{"title":"Envirolak Water-Based Coatings \u0026 Finishing Systems","description":"\u003cp\u003eShop \u003cstrong\u003eEnvirolak\u003c\/strong\u003e water-based wood primers, topcoats and hardeners for cabinets, furniture, millwork and wood floors. Pick a primer and topcoat by the job below, then add a hardener if you need extra durability.\u003c\/p\u003e\n\u003ch2\u003eWhich Envirolak product is right for you?\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour project\/need\u003c\/th\u003e\n\u003cth\u003eBest choice\u003c\/th\u003e\n\u003cth\u003eWhy\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRefinishing over an existing finish, or blocking stains\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirolak-t9000-stain-blocking-and-bonding-primer-white-elprt9000\"\u003eT9000 Stain Blocking and Bonding Primer\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e1K primer for refinishing and new construction. VOC 13 g\/L. Do not put 100 series topcoats directly over it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTannin-rich wood, 1K white primer\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirocryl-160-tb-tannin-blocking-white-primer\"\u003eEnvirocryl 160-TB\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eTannin blocking primer for solid wood, veneer and MDF. Dries to sand in about 50 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhite primer with high fill, 1K or 2K\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirolak-envirothane-170-170tb-high-solids-primer\"\u003eEnvirothane 170 \/ 170-TB\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e70% solids urethane primer for MDF, veneer and solid wood. The TB version adds tannin blocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDark or black solid colours\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirothane-180-neutral-high-solids-primer\"\u003eEnvirothane 180 Neutral Primer\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eNeutral 66% solids primer made for tinting to dark colours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhite or pastel cabinets, 1K or 2K\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirothane-200-warm-white-topcoat-elnyw200-xx-1-gal-3-79l\"\u003eEnvirothane 200\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite urethane topcoat that can be tinted to off-white or pastel colours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFast-drying white acrylic topcoat\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/fr\/products\/envirocryl-400-white-topcoat-elacw400xx\"\u003eEnvirocryl 400\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/envirolak-800-white-topcoat-elnyw800xx\"\u003eEnvirothane 800\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1K spray topcoats for cabinetry and millwork. The 800 is spray only and not for isocyanate hardeners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarm clear topcoat for tables, cabinets and furniture\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirolak-envirothane-100\"\u003eEnvirothane 100\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eWarm clear self-seal urethane. Use over raw wood, stains or 170, 170-TB and 180 primers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater-white clear topcoat\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirocryl-500-clear-topcoat\"\u003eEnvirocryl 500\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eClear acrylic urethane topcoat for cabinetry, furniture and millwork\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterior wood floors and stairs\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/fr\/products\/envirothane-125-low-slip-clear-self-seal-topcoat\"\u003eEnvirothane 125 Low Slip\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLow-slip clear urethane for interior flooring and stairs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore hardness and chemical resistance\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/fr\/products\/envirocat-100-lv-water-based-hardener\"\u003eEnviroCat 100-LV\u003c\/a\u003e or \u003ca href=\"\/fr\/products\/envirocat-150-crosslinker\"\u003eEnviroCat 150\u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003eIsocyanate hardener (100-LV) or crosslinker (150, industrial use) mixed into the coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePrep\/accessories:\u003c\/strong\u003e these are professional coatings. Always check the product's technical data sheet for mix ratios, minimum temperature and which primer goes under which topcoat.\u003c\/p\u003e\n\u003cp\u003eNot sure which primer or topcoat you need? \u003ca href=\"\/fr\/pages\/contact-page\"\u003eContact us\u003c\/a\u003e with your substrate and finish and we'll help you choose.\u003c\/p\u003e\n","products":[{"product_id":"envirolak-t9000-stain-blocking-and-bonding-primer-white-elprt9000","title":"Envirolak T9000 Primaire Bloquant de Taches et d'Adhésion","description":"\u003ch2\u003e1K Water-Based Primer for Stain Blocking, Tannin Blocking \u0026amp; Adhesion\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEnvirolak T9000 Universal Stain \u0026amp; Tannin Blocking Primer (ELPRT9000)\u003c\/strong\u003e is a professional one-component water-based primer engineered for refinishing and new construction.\u003c\/p\u003e\n\u003cp\u003eUpdated with Envirolak's \u003cstrong\u003e2026 formula\u003c\/strong\u003e, T9000 provides industry-leading stain, dye and tannin blocking along with higher build, improved adhesion and improved moisture resistance. It sands easily, dries quickly and can be used under all Envirolak topcoats, including the \u003cstrong\u003e100 Series\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eT9000 bonds to a wide variety of substrates, including existing solvent- and water-based coatings, veneers, solid wood, MDF, plastics, concrete and stone.\u003c\/p\u003e\n\u003cp\u003eFor darker finishes, white T9000 can also be tinted with \u003cstrong\u003eT900BT Black Tinter\u003c\/strong\u003e to produce a dark grey primer.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose Envirolak T9000?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProfessional 1K universal primer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExcellent stain, dye and tannin blocking\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUpdated \u003cstrong\u003e2026 formula\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigher-build formulation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImproved adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImproved moisture resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExcellent sanding characteristics\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFast drying\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan be force dried for faster production\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExcellent adhesion over existing solvent- and water-based finishes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBonds to wood, veneer, MDF, plastics, concrete and stone\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible with all Envirolak topcoats, including the 100 Series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCan be tinted dark grey with T900BT Black Tinter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVery low VOC at approximately \u003cstrong\u003e13 g\/L\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo catalyst required\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNo pot life\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for spray, brush and roller application\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended Uses\u003c\/h2\u003e\n\u003cp\u003eEnvirolak T9000 is designed for professional interior finishing and refinishing applications such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eKitchen cabinetry\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCabinet doors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFurniture\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMillwork\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWoodwork\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVeneers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMDF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSolid wood\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePreviously finished surfaces\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlastics\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConcrete\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStone\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is particularly useful when a project requires both \u003cstrong\u003estrong adhesion and stain or tannin blocking\u003c\/strong\u003e before application of a pigmented Envirolak topcoat.\u003c\/p\u003e\n\u003ch2\u003eExcellent Stain \u0026amp; Tannin Blocking\u003c\/h2\u003e\n\u003cp\u003eT9000 is formulated to help block:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWood tannins\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExisting stains\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDye migration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDiscolouration from underlying substrates\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis makes it particularly useful for cabinetry and millwork where tannin or stain bleed could otherwise discolour a light-coloured topcoat.\u003c\/p\u003e\n\u003ch2\u003eExcellent Bonding to Existing Finishes\u003c\/h2\u003e\n\u003cp\u003eT9000 can bond to a wide range of properly prepared existing \u003cstrong\u003ewater-based and solvent-based coatings\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThis makes it well suited to refinishing cabinetry, furniture and millwork where complete removal of a sound existing finish may not be necessary.\u003c\/p\u003e\n\u003cp\u003eExisting surfaces must still be thoroughly cleaned, degreased and sanded before priming.\u003c\/p\u003e\n\u003ch2\u003e2026 Formula\u003c\/h2\u003e\n\u003cp\u003eEnvirolak's updated T9000 formulation provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eHigher build\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBetter adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBetter moisture resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEasy sanding\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFast force-drying capability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatibility with all Envirolak topcoats, including the 100 Series\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSurface Preparation\u003c\/h5\u003e\n\u003ch3\u003eRaw Wood, Veneer \u0026amp; MDF\u003c\/h3\u003e\n\u003cp\u003eSand the substrate with:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e180–320 grit sandpaper\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ebefore applying T9000.\u003c\/p\u003e\n\u003cp\u003eAfter the primer has dried, lightly sand with:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e320 grit sandpaper or a fine sanding sponge\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ebefore applying the next layer for the best appearance.\u003c\/p\u003e\n\u003cp\u003eA second coat of T9000 can be applied over the first coat \u003cstrong\u003ewithout sanding when applied within 4 hours\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreviously Finished Surfaces\u003c\/h3\u003e\n\u003cp\u003eFor refinishing over an existing finish:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eDegrease the surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMix \u003cstrong\u003e1 part Envirolak RX110 EnviroKlean with 4 parts water\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApply the cleaner and scrub using a maroon Scotch-Brite pad or stiff nylon brush.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWipe with a clean wet rag to remove EnviroKlean.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWipe again with a dry rag to remove remaining cleaner or contamination.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAllow the surface to dry.