber Based Swimming Pool Paint, Satin","description":"\u003ch2\u003eINSL-X Rubber Based Swimming Pool Paint, Satin\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Rubber Based Swimming Pool Paint (RP-2700)\u003c\/strong\u003e is a \u003cstrong\u003esynthetic rubber pool paint\u003c\/strong\u003e with a durable, low-sheen satin finish for residential and commercial concrete pools. It's the like-for-like recoat for pools already painted with rubber or chlorinated rubber, and it goes on bare concrete, marcite and gunite too. It resists fading, abrasion and alkalis in fresh, salt and chlorinated water.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoats rubber and chlorinated rubber\u003c\/strong\u003e pool paint.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSatin, low-sheen finish.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400–500 sq ft per gallon,\u003c\/strong\u003e the most of any INSL-X pool paint.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFresh, salt and chlorinated water.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eResists fading, abrasion and alkalis.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eConcrete, marcite and gunite pools, bare or previously painted with rubber or chlorinated rubber. \u003cem\u003eNot over epoxy or water-based pool paint (use \u003ca href=\"\/fr\/products\/insl-x-epoxy-swimming-pool-paint\"\u003eINSL-X Epoxy\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/insl-x-waterborne-swimming-pool-paint\"\u003eINSL-X Waterborne\u003c\/a\u003e). Not for fibreglass, steel or vinyl-lined pools, hot tubs or spas.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eReady-mixed in White, Aquamarine, Black, Ocean Blue and Royal Blue, in 3.79 L cans.\u003c\/p\u003e\n\u003ch3\u003eWhich INSL-X Pool Paint?\u003c\/h3\u003e\n\u003cp\u003eBoth Rubber Based and \u003ca href=\"\/fr\/products\/insl-x-waterborne-swimming-pool-paint\"\u003eINSL-X Waterborne\u003c\/a\u003e can recoat a rubber pool. Rubber Based is the like-for-like choice with more coverage per gallon. Waterborne recoats faster, cleans up with water and goes over most coatings.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 400–500 sq ft per 3.79 L per coat. Plan on 250–300 for the first coat on bare plaster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 thin coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSynthetic rubber, solvent-based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSatin, 5–10 @ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoats\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 thin coats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 30 min. Recoat 12–24 h. Sand with 150–180 grit if more than 72 h pass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFill\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 days outdoors, 14 days indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–32 °C (50–90 °F), air, surface and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 340 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXylene, then warm soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm it's rubber\u003c\/strong\u003e with a xylene test, then drain and clean with a citrus degreaser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare plaster:\u003c\/strong\u003e etch, neutralize, rinse three times and dry 3 days. \u003cstrong\u003ePainted:\u003c\/strong\u003e scuff sand with 100–150 grit and dry 24 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll two thin coats,\u003c\/strong\u003e 12–24 hours apart, out of direct sun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure 7 days\u003c\/strong\u003e outdoors or 14 indoors with fans running, then fill.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much Rubber Based pool paint do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. A 16 × 32 ft pool, 3½ ft at the shallow end and 8 ft at the deep end, has about 1,064 sq ft of walls and floor. Two coats at 400 sq ft per gallon is 6 cans for a repaint, or 7 on bare plaster, which soaks up more of the first coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat can it go over?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBare concrete, plaster, marcite and gunite, or a rubber-based or chlorinated rubber pool paint in good condition. It doesn't go over epoxy or water-based pool paint. If there are 4 or more old layers, strip it back first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I tell what paint is on my pool now?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eDo a solvent test. Wearing rubber gloves, clean and dry 3 or 4 spots, then rub each with a cotton ball soaked in a solvent, 4–5 passes, using a new spot each time. If denatured alcohol softens it, it's water-based acrylic. If xylene softens it, it's rubber or chlorinated rubber. If MEK softens it, it's epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eRubber Based or Waterborne?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBoth can recoat a rubber pool. Rubber Based is the like-for-like recoat, with a satin finish and the most coverage per gallon. \u003ca href=\"\/fr\/products\/insl-x-waterborne-swimming-pool-paint\"\u003eINSL-X Waterborne\u003c\/a\u003e recoats faster, cleans up with water and goes over most pool coatings, so it's the safer pick if you're not sure what's there.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long between coats?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003e12–24 hours. If more than 72 hours pass, sand with 150–180 grit before the second coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long before I can fill the pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWait at least 7 days after the final coat for an outdoor pool, or 14 days indoors. Run fans across the pool and one pointed down into the deep end, and never cover it with a tarp or solar blanket while it cures. If rain gets in before it's cured, pump it out as soon as you can.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs it OK for saltwater and chlorinated pools?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's made for fresh water, salt water and chlorinated pools, residential or commercial.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long will a painted pool last?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore says to expect about 3 to 5 years before repainting. Chlorine levels, sun, climate, how many coats went on and how much the pool gets used all play a part. Check the finish each fall when you close the pool, and add shock through the skimmer or a chlorinator so concentrated chlorine never sits on the paint.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"3,79 L \/ Blanc","offer_id":39357549641783,"sku":"RP271092F-01","price":135.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Satin \/ Aigue-marine","offer_id":39357549674551,"sku":"RP271992F-01","price":135.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Satin \/ Noir","offer_id":39357549707319,"sku":"RP272092F-01","price":135.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Satin \/ Bleu océan","offer_id":39357549740087,"sku":"RP272392F-01","price":135.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Satin \/ Bleu royal","offer_id":39357549772855,"sku":"RP272492F-01","price":135.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/INSL-X-Rubber-Based-Swimming-Pool-Paint-RP27-XX-Satin-Finish-3_79L.png?v=1681867308"},{"product_id":"insl-x-epoxy-swimming-pool-paint","title":"INSL-X Epoxy Swimming Pool Paint, 2-Gallon Kit","description":"\u003ch2\u003eINSL-X Epoxy Swimming Pool Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Epoxy Pool Coating (IG-4000)\u003c\/strong\u003e is a \u003cstrong\u003etwo-part polyamide epoxy pool paint\u003c\/strong\u003e with a semi-gloss finish. It's extremely durable in fresh and salt water and resists common pool chemicals, including chlorine. It goes on concrete, plaster, marcite, gunite, fibreglass and steel, or over an existing 2-part epoxy. Each 2-gallon kit is Part A and Part B, mixed 1:1.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe toughest INSL-X pool paint,\u003c\/strong\u003e with the most chemical resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFibreglass and steel\u003c\/strong\u003e as well as concrete and plaster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide recoat window\u003c\/strong\u003e of 3–72 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh or salt water,\u003c\/strong\u003e and resists chlorine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-gallon kits,\u003c\/strong\u003e 700–800 sq ft per coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eConcrete, plaster, marcite, gunite, fibreglass and steel pools, bare or previously coated with a 2-part epoxy. \u003cem\u003eNot over rubber, chlorinated rubber or water-based pool paint (use \u003ca href=\"\/fr\/products\/insl-x-rubber-based-swimming-pool-paint-rp-satin-finish-3-79l\"\u003eINSL-X Rubber Based\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/insl-x-waterborne-swimming-pool-paint\"\u003eINSL-X Waterborne\u003c\/a\u003e). Not for stainless steel, aluminum, galvanized or vinyl-lined pools, hot tubs or spas.\u003c\/em\u003e Like any epoxy, it chalks and fades over time in sunlight.\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eReady-mixed in White, Black, Ocean Blue and Royal Blue, in 2-gallon kits (Part A and Part B).\u003c\/p\u003e\n\u003ch3\u003eWhich INSL-X Pool Paint?\u003c\/h3\u003e\n\u003cp\u003eChoose Epoxy for an epoxy-painted pool, for fibreglass or steel, or for the most chemical resistance. For a rubber pool, use \u003ca href=\"\/fr\/products\/insl-x-rubber-based-swimming-pool-paint-rp-satin-finish-3-79l\"\u003eINSL-X Rubber Based\u003c\/a\u003e. Not sure what's there? \u003ca href=\"\/fr\/products\/insl-x-waterborne-swimming-pool-paint\"\u003eINSL-X Waterborne\u003c\/a\u003e goes over most coatings.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 350–400 sq ft per gallon per coat, or 700–800 per 2-gal kit. Plan on 250–300 per gallon for the first coat on bare plaster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 thin coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-part polyamide epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSemi-gloss, 40–50 @ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePot life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 h at 25 °C, 3 h at 32 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 2 h. Recoat 3–72 h. Sand with 150–180 grit after 72 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFill\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 days outdoors, 14 days indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–38 °C (50–100 °F), air, surface and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 340 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXylene or epoxy thinner, then warm soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm it's epoxy\u003c\/strong\u003e with an MEK test, then drain and clean with a citrus degreaser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare plaster:\u003c\/strong\u003e etch, neutralize, rinse three times and dry 3 days. \u003cstrong\u003eEpoxy or fibreglass:\u003c\/strong\u003e sand, rinse and dry 24 hours. \u003cstrong\u003eSteel:\u003c\/strong\u003e remove rust and prime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix 1:1,\u003c\/strong\u003e wait 30 minutes, then roll two thin coats 3–72 hours apart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure 7 days\u003c\/strong\u003e outdoors or 14 indoors with fans running, then fill.