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSand with approximately \u003cstrong\u003e180 grit or a fine sanding sponge\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApply T9000.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eGrease, oil and other contaminants must be completely removed before priming.\u003c\/p\u003e\n\u003ch5\u003eApplication\u003c\/h5\u003e\n\u003cp\u003eT9000 can be applied by:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eAir-assisted airless\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAirless sprayer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHVLP turbine\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGravity cup gun\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBrush\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRoller\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApply approximately:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3–5 wet mils per coat\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRecommended:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1–2 coats\u003c\/strong\u003e, depending on the application.\u003c\/p\u003e\n\u003cp\u003eMaximum total dry film build:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6 mils\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eAirless Spray Settings\u003c\/h5\u003e\n\u003cp\u003eRecommended airless settings:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure:\u003c\/strong\u003e 1,200–2,000 PSI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTip Sizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e306\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e308\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e408\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse a \u003cstrong\u003eFine Finish or Ultra Finish\u003c\/strong\u003e tip.\u003c\/p\u003e\n\u003ch3\u003eAir-Assisted Airless Settings\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFluid Pressure:\u003c\/strong\u003e 300–600 PSI\u003cbr\u003e\u003cstrong\u003eAir Pressure:\u003c\/strong\u003e 25 PSI triggered\u003cbr\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e 04 or 06 \/ approximately .009–.011\"\u003c\/p\u003e\n\u003ch3\u003eHVLP Turbine Settings\u003c\/h3\u003e\n\u003cp\u003eUse a \u003cstrong\u003e5-stage or higher HVLP turbine\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eRecommended:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeedle:\u003c\/strong\u003e 1.8 mm\u003cbr\u003e\u003cstrong\u003eAir Cap:\u003c\/strong\u003e High-solids air cap\u003cbr\u003e\u003cstrong\u003eAir Pressure:\u003c\/strong\u003e Maximum\u003c\/p\u003e\n\u003cp\u003eReduction:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0–5% ELRX010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0–10% water\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eGravity Cup Gun Settings\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAir Pressure:\u003c\/strong\u003e 25–35 PSI\u003cbr\u003e\u003cstrong\u003eNeedle:\u003c\/strong\u003e 1.8 mm\u003c\/p\u003e\n\u003cp\u003eReduction:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0–5% ELRX010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0–10% water\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eBrush \u0026amp; Roller Application\u003c\/h5\u003e\n\u003ch3\u003eBrush\u003c\/h3\u003e\n\u003cp\u003eUse a medium-to-firm \u003cstrong\u003enylon or polyester brush\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eRoller\u003c\/h3\u003e\n\u003cp\u003eUse:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMohair\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVelour\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e3\/16\" microfiber\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eReduction:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0–3% ELRX010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eor\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e0–10% water\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eDrying Times\u003c\/h5\u003e\n\u003cp\u003eAt approximately \u003cstrong\u003e20°C (68°F)\u003c\/strong\u003e with a 4–5 wet mil application:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry to Touch:\u003c\/strong\u003e 20 minutes\u003cbr\u003e\u003cstrong\u003eDry to Sand:\u003c\/strong\u003e 60 minutes\u003cbr\u003e\u003cstrong\u003eDry to Stack:\u003c\/strong\u003e Overnight\u003cbr\u003e\u003cstrong\u003eDry to Topcoat:\u003c\/strong\u003e 4 hours\u003c\/p\u003e\n\u003cp\u003eA second coat or a very heavy first coat can approximately \u003cstrong\u003edouble these drying times\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch5\u003eForce Drying\u003c\/h5\u003e\n\u003cp\u003eT9000 responds well to heat and can be force dried for faster production.\u003c\/p\u003e\n\u003ch3\u003eConventional Oven\u003c\/h3\u003e\n\u003cp\u003eAt approximately \u003cstrong\u003e40–50°C (104–120°F):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDry to Touch:\u003c\/strong\u003e 10 minutes\u003cbr\u003e\u003cstrong\u003eDry to Sand:\u003c\/strong\u003e 30 minutes\u003cbr\u003e\u003cstrong\u003eDry to Stack:\u003c\/strong\u003e 1–3 hours\u003c\/p\u003e\n\u003ch3\u003eSun-Spot IR Cure\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFlash Off:\u003c\/strong\u003e 2–5 minutes\u003cbr\u003e\u003cstrong\u003eDirect Cure:\u003c\/strong\u003e 5 minutes at 60–70°C (140–160°F)\u003cbr\u003e\u003cstrong\u003eRack Cure:\u003c\/strong\u003e 10 minutes at 20%+ power\u003cbr\u003e\u003cstrong\u003eCool Down:\u003c\/strong\u003e 15–20 minutes\u003c\/p\u003e\n\u003cp\u003eThe coating is ready to sand or stack after cooling.\u003c\/p\u003e\n\u003ch5\u003eApplication Temperature\u003c\/h5\u003e\n\u003cp\u003eThe coating temperature during application should be at least:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e16°C (60°F)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor colder conditions, Envirolak recommends warming the material or adding water as appropriate before spraying.\u003c\/p\u003e\n\u003ch5\u003eImportant Equipment Cleaning Requirement\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eT9000 liquid must not be mixed with other coating materials.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpray equipment must be thoroughly flushed with \u003cstrong\u003ewater before and after using T9000\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eLoading another coating into equipment containing T9000 residue without first rinsing with water can cause the resin to separate, producing grit and significant equipment clogging.\u003c\/p\u003e\n\u003cp\u003eAlso:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not mix liquid T9000 with ELRX110 EnviroKlean.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe combination can form a gelatinous mass that is difficult to remove from equipment.\u003c\/p\u003e\n\u003ch5\u003eCleanup\u003c\/h5\u003e\n\u003cp\u003eFlush spray equipment with \u003cstrong\u003eclean water until the water runs clear\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWet T9000 can be cleaned with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWater without soap\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlcohol\/water blend\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDried material can be cleaned using \u003cstrong\u003eELRX110\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch5\u003eTinting T9000 Dark Grey\u003c\/h5\u003e\n\u003cp\u003eT9000 is supplied as a white primer.\u003c\/p\u003e\n\u003cp\u003eFor projects receiving dark-coloured topcoats, T9000 can be tinted with \u003cstrong\u003eT900BT Black Tinter\u003c\/strong\u003e to create a dark grey primer base.\u003c\/p\u003e\n\u003cp\u003eThis can help provide a more appropriate foundation beneath dark pigmented finishes.\u003c\/p\u003e\n\u003ch5\u003eCompatible Envirolak Topcoats\u003c\/h5\u003e\n\u003cp\u003eThe updated 2026 T9000 formula can be used beneath \u003cstrong\u003eall Envirolak topcoats, including the 100 Series\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eAlways follow the appropriate Envirolak finishing system and current technical data sheets for the selected topcoat.\u003c\/p\u003e\n\u003ch5\u003eTechnical Specifications\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e Envirolak T9000 Universal Stain \u0026amp; Tannin Blocking Primer\u003cbr\u003e\u003cstrong\u003eProduct Code:\u003c\/strong\u003e ELPRT9000 \/ PRT9000\u003cbr\u003e\u003cstrong\u003eType:\u003c\/strong\u003e 1K water-based primer\u003cbr\u003e\u003cstrong\u003eComponents:\u003c\/strong\u003e 1\u003cbr\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e White; tintable dark grey with T900BT\u003cbr\u003e\u003cstrong\u003eRecommended Coats:\u003c\/strong\u003e 1–2\u003cbr\u003e\u003cstrong\u003eWet Film Build:\u003c\/strong\u003e 3–5 mils\u003cbr\u003e\u003cstrong\u003eMaximum Dry Film Build:\u003c\/strong\u003e 6 mils\u003cbr\u003e\u003cstrong\u003eMinimum Coating Temperature:\u003c\/strong\u003e 16°C (60°F)\u003cbr\u003e\u003cstrong\u003eDry to Touch:\u003c\/strong\u003e 20 minutes at 20°C\u003cbr\u003e\u003cstrong\u003eDry to Sand:\u003c\/strong\u003e 60 minutes at 20°C\u003cbr\u003e\u003cstrong\u003eDry to Topcoat:\u003c\/strong\u003e 4 hours at 20°C\u003cbr\u003e\u003cstrong\u003eDry to Stack:\u003c\/strong\u003e Overnight\u003cbr\u003e\u003cstrong\u003eSpecific Gravity:\u003c\/strong\u003e 1.38 ±2%\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e 2,500 cps at 25°C\u003cbr\u003e\u003cstrong\u003eSolids by Weight:\u003c\/strong\u003e 59%\u003cbr\u003e\u003cstrong\u003eVOC:\u003c\/strong\u003e 13 g\/L\u003cbr\u003e\u003cstrong\u003eVOC Less Exempt:\u003c\/strong\u003e 22 g\/L\u003cbr\u003e\u003cstrong\u003ePot Life:\u003c\/strong\u003e None\u003cbr\u003e\u003cstrong\u003eFlash Point:\u003c\/strong\u003e \u0026gt;100°C\u003cbr\u003e\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 12 months unopened\u003cbr\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e 18–25°C recommended; do not store below 5°C\u003cbr\u003e\u003cstrong\u003eCleanup:\u003c\/strong\u003e Water while wet\u003cbr\u003e\u003cstrong\u003eProfessional\/Industrial Use:\u003c\/strong\u003e Yes\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003ch3\u003eWhat is Envirolak T9000?\u003c\/h3\u003e\n\u003cp\u003eEnvirolak T9000 is a one-component water-based universal stain and tannin blocking primer designed for professional refinishing and new construction applications.\u003c\/p\u003e\n\u003ch3\u003eWhat changed with the 2026 T9000 formula?\u003c\/h3\u003e\n\u003cp\u003eThe updated 2026 formula provides higher build, better adhesion, improved moisture resistance and easy sanding. It is also compatible with all Envirolak topcoats, including the 100 Series.\u003c\/p\u003e\n\u003ch3\u003eDoes T9000 block wood tannins?\u003c\/h3\u003e\n\u003cp\u003eYes. T9000 is specifically formulated to provide excellent stain, dye and tannin blocking.\u003c\/p\u003e\n\u003ch3\u003eIs T9000 a bonding primer?\u003c\/h3\u003e\n\u003cp\u003eYes. T9000 provides excellent adhesion to properly prepared existing solvent- and water-based coatings as well as veneers, solid wood, MDF, plastics, concrete and stone.\u003c\/p\u003e\n\u003ch3\u003eCan I use T9000 on kitchen cabinets?\u003c\/h3\u003e\n\u003cp\u003eYes. Cabinetry is one of the primary applications specified by Envirolak for T9000.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be used on MDF?\u003c\/h3\u003e\n\u003cp\u003eYes. T9000 can be applied to properly prepared MDF. Envirolak recommends sanding raw MDF, wood and veneer with 180–320 grit before priming.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be applied over existing paint or coatings?\u003c\/h3\u003e\n\u003cp\u003eYes. T9000 can bond to properly prepared existing solvent- and water-based finishes. The existing surface must be thoroughly cleaned, degreased and sanded before application.\u003c\/p\u003e\n\u003ch3\u003eDoes T9000 need a catalyst?\u003c\/h3\u003e\n\u003cp\u003eNo. T9000 is a 1K, one-component primer and does not require a catalyst.\u003c\/p\u003e\n\u003ch3\u003eWhat is the pot life of T9000?\u003c\/h3\u003e\n\u003cp\u003eT9000 has no pot life because it is a one-component product.