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow many kits do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. A 16 × 32 ft pool, 3½ ft at the shallow end and 8 ft at the deep end, has about 1,064 sq ft of walls and floor. Two coats at 350 sq ft per gallon is just over 6 gallons, so plan on 4 kits. Bare plaster also comes to 4 kits.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat can it go over?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOnly bare surfaces or an existing 2-part epoxy: concrete, plaster, marcite, gunite, fibreglass and steel. It doesn't go over rubber, chlorinated rubber or water-based pool paint. If there are 4 or more old layers, strip it back first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I tell what paint is on my pool now?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eDo a solvent test. Wearing rubber gloves, clean and dry 3 or 4 spots, then rub each with a cotton ball soaked in a solvent, 4–5 passes, using a new spot each time. If denatured alcohol softens it, it's water-based acrylic. If xylene softens it, it's rubber or chlorinated rubber. If MEK softens it, it's epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on a fibreglass or steel pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's the INSL-X pool paint for both. Scuff sand fibreglass with 150–180 grit. On steel, remove the rust and prime with an epoxy primer first. It's not for stainless steel, aluminum or galvanized pools, vinyl liners, hot tubs or spas.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I mix it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eStir Part A and Part B separately, then combine them 1:1 by volume and mix well. Let it stand 30 minutes before you start. It stays usable for about 6 hours at 25 °C, or 3 hours at 32 °C, so only mix what you can roll in that time. Never mix part of a kit.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long between coats?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003e3–72 hours. If more than 72 hours pass, sand with 150–180 grit before the second coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long before I can fill the pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWait at least 7 days after the final coat for an outdoor pool, or 14 days indoors. Run fans across the pool and one pointed down into the deep end, and never cover it with a tarp or solar blanket while it cures. If rain gets in before it's cured, pump it out as soon as you can.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long will a painted pool last?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore says to expect about 3 to 5 years before repainting. Chlorine levels, sun, climate, how many coats went on and how much the pool gets used all play a part. Check the finish each fall when you close the pool, and add shock through the skimmer or a chlorinator so concentrated chlorine never sits on the paint.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"2 Gal Kit \/ Blanc","offer_id":39364010541111,"sku":"IG4010S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true},{"title":"2 Gal Kit \/ Noir","offer_id":39364010606647,"sku":"IG4020S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true},{"title":"2 Gal Kit \/ Bleu océan","offer_id":39364010639415,"sku":"IG4042S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true},{"title":"2 Gal Kit \/ Bleu royal","offer_id":39364010672183,"sku":"IG4024S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/INSL-X-Epoxy-Swimming-Pool-Paint-IG-Semi-Gloss-Finish-2-Gal-Kit.png?v=1681867319"},{"product_id":"insl-x-sure-step-anti-slip-paint","title":"INSL-X Sure Step Acrylic Anti-Slip Paint","description":"\u003ch2\u003eINSL-X Sure Step Acrylic Anti-Slip Coating\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Sure Step\u003c\/strong\u003e is a 100% acrylic, \u003cstrong\u003etextured anti-slip coating\u003c\/strong\u003e for interior and exterior walking surfaces. An aggregate mixed into the paint gives a skid-resistant finish for \u003cstrong\u003esteps, patios, walkways, pool decks and tennis courts\u003c\/strong\u003e. It resists abrasion, fading and ponding water, fills and seals minor cracks, and cleans up with soap and water.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTextured, skid-resistant finish\u003c\/strong\u003e with the grit built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete, asphalt, wood and metal,\u003c\/strong\u003e inside or out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e on bare concrete, bare asphalt and sound paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResists ponding water,\u003c\/strong\u003e abrasion and fading.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLight foot traffic in 24 hours.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnder 50 g\/L VOC.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eSteps, patios, walkways, pool decks, tennis courts and other foot-traffic areas. \u003cem\u003eFoot traffic only: not for garage floors or driveways (use \u003ca href=\"\/fr\/products\/insl-x-garageguard-1-part-concrete-garage-floor-paint\"\u003eGarageGuard 1-Part\u003c\/a\u003e). Not for immersion. Apply at 10–32 °C, with no rain threatening.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eReady-mixed in Knight Gray, Welded Gray, Desert Sand, Tile Red, Pine Green, Saddle Brown, Light Gray, Gray Pearl and White, in 3.79 L cans.\u003c\/p\u003e\n\u003ch3\u003eSure Step or GarageGuard?\u003c\/h3\u003e\n\u003cp\u003eChoose Sure Step where people walk and you want grip. Choose GarageGuard where cars drive: it resists hot tire pickup but isn't slip-resistant.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 80–120 sq ft per 3.79 L per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2, required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100% acrylic anti-slip coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat, textured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 1–2 h. Recoat 8 h. Light foot traffic 24 h. Heavy foot traffic 4–5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e½–¾ in roller, brush or squeegee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrimer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrime bare wood and bare metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 50 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarm soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and degrease.\u003c\/strong\u003e Etch bare concrete to a fine-sandpaper feel. Scrape loose paint and dull gloss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime\u003c\/strong\u003e bare wood and bare metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir well,\u003c\/strong\u003e then roll in 5 × 7 ft sections, cross-roll and finish with a light stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecond coat\u003c\/strong\u003e after 8 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalk on it\u003c\/strong\u003e after 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much Sure Step do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eSure Step goes on thick to build its texture, so one 3.79 L covers only 80–120 sq ft per coat, and it needs two coats. A 12 × 16 ft patio is 192 sq ft, or about 384 sq ft for two coats, so plan on 5 cans. Four steps 4 ft wide take about 1 can.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs Sure Step slip-resistant when wet?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eIt's made for areas that need extra skid resistance. An aggregate in the paint gives it a textured finish, and it resists ponding water. Any surface can still be slippery when wet or icy, so keep it clear of water, snow and ice.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on a pool deck?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Pool decks are on Benjamin Moore's list, along with patios, walkways, steps and tennis courts. It's not for immersion, so don't use it inside the pool.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on my garage floor or driveway?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. Sure Step is for foot traffic only. For floors you drive on, use \u003ca href=\"\/fr\/products\/insl-x-garageguard-1-part-concrete-garage-floor-paint\"\u003eGarageGuard 1-Part\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need a primer?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNot on bare concrete, bare asphalt or sound painted surfaces, where it's self-priming. Prime bare wood with an acrylic or oil-based primer, and bare metal with an acrylic metal primer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on wood steps or a deck?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Power wash, let the wood dry thoroughly and prime bare wood first. Previously painted wood just needs a wash, scrape and rinse.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I apply it in the fall?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOnly when the air and the surface are 10 °C or warmer, rain isn't threatening, and you're not within 5° of the dew point. Paint early in the day so it isn't wet when evening dew forms. Cool, damp weather stretches every drying time.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhen can I walk on it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eAllow 8 hours between coats, light foot traffic 24 hours after the second coat, and heavy foot traffic after 4–5 days.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e9\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo you ship, or can I pick up?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWe ship across Canada, free on most orders over $249. Pick-up is free at our Rockwood Village store, 1292 Eglinton Ave. E, Mississauga, and most orders are ready within 4 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"3,79 L \/ Blanc","offer_id":40044500090935,"sku":"SU011092F-01","price":79.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Gris clair","offer_id":40044507594807,"sku":"SU031092F-01","price":79.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Tuile Rouge","offer_id":40044507627575,"sku":"SU050592F-01","price":79.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Vert pin","offer_id":40044507660343,"sku":"SU078992F-01","price":79.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Marron Selle","offer_id":40044508184631,"sku":"SU099892F-01","price":79.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Perle grise","offer_id":40044508217399,"sku":"SU030892F-01","price":79.99,"currency_code":"CAD","in_stock":false},{"title":"3,79 L \/ Sable du désert","offer_id":40044508250167,"sku":"NSU102209F-01","price":79.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Knight Gray","offer_id":41847432052791,"sku":"NSU100709F-01","price":79.99,"currency_code":"CAD","in_stock":true},{"title":"3,79 L \/ Welded Gray","offer_id":41847432577079,"sku":"NSU101109F-01","price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/SureStepGallon1080x1080.jpg?v=1710274494"},{"product_id":"insl-x-decorative-floor-flakes","title":"INSL-X Flocons de sol décoratifs","description":"\u003ch2\u003eRevitalisez vos sols : Ajoutez de la couleur et du style avec les flocons décoratifs INSL-X !\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eTransformez n'importe quelle surface en béton en une belle surface avec des flocons de peinture décoratifs pour les sols de garage, les sols de salle d'exposition, les allées, les patios, les sols de buanderie, les terrasses de piscine, les sous-sols et plus encore. Les flocons de sol décoratifs INSL-X sont fabriqués à partir de matériaux en résine à base d'eau, de minéraux inorganiques, d'additifs et de divers pigments. Le produit de flocons de sol est pigmenté de manière intégrale, avec des flocons de couleur brillante pour la peinture ; de forme aléatoire, de taille standardisée et mélangés sur mesure avec des options infinies pour obtenir des qualités d'apparence et de texture optimales dans une large variété de flocons de sol colorés pour les sols de garage de n'importe quelle couleur de revêtement.