\u003c\/p\u003e\n\u003ch3\u003eHow many coats of T9000 should I apply?\u003c\/h3\u003e\n\u003cp\u003eEnvirolak recommends 1–2 coats depending on the application.\u003c\/p\u003e\n\u003ch3\u003eHow long does T9000 take to dry?\u003c\/h3\u003e\n\u003cp\u003eAt approximately 20°C (68°F), T9000 dries to the touch in about 20 minutes and can be sanded after approximately 60 minutes.\u003c\/p\u003e\n\u003ch3\u003eHow long before T9000 can be topcoated?\u003c\/h3\u003e\n\u003cp\u003eUnder normal air-drying conditions at approximately 20°C, allow about \u003cstrong\u003e4 hours\u003c\/strong\u003e before topcoating.\u003c\/p\u003e\n\u003ch3\u003eDo I need to sand between coats of T9000?\u003c\/h3\u003e\n\u003cp\u003eA second coat of T9000 can be applied without sanding when it is applied within approximately 4 hours. For best appearance before applying subsequent layers, lightly sand the primer with 320 grit or a fine sanding sponge.\u003c\/p\u003e\n\u003ch3\u003eWhat airless tip should I use for T9000?\u003c\/h3\u003e\n\u003cp\u003eEnvirolak recommends 306, 308 or 408 Fine Finish or Ultra Finish airless tips at approximately 1,200–2,000 PSI.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be sprayed with an HVLP turbine?\u003c\/h3\u003e\n\u003cp\u003eYes. Envirolak recommends a 5-stage or higher HVLP turbine with a 1.8 mm needle and high-solids air cap.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be brushed or rolled?\u003c\/h3\u003e\n\u003cp\u003eYes. Use a medium-to-firm nylon or polyester brush, or a mohair, velour or 3\/16-inch microfiber roller.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be reduced with water?\u003c\/h3\u003e\n\u003cp\u003eYes. Depending on the application equipment, Envirolak allows reduction with water up to approximately 10%. Follow the specific application instructions for the equipment being used.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be force dried?\u003c\/h3\u003e\n\u003cp\u003eYes. T9000 responds well to heat and can be force dried using a conventional oven or compatible infrared curing equipment according to Envirolak's technical instructions.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be used under Envirolak 100 Series topcoats?\u003c\/h3\u003e\n\u003cp\u003eYes. The updated 2026 formula can be used under all Envirolak topcoats, including the 100 Series.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be tinted?\u003c\/h3\u003e\n\u003cp\u003eYes. White T9000 can be tinted with T900BT Black Tinter to create a dark grey primer for use beneath dark-coloured finishes.\u003c\/p\u003e\n\u003ch3\u003eHow do I clean T9000 from spray equipment?\u003c\/h3\u003e\n\u003cp\u003eFlush equipment thoroughly with clean water until the water runs clear. Envirolak specifically warns that equipment should be water-flushed before and after using T9000.\u003c\/p\u003e\n\u003ch3\u003eCan T9000 be mixed with ELRX110 EnviroKlean?\u003c\/h3\u003e\n\u003cp\u003eNo. Do not mix liquid T9000 with ELRX110. Envirolak warns that doing so can create a gelatinous mass that is difficult to clean from equipment.\u003c\/p\u003e\n\u003ch3\u003eWhat is the VOC content of T9000?\u003c\/h3\u003e\n\u003cp\u003eThe current Envirolak TDS lists T9000 at approximately \u003cstrong\u003e13 g\/L VOC\u003c\/strong\u003e, or 22 g\/L less exempt compounds.\u003c\/p\u003e\n\u003ch3\u003eWhat is the shelf life of T9000?\u003c\/h3\u003e\n\u003cp\u003eT9000 has a shelf life of approximately \u003cstrong\u003e12 months in unopened containers\u003c\/strong\u003e when stored according to Envirolak's recommendations.\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"3,79 L (1 gal) \/ Blanc","offer_id":40069293244471,"sku":"ELPRT9000-1GAL","price":89.99,"currency_code":"CAD","in_stock":true},{"title":"15L (4 Gal) \/ Blanc","offer_id":40069293277239,"sku":"ELPRT9000-4GAL","price":349.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/T90001080x1080.jpg?v=1710278172"},{"product_id":"envirolak-envirothane-100","title":"Envirothane 100 Fini Transparent Autonettoyant","description":"\u003ch2\u003eEnvirothane 100: The Ultimate Low VOC Self-Seal Finish for Lasting Beauty!\u003c\/h2\u003e\n\u003cp\u003eEnvirolak's Envirothane 100 Warm Clear Self-Seal Topcoat is the perfect choice for any professional painter or cabinet refinisher. This one-component urethane clear coat provides wooden surfaces with a lasting and durable finish that meets or exceeds KCMA standards as a 1k product. The unique combination of long lasting strength, brilliant look and enhanced hand-feel of traditional solvent-based coating is all available in an industry leading low VOC water based finish.\u003c\/p\u003e\n\u003cp\u003eWhether tinting for dark colors, catalyzing with CAT100 hardener or crosslinking with CAT150 Crosslinker, the versatility and versatility of this product creates amazing results every time. Improve vertical flow chemical and mar resistance while achieving that perfect wood warmth, defense against fading and incredible water and stain resistance. Take your projects to the next level with Envirolak's Envirothane 100 — your enhancement solution.\u003c\/p\u003e\n\u003ch2\u003eUSES\u003c\/h2\u003e\n\u003cp\u003eThis product is designed for interior wood finishing applications such as tables, cabinetry, furniture, flooring, and millwork. \u003c\/p\u003e\n\u003ch2\u003eTechnical Data Sheet\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/envirolak.com\/wp-content\/uploads\/2020\/12\/EL100-TDS.pdf\" title=\"Envirothane 100 Warm Clear Self-Seal Topcoat\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTDS Envirothane 100 Warm Clear Self-Seal Topcoat\u003c\/a\u003e\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"3,79 L (1 Gal) \/ 05 - Plat Mort","offer_id":40103542685751,"sku":"E100-051","price":125.95,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (1 Gal) \/ 10 - Plat","offer_id":40103542718519,"sku":"E100-101","price":125.95,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (1 Gal) \/ 20 - Faible brillance","offer_id":40103542751287,"sku":"E100-201","price":125.95,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (1 Gal) \/ 30 - Satin","offer_id":40103542784055,"sku":"E100-301","price":125.95,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (1 Gal) \/ 50 - Semi-Brillant","offer_id":40103545110583,"sku":"E100-501","price":125.95,"currency_code":"CAD","in_stock":true},{"title":"3,79 L (1 Gal) \/ 90 - Gloss","offer_id":40103545143351,"sku":"E100-901","price":125.95,"currency_code":"CAD","in_stock":true},{"title":"18,9 L (5 Gal) \/ 05 - Plat Mort","offer_id":41274040909879,"sku":"","price":509.99,"currency_code":"CAD","in_stock":true},{"title":"18,9 L (5 Gal) \/ 10 - Plat","offer_id":41274040942647,"sku":"","price":509.99,"currency_code":"CAD","in_stock":true},{"title":"18,9 L (5 Gal) \/ 20 - Faible brillance","offer_id":41274040975415,"sku":"","price":509.99,"currency_code":"CAD","in_stock":true},{"title":"18,9 L (5 Gal) \/ 30 - Satin","offer_id":41274041008183,"sku":"","price":509.99,"currency_code":"CAD","in_stock":true},{"title":"18,9 L (5 Gal) \/ 50 - Semi-Brillant","offer_id":41274041040951,"sku":"","price":509.99,"currency_code":"CAD","in_stock":true},{"title":"18,9 L (5 Gal) \/ 90 - Gloss","offer_id":41274041073719,"sku":"","price":509.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/E1001gal_Page_1.png?v=1677098202"},{"product_id":"envirothane-200-warm-white-topcoat-elnyw200-xx-1-gal-3-79l","title":"Envirothane 200 Topcoat For Light Colors, ELNYW200-XX","description":"\u003ch2\u003e\u003cspan\u003eEnvirothane 200: The Ultimate Solvent-Free Topcoat for a Sleek, Lasting Finish\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eEnvirolak \u003cspan\u003eEnvirothane \u003c\/span\u003e200 is the perfect finish for all of your professional painting and cabinet refinishing projects. This topcoat is made from a polyurethane dispersion, offering superior flexibility without any harmful solvents or catalysts. With the Envirothane 200 Warm White Topcoat your kitchen and bathroom cabinets will look smooth and sleek with excellent levelling and anti-sag performance on vertical surfaces. Get a professional finish without the hassle of traditional varnish. The Envirothane 200 provides you with a stunning, fade-proof white finish that will last for years to come. Enjoy peace of mind knowing that you are using a topcoat for your projects that is not only creative, but also free from dangerous solvents or catalysts. With superior flexibility and durable result, there's no better solution to paint jobs than the Envirolak \u003cspan\u003eEnvirothane \u003c\/span\u003e200!\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eUSES\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\" data-pm-slice=\"1 1 []\"\u003eThis product is designed for interior wood finishing applications such as cabinetry, tables, furniture and millwork. \u003c\/p\u003e\n\u003ch2\u003eProduct Preparation\u003c\/h2\u003e\n\u003cp\u003e• Reduction is not required if spraying through a pump, but the product may be reduced with water or ELRX010 Reducer to improve application characteristics depending on the equipment used. \u003cbr\u003e• Product should be at room temperature and mixed thoroughly prior to finishing to ensure consistency and gloss. \u003cbr\u003e• This product is designed for interior wood finishing applications such as cabinetry, tables, furniture, and millwork. \u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e• Note: When used as a 2K product with ELCAT100 the gloss of ELNYW200XX will increase with increasing amounts of the hardener. Using 5% ELCAT100 will increase gloss 4-6 units and using 10% ELCAT100 will increase gloss 8-12 units.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000;\"\u003eTechnical Data Sheet\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/envirolak.com\/wp-content\/uploads\/2022\/01\/ELNYW200XX-TDS.pdf\" title=\"Envirolak Envirothane 200 White Topcoat\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cspan style=\"color: #000000;\"\u003eTDS Envirothane 200 White Topcoat\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"10 - Plat","offer_id":40103562313783,"sku":"E200-101","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"20 - Faible brillance","offer_id":40103562379319,"sku":"E200-201","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"30 - Satin","offer_id":40103562444855,"sku":"E200-301","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"50 - Semi-Brillant","offer_id":40103562510391,"sku":"E200-501","price":159.95,"currency_code":"CAD","in_stock":true},{"title":"90 - Gloss","offer_id":40103562575927,"sku":"E200-901","price":159.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/E2001GAL.png?v=1677100753"},{"product_id":"envirothane-125-low-slip-clear-self-seal-topcoat","title":"Envirothane 125 Finition transparente antidérapante à auto-scellage","description":"\u003csection data-element_type=\"section\" data-id=\"15f4dce\" class=\"elementor-section elementor-top-section elementor-element elementor-element-15f4dce elementor-section-boxed elementor-section-height-default elementor-section-height-default\"\u003e\n\u003cdiv class=\"elementor-container elementor-column-gap-default\"\u003e\n\u003cdiv data-element_type=\"column\" data-id=\"7ebe784\" class=\"elementor-column elementor-col-50 elementor-top-column elementor-element elementor-element-7ebe784\"\u003e\n\u003cdiv class=\"elementor-widget-wrap elementor-element-populated\"\u003e\n\u003cdiv data-widget_type=\"text-editor.default\" data-element_type=\"widget\" data-id=\"016ee27\" class=\"elementor-element elementor-element-016ee27 elementor-widget elementor-widget-text-editor\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv title=\"Page 1\" class=\"page\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003eLe \u003cstrong\u003eEnvirolak EL125XX\u003c\/strong\u003e Le vernis transparent en uréthane est le choix idéal pour ceux qui cherchent à protéger et embellir leur \u003cstrong\u003eplanchers et escaliers en bois\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eCe vernis de finition à base d'eau offre la robustesse des finitions traditionnelles à base de solvant tout en étant respectueux de l'environnement.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cem\u003eDisponible en deux finitions : Dead Flat (5 Brillance) et Satin (30 Brillance), il offre un bel aspect naturel qui met en valeur l'apparence du bois sans compromettre la durabilité.\u003c\/em\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCaractéristiques clés\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Fini Durable\u003c\/strong\u003e: Offre une excellente résistance aux taches et une protection durable pour les zones à fort trafic comme les sols et les escaliers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Deux options de brillance\u003c\/strong\u003eChoisissez entre Mat pour une finition presque invisible ou Satiné pour un éclat subtil et élégant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Écologique\u003c\/strong\u003eLa formule à faibles COV signifie moins de produits chimiques agressifs, ce qui la rend plus sûre pour votre maison et l'environnement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Application polyvalente\u003c\/strong\u003e: Peut être appliqué par pulvérisation, brossage ou rouleau, le rendant accessible tant aux professionnels qu'aux amateurs de bricolage.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFinitions Disponibles\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Mat Mort (5 Brillance)\u003c\/strong\u003e: Pour ceux qui préfèrent une finition ultra-mate, la brillance Dead Flat est parfaite. Elle offre une couche de protection presque invisible, \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003emaintenir l'apparence naturelle du bois\u003c\/span\u003e tout en offrant une durabilité complète.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Satin (30 Brillant)\u003c\/strong\u003e: Si vous cherchez un \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eun peu plus de brillance\u003c\/span\u003e, le fini satiné offre un éclat doux et élégant. Il est suffisamment subtil pour préserver le caractère du bois tout en ajoutant une touche de sophistication à vos surfaces.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/envirothane_125_applied_on_a_wooden_surface.webp?v=1725442233\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Parquet en bois\u003c\/strong\u003e: Parfait pour les sols en bois résidentiels et commerciaux, offrant à la fois protection et attrait esthétique.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Escaliers\u003c\/strong\u003e: Idéal pour les marches et contremarches, offrant une finition antidérapante et durable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Surfaces en bois intérieures\u003c\/strong\u003e: Convient à diverses applications en bois intérieur, garantissant que vos surfaces restent belles et protégées.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eComment postuler ?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Préparation\u003c\/strong\u003eAssurez-vous que la surface en bois est propre, sèche et exempte de tout revêtement précédent.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Application\u003c\/strong\u003e: Appliquez à l'aide d'un pulvérisateur, d'un pinceau ou d'un rouleau en couches uniformes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Guérison\u003c\/strong\u003e: Laissez le vernis sécher complètement pour obtenir la meilleure durabilité et finition.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Envirolak","offers":[{"title":"5 Gloss - Deat Flat","offer_id":41243691384887,"sku":"EL125 05","price":95.27,"currency_code":"CAD","in_stock":true},{"title":"30 Brillant - Satin","offer_id":41243691417655,"sku":"EL125 30","price":95.27,"currency_code":"CAD","in_stock":true},{"title":"18.9L \/ 5 Gloss - Deat Flat","offer_id":42060906004535,"sku":null,"price":350.57,"currency_code":"CAD","in_stock":true},{"title":"18.9L \/ 30 Brillant - Satin","offer_id":42060906037303,"sku":null,"price":350.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirothane125LowSlipClearSelfSealTopcoat.png?v=1725442036"},{"product_id":"envirothane-180-neutral-high-solids-primer","title":"Envirothane 180 Neutre Primaire à Hauts Solides (ELPR180)","description":"\u003ch2\u003e\n\u003cstrong\u003eEnvirothane 180 Apprêt Neutre (ELPR180)\u003c\/strong\u003e est un apprêt à base d'eau haute performance conçu pour les finitions en bois intérieures.\u003c\/h2\u003e\n\u003cp\u003eIdéal pour \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003emobilier, meubles et autres surfaces en bois\u003c\/span\u003e. Il offre une adhérence exceptionnelle, un ponçage lisse et une excellente couverture, en particulier pour les finitions plus foncées. Que vous travailliez avec du MDF, du placage ou du bois massif, ce primaire polyvalent garantit une couche de fond durable de qualité professionnelle pour l'application de la couche de finition.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCaractéristiques clés\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Formule à haute teneur en solides\u003c\/strong\u003e: Offre une couverture et une durabilité supérieures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Excellente adhésion\u003c\/strong\u003eAdhère fortement à une variété de substrats, y compris le MDF, le placage et le bois massif.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Ponçage lisse\u003c\/strong\u003e: Assure un ponçage facile et fluide entre les couches pour une finition impeccable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Application polyvalente\u003c\/strong\u003e: Peut être utilisé comme un système 1K (monocomposant) ou 2K (bicomposant) avec durcisseur pour une durabilité accrue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Séchage Rapide\u003c\/strong\u003eLes temps de séchage rapides en font un choix idéal pour les environnements de production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Couverture de couleur sombre\u003c\/strong\u003e: Formulé spécifiquement pour une utilisation avec des systèmes de couleurs plus foncées, garantissant une excellente opacité et une bonne couverture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Compatible avec les systèmes de pulvérisation\u003c\/strong\u003e: Fonctionne efficacement avec diverses techniques de pulvérisation, y compris HVLP, sans air et pulvérisation conventionnelle.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eUtilisations recommandées\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e👉 \u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eCabinetry:\u003c\/span\u003e Obtenez une finition durable et professionnelle sur les armoires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 \u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eFurniture:\u003c\/span\u003e Idéal pour préparer les meubles en bois pour la peinture ou la teinture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 \u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eFinition du bois :\u003c\/span\u003e Fonctionne très bien sur des substrats en MDF, en placage et en bois massif.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstructions d'application\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePréparation de la surface\u003c\/strong\u003eAssurez-vous que la surface est propre, sèche et exempte de poussière ou de contaminants.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMélange\u003c\/strong\u003e: Pour une application 1K, utilisez le primaire tel quel. Pour 2K, mélangez avec le durcisseur recommandé.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Appliquer en utilisant des techniques de pulvérisation HVLP, sans air ou conventionnelles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePonçage\u003c\/strong\u003e: Laissez le primaire sécher complètement avant de poncer pour de meilleurs résultats.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003e\u003cstrong\u003eInformations techniques\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase\u003c\/strong\u003e: À base d'eau\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminer\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemps de séchage\u003c\/strong\u003e: Séchage rapide, sec au toucher en 15-30 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMéthode d'application\u003c\/strong\u003eSpray (HVLP, sans air, conventionnel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContenu en COV\u003c\/strong\u003e: Formulation à faibles COV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eQuestions Fréquemment Posées\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Sur quelles surfaces l'Envirothane 180 peut-il être utilisé ?\u003c\/strong\u003e\u003cbr\u003eC'est conçu pour une utilisation sur MDF, placage et bois massif, ce qui le rend parfait pour les projets de menuiserie, de mobilier et de finition du bois.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Ce primaire est-il adapté aux couches de finition foncées ?\u003c\/strong\u003e\u003cbr\u003eOui, il offre une excellente couverture pour les systèmes de couleur foncée, garantissant opacité et finition uniforme.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Puis-je utiliser cette base avec un pinceau, ou est-elle uniquement en spray ?\u003c\/strong\u003e\u003cbr\u003eC'est principalement conçu pour des méthodes d'application par pulvérisation telles que HVLP, sans air et pulvérisation conventionnelle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Quelle est la différence entre les systèmes 1K et 2K ?\u003c\/strong\u003e\u003cbr\u003e1K est prêt à l'emploi en tant que composant unique, tandis que 2K nécessite l'ajout d'un durcisseur pour une durabilité et des performances améliorées.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Combien de temps le primaire met-il à sécher ?\u003c\/strong\u003e\u003cbr\u003eIl sèche rapidement, devenant généralement sec au toucher en 15 à 30 minutes, ce qui permet des temps de production plus rapides.\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"Default Title","offer_id":41246108287031,"sku":"E180 1GAL","price":133.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirothane180NeutralPrimerHighSolids.png?v=1725542486"},{"product_id":"envirocryl-160-tb-tannin-blocking-white-primer","title":"Envirocryl Tannin Blocking White Primer, 160-TB","description":"\u003ch2\u003e\u003cspan\u003eEnvirocryl 160-TB: The Ultimate Water-Based Primer for Flawless Wood Finishing\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEnvirocryl 160-TB \u003c\/strong\u003efrom Envirolak is a high-performance water-based primer \u003cspan style=\"text-decoration: underline;\"\u003edesigned to block tannin bleed\u003c\/span\u003e, making it ideal for a range of wood finishing applications. It offers superior adhesion, fast drying times, and a smooth, easy-to-sand finish.\u003c\/p\u003e\n\u003cp\u003eWhether you're working with cabinetry, furniture, or millwork, this primer is versatile and effective on solid wood, veneer, MDF, and refinishing projects. When used with Envirolak topcoats, it provides a professional, durable finish that is both \u003cspan style=\"text-decoration: underline;\"\u003eeco-friendly and high-quality\u003c\/span\u003e.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Tannin Blocking:\u003c\/strong\u003e Effectively seals tannins to prevent bleed-through on light-colored topcoats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Wide Compatibility:\u003c\/strong\u003e Suitable for solid wood, veneer, MDF, and previously finished wood.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Fast Drying:\u003c\/strong\u003e Reduces waiting time between coats, speeding up project completion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Smooth Sanding:\u003c\/strong\u003e Sands easily for a professional, smooth finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Multiple Application Methods:\u003c\/strong\u003e Can be applied via spray, brush, or roller, depending on project needs.