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eCaractéristiques clés \u003c\/span\u003e\u003c\/h2\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli\u003eTransformez n'importe quel sol en béton en une surface époustouflante avec les flocons décoratifs INSL-X pour les sols de garage.\u003c\/li\u003e\n\u003cli\u003eAmical pour l'utilisateur et dissimule efficacement les imperfections de surface.\u003c\/li\u003e\n\u003cli\u003eDisponible en sept combinaisons de couleurs distinctes, parfaites pour les sols de garage résidentiels et commerciaux.\u003c\/li\u003e\n\u003cli\u003eConvient pour une utilisation intérieure et extérieure, avec des pigments résistants à la décoloration et stables aux UV.\u003c\/li\u003e\n\u003cli\u003eLa couverture varie de 20 à 150 pieds carrés, en fonction de la densité d'application.\u003c\/li\u003e\n\u003cli\u003eraison du processus de fabrication, la forme des flocons de sol décoratifs varie de manière aléatoire.\u003c\/li\u003e\n\u003cli\u003eChaque conteneur contient une petite quantité de particules plus fines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUtilisations idéales pour les flocons de sol décoratifs INSL-X :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouverture légère :\u003c\/strong\u003e Utilisez environ 1 livre par pied carré.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouverture Moyenne :\u003c\/strong\u003e Utilisez environ 2 livres par pied carré.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouverture Élevée :\u003c\/strong\u003e Utilisez environ 3 à 4 livres par pied carré.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCouverture Complète :\u003c\/strong\u003e Utilisez environ 5 livres par pied carré.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INSL-X","offers":[{"title":"12oz \/ Mélange Gris","offer_id":41283048702007,"sku":"EGF90009F-EA","price":19.97,"currency_code":"CAD","in_stock":true},{"title":"12oz \/ Mélange Rouge","offer_id":41283048734775,"sku":"EGF70009F-EA","price":19.97,"currency_code":"CAD","in_stock":true},{"title":"12oz \/ Mélange Bleu","offer_id":41283048767543,"sku":"EGF60109F-EA","price":19.97,"currency_code":"CAD","in_stock":true},{"title":"12oz \/ Mélange Marron","offer_id":41283048800311,"sku":"EGF80009F-EA","price":19.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/INSL-XDecorativeFloorFlakes_GrayBlend1080x1080.jpg?v=1727222503"},{"product_id":"inslx-prime-lock-plus-primer-sealer","title":"INSL-X Prime Lock® Plus Apprêt\/Scellant","description":"\u003ch2\u003eINSL-X Prime Lock Plus Alkyd Primer Sealer\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Prime Lock Plus\u003c\/strong\u003e is a high-hiding, \u003cstrong\u003estain-blocking alkyd primer sealer\u003c\/strong\u003e for interior and exterior surfaces. Its penetrating oil-based formula \u003cstrong\u003elocks in water, tannin, smoke and fire stains\u003c\/strong\u003e, plus household marks, graffiti, crayon, lipstick and fingerprints. It works under oil or latex paint and covers 550–650 sq ft per 3.79 L.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlocks tough stains,\u003c\/strong\u003e including water, smoke, fire and tannin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStops tannin bleed\u003c\/strong\u003e on cedar and redwood.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMade for water-damaged surfaces.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh coverage:\u003c\/strong\u003e 550–650 sq ft per 3.79 L.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorks down to 7.2 °C.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnder 100 g\/L VOC.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eDrywall, plaster, wood, cedar and redwood, and previously painted or varnished surfaces, inside or out. Also a wallpaper primer for easy hanging and removal. \u003cem\u003eNot for walking surfaces. Dull glossy areas first. Not listed for Formica, tile or PVC: use \u003ca href=\"\/fr\/products\/insl-x-stix-waterborne-bonding-primer\"\u003eStix\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/aqua-lock-plus-primer-sealer\"\u003eAqua Lock Plus\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColour and Sizes\u003c\/h3\u003e\n\u003cp\u003eWhite, in 946 mL and 3.79 L. White tints with up to 2 oz of colorant.\u003c\/p\u003e\n\u003ch3\u003ePrime Lock Plus or Aqua Lock Plus?\u003c\/h3\u003e\n\u003cp\u003eChoose Prime Lock Plus for heavy water, smoke and fire stains, tannin bleed and cooler weather. \u003ca href=\"\/fr\/products\/aqua-lock-plus-primer-sealer\"\u003eAqua Lock Plus\u003c\/a\u003e is water-based, recoats in 1 hour, cleans up with soap and water and comes in black.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e946 mL:\u003c\/strong\u003e about 135–160 sq ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.79 L:\u003c\/strong\u003e 550–650 sq ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAlkyd primer sealer, flat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 1–2 h. Recoat 3–4 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.2–32 °C, not within 5° of the dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBrush, roller, pad, or airless spray (1,500–2,500 psi, 0.013–0.017 tip)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDo not thin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 100 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMineral spirits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e off dirt, grease, wax and mildew, and remove loose paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDull glossy areas\u003c\/strong\u003e and remove sanding dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply one coat.