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe ELPR160-TB is designed for use on a variety of wood surfaces, providing excellent adhesion and a flawless finish across a range of projects:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Cabinetry:\u003c\/strong\u003e Perfect for kitchen cabinets and custom-built storage units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉  Furniture:\u003c\/strong\u003e Ideal for both refinishing and new construction projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉  Millwork:\u003c\/strong\u003e Great for baseboards, moldings, and other intricate architectural woodwork.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Refinishing:\u003c\/strong\u003e Superior at covering up old finishes, ensuring tannin and stain bleed-through is blocked.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication Instructions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e1. Surface Preparation:\u003c\/strong\u003e\u003cbr\u003eEnsure surfaces are clean, dry, and free from dust, oil, and grease. Sand the surface lightly if needed to ensure proper adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Application Methods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray Application:\u003c\/strong\u003e Use a high-quality spray gun for smooth, even coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrush\/Roll Application:\u003c\/strong\u003e For small areas, intricate work, or touch-ups, the primer can be applied with a brush or roller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinning:\u003c\/strong\u003e If necessary, the primer can be thinned with water (up to 5%).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3. Drying Times:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch Dry:\u003c\/strong\u003e 15-20 minutes under normal conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSandable:\u003c\/strong\u003e Ready to sand after 1 hour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoating:\u003c\/strong\u003e Recoat within 2 hours of application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eDrying times may vary depending on temperature and humidity.\u003c\/em\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approximately 350-450 square feet per gallon depending on substrate and application method.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Medium thickness for good flow and coverage; ideal for spray or manual applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Content:\u003c\/strong\u003e Less than 50 g\/L, compliant with stringent air quality regulations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life:\u003c\/strong\u003e Up to 12 months when stored properly in unopened containers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Dries to a white or light neutral color, allowing for easy overcoating with lighter finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Can I use this primer outdoors?\u003c\/strong\u003e\u003cbr\u003eThe ELPR160-TB is designed for interior use. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. How many coats are necessary?\u003c\/strong\u003e\u003cbr\u003eOne or two coats are typically sufficient for most wood surfaces. Sand lightly between coats for the best finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. What topcoat works best with ELPR160-TB?\u003c\/strong\u003e\u003cbr\u003eEnvirolak recommends using their water-based or solvent-based topcoats for the best performance and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Can I apply ELPR160-TB over previously painted surfaces?\u003c\/strong\u003e\u003cbr\u003eYes, the ELPR160-TB can be applied over previously painted or finished surfaces, but it’s recommended to sand lightly to ensure proper adhesion and a smooth finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Is this primer suitable for high-humidity areas like bathrooms?\u003c\/strong\u003e\u003cbr\u003eWhile ELPR160-TB is effective at blocking tannin bleed, it’s best used in conjunction with a water-resistant topcoat if applied in high-humidity areas to ensure durability and protection.\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"Default Title","offer_id":41255613923383,"sku":"E160TB 1GAL","price":116.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirocryl160-TBTanninBlockingWhitePrimer.png?v=1725970597"},{"product_id":"envirolak-envirothane-170-170tb-high-solids-primer","title":"Envirolak Envirothane High Solids Primer, ELPR 170 \u0026 170TB","description":"\u003ch2\u003eEnvirolak Envirothane 170 \u0026amp; 170-TB High Solids Water-Based Primer\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEnvirothane 170\u003c\/strong\u003e is a professional \u003cstrong\u003ewater-based urethane primer\u003c\/strong\u003e for interior wood finishing. It is a \u003cstrong\u003e70% solids white primer\u003c\/strong\u003e with strong filling, and it won't swell MDF fibres. It works as a 1K or 2K product. \u003cstrong\u003e170-TB\u003c\/strong\u003e is the tannin-blocking version for woods that bleed. Both are made for cabinetry, tables, furniture and millwork.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70% solids by weight,\u003c\/strong\u003e for good fill on MDF, veneer and wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast:\u003c\/strong\u003e dry to touch in 10 minutes and ready to sand in 40–60 minutes at 20 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1K or 2K:\u003c\/strong\u003e add CAT100-LV hardener for veneer, solid wood and refinishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC:\u003c\/strong\u003e 54 g\/L, with water clean-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray, brush or roll,\u003c\/strong\u003e including airless, air-assisted airless and HVLP.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eInterior cabinets, tables, furniture and millwork in MDF, veneer or solid wood. Use 170-TB over tannin-rich wood. \u003cem\u003eInterior wood only. Professional product: use the 2K system on veneer, solid wood and refinish jobs. Apply with the coating at 20 °C (68 °F) or higher.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eVersions and Sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e170:\u003c\/strong\u003e universal white primer. 3.79 L (1 gal) or 15 L (4 gal).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e170-TB:\u003c\/strong\u003e the same primer with tannin blocking. 3.79 L (1 gal) or 15 L (4 gal).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnvirothane 170, 160-TB or 180?\u003c\/h3\u003e\n\u003cp\u003e170 is the high-fill 1K\/2K white urethane primer. \u003ca href=\"\/fr\/products\/envirocryl-160-tb-tannin-blocking-white-primer\"\u003eEnvirocryl 160-TB\u003c\/a\u003e is a 1K tannin-blocking white primer. \u003ca href=\"\/fr\/products\/envirothane-180-neutral-high-solids-primer\"\u003eEnvirothane 180 Neutral\u003c\/a\u003e is the one to tint for dark colours.\u003c\/p\u003e\n\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilm build:\u003c\/strong\u003e 4–6 mils wet per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer TDS test board:\u003c\/strong\u003e 16–24 g per 0.1 m² (250 × 400 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWater-based urethane primer, 1K or 2K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSolids\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70% by weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e54 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardener (2K)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/fr\/products\/envirocat-100-lv-water-based-hardener\"\u003eCAT100-LV\u003c\/a\u003e, 5% by weight (1.2 kg per 22.7 kg pail). Pot life about 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry at 20 °C\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 10 minutes. Sand 40–60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCoating at 20 °C (68 °F) or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpray\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAirless 2,000–3,000 psi. Air-assisted airless 500–800 psi fluid, 25 psi air. HVLP with a 5-stage turbine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReduction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHVLP: 10% ELRX010 or 20–30% water. Cup gun: 2–5% ELRX010 or 10–15% water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSanding\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrimer with 320 or 400 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12 months unopened at 18–25 °C. Protect from freezing and sunlight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlush equipment with water until it runs clear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface.\u003c\/strong\u003e Sand solid wood with 150 or 180 grit and MDF with 240–320 grit. Remove all dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose 1K or 2K.\u003c\/strong\u003e Use 2K on veneer, solid wood or a refinish. Stir in 5% CAT100-LV by weight and mix well.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir and reduce\u003c\/strong\u003e if needed for your equipment. Keep the coating at 20 °C or higher.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply 4–6 mils wet,\u003c\/strong\u003e by spray, brush or roller. Use a nylon or polyester brush, or a mohair, velour or microfibre roller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet it dry.\u003c\/strong\u003e Touch-dry takes about 10 minutes and sanding 40–60 minutes at 20 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSand the primer\u003c\/strong\u003e with 320 or 400 grit paper or fine sponges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTopcoat\u003c\/strong\u003e with Envirothane or Envirocryl topcoats. Flush equipment with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow much primer do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThe TDS gives film weight, not coverage: 16–24 g per 0.1 m². At about 1.5 specific gravity, a 3.79 L can covers roughly 24–35 m² (255–380 sq ft) per coat before spray losses. For 15 m² of cabinets, plan on about half a can per coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat's the difference between 170 and 170-TB?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003e170-TB adds tannin blocking for woods that bleed through finishes. Otherwise both are the same 70% solids white primer.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need the hardener?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOn MDF you can use it as a 1K primer. On veneer, solid wood and refinishing, the TDS says to use it as a 2K system with CAT100-LV hardener. Pot life is about 2 hours.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat can I topcoat it with?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eEnvirolak lists \u003ca href=\"\/fr\/products\/envirothane-200-warm-white-topcoat-elnyw200-xx-1-gal-3-79l\"\u003eEnvirothane 200\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/envirocryl-400-white-topcoat-elacw400xx\"\u003eEnvirocryl 400\u003c\/a\u003e, \u003ca href=\"\/fr\/products\/envirolak-envirothane-100\"\u003eEnvirothane 100\u003c\/a\u003e (1K or 2K) or \u003ca href=\"\/fr\/products\/envirolak-800-white-topcoat-elnyw800xx\"\u003eEnvirothane 800\u003c\/a\u003e. Sand the primer with 320 or 400 grit first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat spray equipment works?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eAirless at 2,000–3,000 psi, air-assisted airless at 500–800 psi fluid with 25 psi air, or HVLP with a 5-stage turbine. A cup gun and brush or roller also work.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat temperature does it need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eThe coating should be at 20 °C (68 °F) or higher when applied. Store it at 18–25 °C and protect it from freezing and direct sunlight.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it outdoors?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. The TDS covers interior wood finishing: cabinetry, tables, furniture and millwork.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long does it keep, and how do I clean up?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eShelf life is 12 months unopened. Flush equipment with water until it runs clear.