\u003c\/strong\u003e Severe stains may need two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat after 3–4 hours\u003c\/strong\u003e with latex or oil.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much Prime Lock Plus do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOne 3.79 L covers 550–650 sq ft. A 12 × 12 ft room with 8 ft ceilings has about 350 sq ft of wall after doors and windows, so one can primes the walls with room to spare. Severe stains may need a second coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat stains does Prime Lock Plus block?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore lists water, tannin, smoke, fire, household marks, graffiti, crayon, lipstick and fingerprints. Clean the area first. Difficult stains may need two coats.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWill it stop cedar from bleeding through my paint?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's listed for cedar and redwood to prevent tannin bleed. Let the wood dry thoroughly, and sand smooth planed siding to break the mill glaze first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I paint latex over it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It works under both oil and latex topcoats. It's dry to the touch in 1–2 hours and ready to recoat in 3–4 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it over glossy paint or varnish?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, on previously painted or varnished surfaces. Dull glossy areas with a light sanding first. For Formica, tile and PVC, use \u003ca href=\"\/fr\/products\/insl-x-stix-waterborne-bonding-primer\"\u003eStix\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it outside?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, on interior and exterior surfaces. It isn't for walking surfaces such as decks and floors.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow late in the season can I use it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThe surface, the air and the primer need to be 7.2 °C or warmer, and you shouldn't paint within 5° of the dew point. That gives you a longer fall season than most water-based primers. Cool, damp weather slows drying.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDoes it seal knots?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eKnots aren't on the data sheet. It's listed for tannin bleed from cedar and redwood. For heavily knotted pine, ask our team what to use.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e9\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003ePrime Lock Plus or Aqua Lock Plus?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBoth block water, smoke, tannin and crayon stains. Prime Lock Plus is oil-based, covers 550–650 sq ft per can and works down to 7 °C, but needs mineral spirits for clean-up. \u003ca href=\"\/fr\/products\/aqua-lock-plus-primer-sealer\"\u003eAqua Lock Plus\u003c\/a\u003e is water-based, recoats in 1 hour and also bonds to Formica, tile, PVC and galvanized metal.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e10\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo you ship, or can I pick up?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWe ship across Canada, free on most orders over $249. Pick-up is free at our Rockwood Village store, 1292 Eglinton Ave. E, Mississauga, and most orders are ready within 4 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"946ml","offer_id":40123052425271,"sku":"PS810009F-04","price":19.97,"currency_code":"CAD","in_stock":true},{"title":"3,79 L","offer_id":40123052392503,"sku":"PS810009F-01","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/ExtPrimerPS-8000.png?v=1678912058"},{"product_id":"insl-x-garageguard-1-part-concrete-garage-floor-paint","title":"INSL-X GarageGuard 1-Part Concrete \u0026 Garage Floor Paint","description":"\u003ch2\u003eINSL-X GarageGuard 1-Part Concrete \u0026amp; Garage Floor Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X GarageGuard 1-Part\u003c\/strong\u003e is a ready-to-use, \u003cstrong\u003eepoxy-modified acrylic floor paint\u003c\/strong\u003e for garage floors, basements, driveways, patios and walkways. There's nothing to mix. It's self-priming, resists \u003cstrong\u003ehot tire pickup\u003c\/strong\u003e, and seals concrete against water, oil, gasoline, grease and household cleaners.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-part, no mixing.\u003c\/strong\u003e Use it straight from the can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResists hot tire pickup\u003c\/strong\u003e once it has hardened.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-priming\u003c\/strong\u003e on bare concrete and on properly prepared painted floors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistant:\u003c\/strong\u003e water, oil, gasoline, grease and household cleaners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast return to service:\u003c\/strong\u003e recoat in 4 hours, light foot traffic in 8 hours, vehicles in 3–5 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior and exterior,\u003c\/strong\u003e with soap-and-water clean-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eGarage and basement floors, driveways, walkways, patios and pavers, plus masonry, block and brick. \u003cem\u003eNot slip-resistant: add an anti-slip aggregate on steps and ramps, or use \u003ca href=\"\/fr\/products\/insl-x-sure-step-anti-slip-paint\"\u003eSure Step\u003c\/a\u003e. Apply at 10 °C or warmer, out of direct sun, with no rain for 12 hours.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eReady-mixed in \u003cstrong\u003eKnight Grey, Welded Grey and Desert Sand\u003c\/strong\u003e, satin finish, in 3.79 L cans. A typical 2-car garage takes 3 cans for two coats.\u003c\/p\u003e\n\u003ch3\u003e1-Part or Epoxy?\u003c\/h3\u003e\n\u003cp\u003eChoose GarageGuard 1-Part for an easy weekend floor inside or out. For an indoor garage or workshop that takes heavy wear, \u003ca href=\"\/fr\/products\/benjamin-moore-garage-guard-epoxy-floor-paint\"\u003eGarageGuard Epoxy\u003c\/a\u003e is a 2-part waterborne epoxy with a semi-gloss finish. It's for interior floors only.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 350–450 sq ft per 3.79 L per coat (32.5–41.8 m²)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEpoxy-modified acrylic, 1-part, waterborne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSatin, 15–30 @ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 50 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 1–2 h. Recoat 4 h. Light foot traffic 8 h. Vehicles 3–5 days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–32 °C (50–90 °F), air and surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNylon\/polyester brush or professional roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThinning\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFirst coat on bare concrete: 1 pint of water per gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWarm soapy water. Final mineral spirits rinse for spray equipment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean and degrease\u003c\/strong\u003e the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoughen bare concrete\u003c\/strong\u003e by grinding or acid-etching until it feels like 80-grit sandpaper. On painted floors, scrape and sand instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry 24–48 hours\u003c\/strong\u003e and check for moisture with a taped plastic sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirst coat,\u003c\/strong\u003e thinned on bare concrete. \u003cstrong\u003eSecond coat\u003c\/strong\u003e 4 hours later, at a right angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalk on it after 8 hours\u003c\/strong\u003e and park after 3–5 days.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much GarageGuard do I need for a 2-car garage?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eA 2-car garage is about 22 × 22 ft, or 484 sq ft. Two coats means about 970 sq ft to cover. At 350–450 sq ft per 3.79 L, that's 3 cans. Rough or porous concrete drinks more, so plan on the low end.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs GarageGuard 1-Part a real epoxy?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eIt's an epoxy-modified acrylic. You get some of the toughness of epoxy in a 1-part paint you use straight from the can, with no mixing. For a true 2-part epoxy on an indoor floor, see \u003ca href=\"\/fr\/products\/benjamin-moore-garage-guard-epoxy-floor-paint\"\u003eGarageGuard Epoxy\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWill hot tires lift the paint?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eGarageGuard resists hot tire pickup once it has hardened. Wait 3–5 days before you park on it, and longer when the weather is cool or damp.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need a primer?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. It's self-priming. On bare concrete, thin the first coat with 1 pint of water per gallon so it soaks in and primes the slab, then apply a full second coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need to etch or grind the concrete?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBare concrete has to be roughened so the paint can grip. Grinding works best. If you can't grind, acid-etch following the label and neutralize. The floor should feel like 80-grit sandpaper. Never etch a floor that's already painted.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I paint over my old floor paint?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, if it's sound. Clean and degrease, scrape loose paint, feather-sand the edges and dull any gloss. GarageGuard is self-priming over prepared paint. If the old coating is peeling over a large area, remove it first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I paint my garage floor in the fall?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes, as long as the air and the floor stay between 10 °C and 32 °C and you're not within 5° of the dew point. In Ontario, pick a dry, mild stretch or heat the garage. Cool, damp weather stretches drying and parking times.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on a driveway, patio or walkway?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's made for interior and exterior concrete, pavers, masonry, block and brick. Don't paint in direct sun or if rain is expected within 12 hours. The satin finish isn't slip-resistant, so add an anti-slip aggregate on steps and ramps, or use \u003ca href=\"\/fr\/products\/insl-x-sure-step-anti-slip-paint\"\u003eSure Step\u003c\/a\u003e.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e9\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo you ship, or can I pick up?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWe ship across Canada, free on most orders over $249. Pick-up is free at our Rockwood Village store, 1292 Eglinton Ave. E, Mississauga, and most orders are ready within 4 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"3.79L \/ Satin \/ Welded Grey","offer_id":42203275427895,"sku":"CG301B09F-01","price":74.99,"currency_code":"CAD","in_stock":true},{"title":"3.79L \/ Satin \/ Knight Grey","offer_id":42203284308023,"sku":"CG300709F","price":74.99,"currency_code":"CAD","in_stock":true},{"title":"3.79L \/ Satin \/ Desert Sand","offer_id":42203284340791,"sku":"CG302209F","price":74.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/insl-x-garageguard-1-part-concrete-garage-floor-paint-satin.jpg?v=1761870689"},{"product_id":"insl-x-multi-surface-waterproofer","title":"INSL-X Multi-Surface Waterproofer, Clear Siloxane Water Repellent","description":"\u003ch2\u003eINSL-X Multi-Surface Waterproofer, Clear Siloxane Water Repellent\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Multi-Surface Waterproofer\u003c\/strong\u003e is a \u003cstrong\u003eclear, penetrating siloxane water repellent\u003c\/strong\u003e for \u003cstrong\u003ebrick, stucco, concrete, masonry and bare wood\u003c\/strong\u003e, inside or out. It soaks in and dries clear, so the surface looks exactly the same, while rain beads off. It's vapour permeable, so the wall can still breathe.