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n","brand":"Envirolak","offers":[{"title":"White \/ 170 Apprêt \/ 3,79 L (1 Gal)","offer_id":41260793233463,"sku":"ELPR170-1 Gal","price":103.95,"currency_code":"CAD","in_stock":true},{"title":"White \/ 170 Apprêt \/ 15L (4 Gal)","offer_id":41274023411767,"sku":"ELPR170-4 Gal","price":380.95,"currency_code":"CAD","in_stock":true},{"title":"White \/ 170-TB (Primaire de Blocage de Bronzage) \/ 3,79 L (1 Gal)","offer_id":41260793266231,"sku":"ELPR170-TB","price":131.95,"currency_code":"CAD","in_stock":true},{"title":"White \/ 170-TB (Primaire de Blocage de Bronzage) \/ 15L (4 Gal)","offer_id":41274023444535,"sku":"","price":405.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirothane_170_White_Primer_High_Solids.png?v=1726069846"},{"product_id":"envirocryl-400-white-topcoat-elacw400xx","title":"Envirocryl 400 Revêtement Blanc (ELACW400XX)","description":"\u003ch2\u003eEnvirocryl 400 White Topcoat: The Ultimate Wood Finish for Durability and Style\u003c\/h2\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eEnvirocryl 400 White Topcoat\u003c\/strong\u003e, the perfect solution for professional-quality wood finishes. Whether you're working on \u003cspan style=\"text-decoration: underline;\"\u003ecabinetry, furniture, or interior woodwork\u003c\/span\u003e, this water-based acrylic topcoat offers outstanding performance. It dries fast, sprays easily with various equipment, and delivers a smooth, durable finish, making it ideal for high-use environments like kitchens and bathrooms.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Professional Finish:\u003c\/strong\u003e Provides a flawless, smooth finish on wood surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Durability in High-Wear Areas:\u003c\/strong\u003e Perfect for high-traffic environments like kitchens and bathrooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Fast Drying Time:\u003c\/strong\u003e Speeds up your workflow with quick drying between coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Application Flexibility:\u003c\/strong\u003e Compatible with a range of spray systems—airless, air-assisted airless, and HVLP.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Superior Chemical and Marring Resistance:\u003c\/strong\u003e Keep your wood surfaces looking pristine even in tough conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Enhanced Durability with Crosslinking\u003c\/strong\u003e: For added toughness, you can crosslink the product with \u003cstrong\u003eCAT150\u003c\/strong\u003e, making it even more resistant to chemicals and wear.\u003c\/p\u003e\n\u003ch2\u003eHow to Apply Envirocryl 400?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Surface Preparation\u003c\/strong\u003e: Ensure the wood is clean, dry, and free of debris. Sand with 180-220 grit paper for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Application\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse airless, air-assisted airless, or HVLP spray systems.\u003c\/li\u003e\n\u003cli\u003eStir well; no thinning needed. Apply a uniform, even coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e3. Drying \u0026amp; Recoating\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTouch dry in 15-30 minutes.\u003c\/li\u003e\n\u003cli\u003eRecoat after 1-2 hours.\u003c\/li\u003e\n\u003cli\u003eSand lightly between coats with 320-400 grit paper for smoothness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e4. Final Curing\u003c\/strong\u003e: Fully cures in 5-7 days for maximum durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Optional Crosslinking\u003c\/strong\u003e: Add CAT150 for enhanced chemical and scratch resistance. Mix according to guidelines for tough, high-traffic areas.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sheens\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Flat (10 Gloss): \u003c\/strong\u003eBest for a modern, minimalistic look with no shine. Ideal for low-traffic areas like living rooms or bedrooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Low Gloss (20 Gloss): \u003c\/strong\u003ePerfect for a subtle sheen that offers a soft glow. Suitable for general use areas like dining rooms or hallways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Satin (30 Gloss): \u003c\/strong\u003eProvides a noticeable shine. Ideal for high-traffic areas like kitchens and bathrooms where durability and a polished look are key.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEach sheen offers the same level of protection but enhances the look of different surfaces. Choose based on the style and use of your space!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions (FAQs)\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Can Envirocryl 400 be used without thinning?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, Envirocryl 400 is ready-to-use and does not require thinning before application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. How long does it take to dry?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnvirocryl 400 becomes touch dry in 15-30 minutes and is ready for recoating in 1-2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. What spray systems are compatible?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works with airless, air-assisted airless, and HVLP spray systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Can I increase the durability of the finish?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, you can add CAT150 for enhanced chemical and scratch resistance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. What sheen options are available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is available in Flat (10 Gloss), Low Gloss (20 Gloss), and Satin (30 Gloss) finishes.\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"10 Brillant","offer_id":41268869791799,"sku":"E400-101","price":114.97,"currency_code":"CAD","in_stock":true},{"title":"20 Brillant","offer_id":41268869824567,"sku":"E400-201","price":114.97,"currency_code":"CAD","in_stock":true},{"title":"30 Brillant","offer_id":41268869857335,"sku":"E400-301","price":114.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirocryl400WhiteTopcoat.png?v=1726420975"},{"product_id":"envirolak-800-white-topcoat-elnyw800xx","title":"Envirolak 800 Couche de finition blanche (ELNYW800XX)","description":"\u003ch2\u003eIntroducing the ELNYW 800XX White Topcoat: A Premium Finish for Your Interior Wood Projects!\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eLooking for a high-performance white topcoat for your wood finishing projects? Look no further than \u003cstrong\u003eELNYW 800XX\u003c\/strong\u003e, a top-tier 1K white finish designed for everything from kitchen cabinets to custom furniture. This product combines exceptional stain resistance, fast drying, and high coverage to deliver a flawless finish, even for first-time users.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Durable Finish:\u003c\/strong\u003e ELNYW 800XX meets KCMA standards, meaning it's tough enough for demanding environments like kitchens and bathrooms. It offers superior resistance to stains and scuffs, making it perfect for areas prone to heavy use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Smooth, Professional Look:\u003c\/strong\u003e This product has excellent leveling and anti-sag properties, which means it creates a smooth, consistent finish, even on vertical surfaces. Whether you’re working with cabinetry, tables, or millwork, ELNYW 800XX ensures a flawless result.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Versatile Application:\u003c\/strong\u003e Ideal for both DIY enthusiasts and professional finishers, this product is designed for spray application and works with various sprayer types, including air-assisted airless and airless systems. No thinning is required, but you can optionally reduce it with water or RX010 for custom results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Fast Drying:\u003c\/strong\u003e No need to wait all day! It air dries in as little as 10-15 minutes and is ready to sand or recoat in 1-2 hours under normal conditions. For an even quicker finish, pair it with a conventional or IR oven system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Multiple Sheen Options:\u003c\/strong\u003e Available in 20, 30, and 50 sheens, offering flexibility in gloss levels to suit your design preference, from low gloss to semi-gloss finishes.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sheens\u003c\/h2\u003e\n\u003cp\u003eWhen picking a sheen for your project, the finish's gloss level can make a big difference in both the appearance and durability. Here's a guide to help you choose:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 20 Sheen (Low Gloss):\u003c\/strong\u003e Ideal for a soft, matte finish. Perfect for subtle, elegant projects like dining tables or custom millwork where you want a natural look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 30 Sheen (Satin):\u003c\/strong\u003e Offers a smooth, velvety appearance that balances shine and subtlety. Great for cabinets, furniture, and areas where durability is important but glare is minimized.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 50 Sheen (Semi-Gloss):\u003c\/strong\u003e Provides a reflective finish that's durable and easy to clean. Perfect for high-traffic areas like kitchen cabinets and bathroom vanities where toughness and moisture resistance matter.\u003c\/p\u003e\n\u003ch2\u003eHow to Use?\u003c\/h2\u003e\n\u003cp\u003eDon’t worry if you’re new to wood finishing. ELNYW 800XX is designed to be easy to work with, even if it’s your first time using a topcoat. Just follow these simple guidelines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e Make sure your surface is properly primed (use ELPR170 or \u003ca href=\"https:\/\/shop.thepaintpeople.com\/products\/envirolak-t9000-stain-blocking-and-bonding-primer-white-elprt9000\"\u003eELPRT9000\u003c\/a\u003e primers for best results) and sanded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Spray evenly for best results. It’s not recommended for brushing or rolling, but if you prefer to brush, dilute with 10-20% water and apply thinner coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanup:\u003c\/strong\u003e Clean all your equipment with water first, followed by acetone. For tough cleanup jobs, use ELRX110 EnviroKlean WB Cleaner for a deep clean.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details at a Glance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying Time:\u003c\/strong\u003e Touch dry in 10-15 minutes, ready for sanding in 1 hour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e High build and excellent coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Options:\u003c\/strong\u003e Available in low gloss (20), satin (30), and semi-gloss (50).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Comes in easy-to-store, eco-friendly packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Can I apply ELNYW 800XX with a brush or roller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt’s designed for spray application, but you can brush or roll it if thinned with 10-20% water. Multiple thinner coats will give the best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Do I need to thin the product before spraying?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo thinning is necessary for most sprayer systems, but you can reduce it with water or RX010 for customization.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. How long does it take to dry between coats?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnder normal conditions, it’s touch dry in 10-15 minutes and ready for sanding or recoating within 1-2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. What substrates can I use ELNYW 800XX Envirolak 800 on?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt works great on most wood surfaces, including MDF, solid wood, and veneers. For best results, use a primer like ELPR170 or ELPRT9000.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Is this product environmentally friendly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! Envirolak 800 has low VOCs (33 g\/L), making it a more eco-friendly option for your wood finishing projects.\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"20 Sheen - Faible Brillance","offer_id":41270682779703,"sku":"E800-201","price":119.95,"currency_code":"CAD","in_stock":true},{"title":"30 Satin - Satin","offer_id":41270682812471,"sku":"E800-301","price":119.95,"currency_code":"CAD","in_stock":true},{"title":"50 Brillance - Semi Brillant","offer_id":41270682845239,"sku":"E800-501","price":119.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirolak800WhiteTopcoat.png?v=1726561253"},{"product_id":"envirocryl-500-clear-topcoat","title":"Envirocryl 500 Vernis Transparent","description":"\u003ch2\u003eEnvirocryl 500: The Ultimate Clear Topcoat for Stunning, Durable Wood Finishes\u003c\/h2\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eEnvirocryl 500 Clear Topcoat\u003c\/strong\u003e – a premium, water-based, one-component acrylic finish for your interior wood projects. Whether you're working on cabinetry, furniture, or millwork, this topcoat delivers a smooth, clear, and durable finish with options to suit your desired sheen level. Available in \u003cstrong\u003eFlat (10 Gloss), Low Gloss (20 Gloss), and Satin (30 Gloss)\u003c\/strong\u003e, you’ll get just the right look.\u003c\/p\u003e\n\u003ch2\u003eKey Features:\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Water-Based Formula\u003c\/strong\u003e: Easy to use, eco-friendly, and low in VOCs, making it a safer option for both users and the environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Fast Drying\u003c\/strong\u003e: Dries to the touch in 20-25 minutes, with a recoat time of just 1-2 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ Durable Finish\u003c\/strong\u003e: This product offers excellent clarity and resistance to blocking (sticking), ensuring your woodwork remains beautiful and protected for years to come.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e✔️ No Thinning Required\u003c\/strong\u003e: Ready to use straight out of the container, although you have the option to reduce it with water or RX010 if necessary.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sheens:\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEnvirocryl 500\u003c\/strong\u003e comes in three sheen levels, helping you pick the best look and feel for your project:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat (10 Gloss)\u003c\/strong\u003e – Ideal for a more matte, natural finish. Perfect for modern, minimalist spaces or pieces that don’t need shine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Gloss (20 Gloss)\u003c\/strong\u003e – A subtle sheen that gives a soft glow without too much reflection, making it great for cabinetry or furniture in living areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin (30 Gloss)\u003c\/strong\u003e – Provides a smooth, medium shine that enhances the richness of the wood without being overly glossy. Best for high-traffic areas or furniture pieces that need a bit more protection.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eApplication:\u003c\/h2\u003e\n\u003cp\u003eDesigned specifically for interior wood surfaces, \u003cstrong\u003eEnvirocryl 500\u003c\/strong\u003e is ideal for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eCabinetry\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFurniture\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMillwork\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith its ease of application, even beginners can achieve professional results. Just sand your wood with 180 grit sandpaper before applying, then follow up with a finer 320 grit sanding after the first coat for a flawless finish.\u003c\/p\u003e\n\u003ch3\u003eApplication Methods\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirless Spray\u003c\/strong\u003e: 1500-2000 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCup Gun (gravity)\u003c\/strong\u003e: 20-25 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Assisted Airless\u003c\/strong\u003e: 400-600 PSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor best results, ensure your workspace is between 18-25°C (64-75°F) and follow proper drying times.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e1. Do I need to thin Envirocryl 500 before using it?\u003c\/strong\u003e\u003cbr\u003eNo, this product is ready to use out of the container. However, you can reduce it with water or RX010 if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Can I use Envirocryl 500 on previously stained wood?\u003c\/strong\u003e\u003cbr\u003eYes! Just make sure to sand the surface lightly with 180 grit before applying the topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. How long does it take to dry?\u003c\/strong\u003e\u003cbr\u003eIt dries to the touch in 20-25 minutes, and you can recoat after 1-2 hours. If using an oven or IR cure, drying times can be significantly reduced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. What is the best way to apply Envirocryl 500?\u003c\/strong\u003e\u003cbr\u003eYou can apply it using an airless sprayer, air-assisted airless, or even a cup gun. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. How should I store leftover product?\u003c\/strong\u003e\u003cbr\u003eKeep it sealed in the original container at room temperature (18-25°C). If unopened, it has a shelf life of up to 12 months.\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"10 Brillant - Mat","offer_id":41272185585719,"sku":"E500-101","price":114.97,"currency_code":"CAD","in_stock":true},{"title":"20 Brillant - Faible Brillant","offer_id":41272185618487,"sku":"E500-201","price":114.97,"currency_code":"CAD","in_stock":true},{"title":"30 Brillant - Satin","offer_id":41272185651255,"sku":"E500-301","price":114.97,"currency_code":"CAD","in_stock":true},{"title":"90 Deg - Gloss","offer_id":41572977213495,"sku":"E500-901","price":114.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/Envirocryl_500_Clear_Acrylic_Topcoat.png?v=1726599029"},{"product_id":"envirocat-100-lv-water-based-hardener","title":"EnviroCat 100-LV Durcisseur à base d'eau","description":"\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e\u003cem\u003eAméliorez vos finitions en bois avec une durabilité et un éclat supérieurs !\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eÊtes-vous à la recherche d'améliorer la qualité et la durabilité de vos finitions en bois ? \u003c\/span\u003e\u003cspan\u003eEnviroCat 100-LV\u003c\/span\u003e\u003cspan\u003e est votre compagnon parfait. Cet durcisseur à base d'eau est spécialement formulé pour améliorer les performances de vos finitions à base d'eau, rendant vos projets en bois plus résistants et magnifiques. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eQue vous travailliez sur des armoires, des meubles ou des ouvrages de menuiserie, EnviroCat 100-LV garantit une finition de qualité professionnelle à chaque fois.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eCaractéristiques de l'EnviroCat 100-LV \u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eDureté et durabilité améliorées :\u003c\/strong\u003e\u003cspan\u003e Augmente la dureté et la résistance aux rayures de vos finitions, garantissant une beauté durable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e✅\u003c\/b\u003eRésistance améliorée aux produits chimiques et à l'eau\u003c\/strong\u003ence:\u003c\/span\u003e\u003cspan\u003e Protège vos surfaces en bois des usures quotidiennes, ainsi que des éclaboussures et des taches.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eAugmente les niveaux de brillance :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eAjoute un supplément de 5 à 10 % de brillance, offrant à vos finitions un bel éclat de haute qualité.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eUtilisation polyvalente :\u003c\/strong\u003e\u003cspan\u003e Parfait pour les couches de finition et les couches de base, améliorant l'adhérence et empêchant le contrôle du placage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eViscosité Faible :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eFacile à mélanger et à appliquer, garantissant une finition lisse et uniforme.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eÉcologique :\u003c\/strong\u003e\u003cspan\u003e Formule à base d'eau avec de faibles COV, ce qui la rend plus sûre pour une utilisation intérieure et pour l'environnement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eSensible à l'humidité :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eNécessite un stockage soigneux pour maintenir la qualité du produit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eComment utiliser EnviroCat 100-LV ?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eObtenir les meilleurs résultats avec EnviroCat 100-LV est simple lorsque vous suivez ces étapes faciles :\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e1. Préparation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eAssurez un stockage approprié :\u003c\/strong\u003e\u003cspan\u003e Conservez EnviroCat 100-LV dans un conteneur hermétiquement fermé à température ambiante (18-25°C \/ 64-75°F). Gardez-le à l'abri de l'humidité, de la lumière directe du soleil et des températures inférieures à 5°C (41°F).\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eVérifier la qualité du produit :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eAvant utilisation, assurez-vous que le durcisseur est clair et exempt de toute brume ou formation de peau. Ne pas utiliser si le produit semble trouble ou a une surface durcie.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e2. Mélange\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eAgitation Mécanique :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eAjoutez EnviroCat 100-LV à votre produit Envirolak choisi (couche de finition ou couche de base) sous agitation mécanique.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eMélanger soigneusement :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eRemuez le mélange pendant plusieurs minutes pour garantir un mélange lisse et homogène. Cette étape est cruciale pour obtenir une finition uniforme.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eDéterminer la durée de vie en pot :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eSelon la quantité ajoutée, la durée de vie du pot variera :\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"2\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e5% Addition:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eEnviron 2 heures.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"2\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eAjout de 2,5 % :\u003c\/strong\u003e\u003cspan\u003e Environ 4 heures.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"2\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eAjout de 10 % :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eLa durée de vie du mélange est réduite à 20-30 minutes à moins d'être dilué avec de l'eau.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e3. Application\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eChoisissez votre méthode d'application :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eEnviroCat 100-LV peut être appliqué à l'aide d'équipements de pulvérisation (pulvérisateurs sans air, HVLP ou pulvérisateurs assistés par air), de pinceaux ou de rouleaux.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eAppliquer Uniformément :\u003c\/strong\u003e\u003cspan\u003e Assurez une couche uniforme en appliquant le mélange de manière uniforme sur la surface.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eSurveiller la durée de vie du mélange :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eTravaillez efficacement dans le délai de vie du pot pour éviter que le mélange ne gélifie.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003e4. Séchage et Durcissement\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eAir Dry:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eÀ 20°C (68°F), la finition est prête à être manipulée dans quelques heures. La durée de vie en pot peut être prolongée en maintenant un environnement frais.