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDries clear\u003c\/strong\u003e with no visible change to colour or texture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePenetrating siloxane\u003c\/strong\u003e formula that seals and protects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreathable:\u003c\/strong\u003e 48 perms water vapour permeance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne coat,\u003c\/strong\u003e ready for use in 12 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplies down to 4.4 °C,\u003c\/strong\u003e with soap-and-water clean-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eNew or reconditioned concrete, brick, stucco, masonry and bare wood: foundations, walkways, porches, steps, patios and fences. \u003cem\u003eNot for painted or stained surfaces, immersion or areas where water pools. To colour and seal concrete, use \u003ca href=\"\/fr\/products\/tuffcrete-waterborne-acrylic-concrete-stain\"\u003eTuffCrete\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColour and Size\u003c\/h3\u003e\n\u003cp\u003eClear, flat finish, in 3.79 L.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCement block\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50–100 sq ft per 3.79 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePoured concrete\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–200 sq ft per 3.79 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStucco\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–200 sq ft per 3.79 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWood\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 300 sq ft per 3.79 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time (25 °C, 50% RH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 2–3 h. Ready for use 12 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.4–32 °C, not within 5° of the dew point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePump sprayer or low-pressure airless, backroll drips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 100 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e off dirt, chalk, mildew and grease, then let it dry. Let new concrete cure 30 days.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir well.\u003c\/strong\u003e Don't thin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray from the top down\u003c\/strong\u003e in overlapping passes, without misting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackroll drips\u003c\/strong\u003e and brush out puddles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplash-test once a year\u003c\/strong\u003e and add a coat if water soaks in.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much Multi-Surface Waterproofer do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. Each 3.79 L covers 50–100 sq ft of cement block, 100–200 sq ft of poured concrete or stucco, and up to 300 sq ft of wood. A 4 × 30 ft concrete walkway is 120 sq ft, so plan on 2 cans.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWill it change how the surface looks?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. It soaks in and dries clear and flat, with no visible change to the colour or texture of the brick, stone, concrete or wood.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDoes it let the wall breathe?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's vapour permeable, rated at 48 perms, so moisture inside the wall can still escape while rain beads off the outside.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it over paint or stain?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. It needs to soak into bare masonry or wood. Benjamin Moore doesn't recommend it for surfaces that are already painted or stained.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I know when to reapply?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eDo a splash test once a year. Throw some water on the surface. If it soaks in quickly instead of beading up, apply another coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on a leaking basement wall?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eIt isn't made for immersion or areas where water pools. If water is coming through a wall, find and fix the source first, then ask our team what to use.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow cold can it be when I apply it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThe surface and the air need to be between 4.4 °C and 32 °C, which gives you a longer season than most coatings. Don't apply when rain is on the way, late in the day when dew can form, or within 5° of the dew point.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWaterproofer or TuffCrete?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eChoose Multi-Surface Waterproofer when you want the surface to look exactly the same. Choose \u003ca href=\"\/fr\/products\/tuffcrete-waterborne-acrylic-concrete-stain\"\u003eTuffCrete\u003c\/a\u003e when you want to colour and seal concrete at the same time.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"3.79L \/ Flat \/ Clear","offer_id":42202074611767,"sku":"WPS100009F","price":35.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/multi-surface-waterproofer-for-stucco-brick-masonry-wood-concrete-clear_eb5ecf29-d920-4496-a3a2-f67f2781ce23.jpg?v=1777406265"}],"url":"https:\/\/thepaintpeople.com\/fr\/collections\/insl-x-apprets-et-peintures-specialisees.oembed","provider":"The Paint People","version":"1.0","type":"link"}