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cstrong\u003eFour conventionnel :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eÀ 40-45°C (104-113°F), les temps de séchage sont considérablement réduits, permettant une manipulation et un recouvrement plus rapides.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eÉvitez la surchauffe :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eLes températures supérieures à 80°F (27°C) peuvent réduire la durée de vie en pot, alors assurez-vous que votre espace de travail est bien contrôlé.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePrécautions de sécurité\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eProtection Respiratoire :\u003c\/strong\u003e\u003cspan\u003e EnviroCat 100-LV contient des isocyanates. Utilisez toujours un équipement de protection individuelle (EPI) approprié, y compris des respirateurs avec apport d'air frais lors des applications par pulvérisation.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eVentilation:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eAssurez une ventilation adéquate dans votre espace de travail pour éviter l'inhalation de fumées.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eHandling:\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eÉvitez tout contact avec la peau et les yeux. En cas de contact, rincez immédiatement à grande eau et consultez un médecin si nécessaire.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e\u003cspan\u003e Gardez les conteneurs bien fermés et conservez-les dans un endroit frais et sec, à l'abri de l'humidité et de la lumière directe du soleil.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eDurée de conservation et stockage\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eShelf Life:\u003c\/strong\u003e\u003cspan\u003e EnviroCat 100-LV a une durée de conservation de \u003c\/span\u003e\u003cspan\u003e8 mois\u003c\/span\u003e\u003cspan\u003e lorsqu'il est stocké dans des conteneurs non ouverts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-336fc05f-7fff-5bca-82cf-77a3a05849ef\"\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/b\u003eConditions de stockage :\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003eConservez dans un conteneur hermétiquement fermé à température ambiante (18-25°C \/ 64-75°F). Protégez de l'humidité, de la lumière directe du soleil et des matériaux étrangers. Ne pas conserver à des températures inférieures à 5°C (41°F).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003ePourquoi choisir EnviroCat 100-LV ?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEnviroCat 100-LV est conçu pour les menuisiers professionnels et les amateurs de bricolage au Canada et aux États-Unis qui exigent des performances élevées et une fiabilité de leurs produits de finition. Sa capacité à améliorer la dureté, la résistance chimique et le brillant en fait un ajout indispensable à votre trousse à outils de finition du bois. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePlus, sa formule écologique à faible teneur en COV garantit un espace de travail plus sûr sans compromettre la qualité.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePrêt à élever vos projets de finition du bois ?\u003c\/span\u003e\u003cspan\u003e Choisir \u003c\/span\u003e\u003cspan\u003eEnviroCat 100-LV Durcisseur à base d'eau\u003c\/span\u003e\u003cspan\u003e pour une durabilité supérieure, un éclat époustouflant et des résultats de qualité professionnelle à chaque fois. Commandez maintenant et faites l'expérience de la différence !\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEst-ce que l'EnviroCat 100-LV peut être utilisé avec n'importe quelle finition à base d'eau ?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eNon, il est conçu spécifiquement pour être utilisé avec les finitions à base d'eau Envirolak.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eQuelle est la durée de vie après le mélange ?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eLa durée de vie en pot varie de 2 à 6 heures en fonction de la quantité mélangée et de la température.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEst-ce qu'EnviroCat 100-LV augmente le niveau de brillance ?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eOui, cela peut augmenter la brillance de 5 à 10 %.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eEst-ce qu'EnviroCat 100-LV est écologique ?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eOui, c'est à base d'eau et a une faible teneur en COV.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eComment doit-on stocker EnviroCat 100-LV ?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eConservez dans un récipient hermétiquement fermé à 18-25°C, à l'abri de l'humidité et de la lumière directe du soleil.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"Default Title","offer_id":41323691900983,"sku":"CAT100-LV","price":85.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/EnviroCat100-LV.webp?v=1729159385"},{"product_id":"envirocat-150-crosslinker","title":"Envirolak EnviroCat 150 Crosslinker (ELCAT150)","description":"\u003ch2\u003eEnviroCat 150 Crosslinker for Water-Based Finishes\u003c\/h2\u003e\n\u003cp\u003eEnvirolak EnviroCat 150 Crosslinker (ELCAT150) is a high-performance crosslinker designed to improve the durability and performance of compatible Envirolak water-based finishes. When added to topcoats, ELCAT150 improves hardness, chemical resistance, scratch resistance and mar resistance for a tougher, longer-lasting finish.\u003c\/p\u003e\n\u003cp\u003eELCAT150 can also improve adhesion and water resistance when used with compatible Envirolak basecoats and primers. For vertical spray applications, the addition of EnviroCat 150 helps reduce orange peel and promotes a smoother, more uniform finish.\u003c\/p\u003e\n\u003cp\u003eUnlike conventional catalysts that may cause unused material to gel, coatings mixed with ELCAT150 remain usable after the crosslinker's effective period has passed. The functional crosslinking period is approximately 8–12 hours. After this period, unused coating can be re-crosslinked following Envirolak's recommended procedure.\u003c\/p\u003e\n\u003ch5\u003eKey Features\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eImproves finish hardness and durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEnhances chemical resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImproves scratch and mar resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHelps improve adhesion and water resistance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHelps reduce orange peel in vertical spraying\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePromotes a smoother, more uniform finish\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e8–12 hour functional crosslinking period\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMixed material does not gel after the functional period\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePreviously mixed material can be re-crosslinked\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupplied ready to use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eMixing \u0026amp; Application\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e Add ELCAT150 at 3% by weight to the compatible Envirolak coating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing:\u003c\/strong\u003e Stir thoroughly into the coating. Mechanical agitation is recommended whenever possible to ensure the crosslinker is completely and evenly incorporated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Apply the coating according to the instructions for the specific Envirolak primer, topcoat or sealer being used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Period:\u003c\/strong\u003e ELCAT150 provides approximately 8–12 hours of enhanced crosslinking performance after mixing. After this period, the coating remains usable but no longer receives the same enhanced performance from the original addition of crosslinker.\u003c\/p\u003e\n\u003ch5\u003eRe-Crosslinking Material\u003c\/h5\u003e\n\u003cp\u003eUnused material does not need to be discarded simply because the 8–12 hour functional crosslinking period has passed.\u003c\/p\u003e\n\u003cp\u003eTo re-crosslink previously mixed material, Envirolak recommends blending it \u003cstrong\u003e1:1 with fresh, uncatalyzed material\u003c\/strong\u003e, then adding ELCAT150 at \u003cstrong\u003e3% by weight\u003c\/strong\u003e to the combined mixture.\u003c\/p\u003e\n\u003cp\u003eAlways refer to the current Envirolak Technical Data Sheet for complete mixing and application instructions.\u003c\/p\u003e\n\u003ch5\u003eTechnical Information\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eProduct:\u003c\/strong\u003e EnviroCat 150 Crosslinker\u003cbr\u003e\u003cstrong\u003eProduct Code:\u003c\/strong\u003e ELCAT150\u003cbr\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 20 oz (680 g)\u003cbr\u003e\u003cstrong\u003eRecommended Addition:\u003c\/strong\u003e 3% by weight\u003cbr\u003e\u003cstrong\u003eFunctional Period:\u003c\/strong\u003e 8–12 hours\u003cbr\u003e\u003cstrong\u003eSpecific Gravity:\u003c\/strong\u003e 1.17 ± 2%\u003cbr\u003e\u003cstrong\u003eSolids Content:\u003c\/strong\u003e Approximately 88%\u003cbr\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e Approximately 2,000 cps\u003cbr\u003e\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 8 months in unopened containers\u003cbr\u003e\u003cstrong\u003eRecommended Storage:\u003c\/strong\u003e 18–25°C (64–75°F)\u003c\/p\u003e\n\u003ch5\u003eStorage\u003c\/h5\u003e\n\u003cp\u003eKeep EnviroCat 150 tightly sealed and stored at room temperature between 18–25°C (64–75°F). Protect the crosslinker from humidity, direct sunlight and contamination.\u003c\/p\u003e\n\u003cp\u003eELCAT150 reacts with moisture, which can reduce its effectiveness. Do not use the product if it becomes hazy, as this may indicate exposure to moisture.\u003c\/p\u003e\n\u003ch5 dir=\"ltr\"\u003e\u003cspan\u003eFrequently Asked Questions (FAQs)\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e1. What does EnviroCat 150 do?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eIt boosts the durability, hardness, and chemical resistance of water-based finishes, giving you a tougher, smoother coating.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e2. How much EnviroCat 150 should I add?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eAdd 3% by weight to your coating (e.g., 29 grams per quart for topcoats).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e3. How long is the pot life after mixing?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYou have 8-12 hours of enhanced performance after mixing. After that, the material is still usable but will not have the same boosted performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e4. Can I use EnviroCat 150 in all finishes?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003eEnviroCat 150 is designed for use with compatible Envirolak primers, topcoats, and sealers to improve coating performance. Always follow the recommendations for the specific Envirolak coating being used.\u003cbr\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003e5. What should I do if my crosslinked coating loses performance?\u003c\/strong\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYou can blend the mixed material 1:1 with fresh uncatalyzed material and then add EnviroCat 150 at 3% by weight to re-crosslink.\u003c\/span\u003e\u003c\/p\u003e","brand":"Envirolak","offers":[{"title":"20oz (680g)","offer_id":41995753947191,"sku":"ELCAT 150","price":134.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/EnviroCat150Crosslinker.png?v=1730691125"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/collections\/Lacquer_Paint_400X400_e1a24bb2-cf09-4932-8f17-1fabd045c3b8.jpg?v=1738271547","url":"https:\/\/thepaintpeople.com\/fr\/collections\/envirolak-revetements-en-bois.oembed","provider":"The Paint People","version":"1.0","type":"link"}