{"title":"Epoxies","description":"","products":[{"product_id":"ramuc-ep-epoxy-pool-paint","title":"Ramuc EP Epoxy Pool Paint","description":"\u003ch2\u003eRamuc EP Epoxy Pool Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRamuc EP Epoxy\u003c\/strong\u003e is a \u003cstrong\u003etwo-part epoxy pool paint\u003c\/strong\u003e that cures to a hard, tile-like high gloss. It resists stains, pool chemicals and abrasion, and it's made for concrete, plaster and fibreglass pools, spas and slides. EP is the like-for-like recoat for epoxy-painted pools, where it covers best, and Ramuc calls epoxies the paints of choice for indoor pools. Two coats give 3–4 years of service.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eHigh-gloss, tile-like finish.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStain, chemical and abrasion resistant.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePools, spas and slides,\u003c\/strong\u003e including fibreglass.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSelf-priming, two-coat system.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-hour pot life\u003c\/strong\u003e once mixed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eBare concrete, plaster and fibreglass, and pools previously painted with epoxy. \u003cem\u003eNot over rubber or acrylic pool paint (use \u003ca href=\"\/products\/ramuc-type-a-2-rubber-based-paint\"\u003eRamuc A-2\u003c\/a\u003e or \u003ca href=\"\/products\/ramuc-ds-acrylic-pool-paint\"\u003eRamuc DS\u003c\/a\u003e).\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eDawn Blue, White, Monument Gray, Aquagreen, Dark Blue, Royal Blue and Black, in 1-gallon kits (Part A and Part B). Use dark colours for accents only.\u003c\/p\u003e\n\u003ch3\u003eWhich Ramuc Pool Paint?\u003c\/h3\u003e\n\u003cp\u003eEP gives the highest gloss at a lower cost per kit and is ideal for recoating epoxy. \u003ca href=\"\/products\/ramuc-hi-build-epoxy-pool-paint-kit\"\u003eRamuc Hi-Build Epoxy\u003c\/a\u003e builds much thicker coats to smooth rough plaster and lasts up to 8 years.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Per 1-gal kit: 400–450 sq ft per coat on recoats and fibreglass, 175–200 on bare or rough surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2, self-priming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-part epoxy polyamide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2:1 by volume. Stand 30 min, or 60 below 18 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePot life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 hours at 21 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRecoat\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16–72 hours. Sand with 80–100 grit after 72 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFill\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5–7 days outdoors, 10–14 days indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–29 °C air, surface 10–32 °C, nights 10 °C or warmer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eService life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3–4 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e340 g\/L max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRamuc Thinner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepair, power wash and clean\u003c\/strong\u003e with Ramuc Clean \u0026amp; Prep. Sand hard or glossy spots with #80 grit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet it dry\u003c\/strong\u003e and pass the condensation test.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix 2:1,\u003c\/strong\u003e let it stand, then roll two coats 16–72 hours apart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure 5–7 days\u003c\/strong\u003e outdoors or 10–14 indoors, then fill.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow many kits of Ramuc EP do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. A 16 × 32 ft pool, 3½ ft at the shallow end and 8 ft at the deep end, has about 1,064 sq ft of walls and floor. At 400 sq ft per kit per coat, a recoat of existing epoxy takes 6 kits. Bare plaster soaks up the first coat at 175 sq ft per kit, so plan on 9.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat can EP go over?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBare concrete, plaster and fibreglass, or a pool already painted with epoxy, where it covers best. It doesn't go over rubber or acrylic pool paint.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I tell what paint is on my pool now?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eDo a solvent test. Wearing rubber gloves, clean and dry 3 or 4 spots, then rub each with a cotton ball soaked in a solvent, 4–5 passes, using a new spot each time. If denatured alcohol softens it, it's water-based acrylic. If xylene softens it, it's rubber or chlorinated rubber. If MEK softens it, it's epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use EP on a fibreglass pool or spa?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's made for concrete, plaster and fibreglass pools, spas and slides. Sand the gelcoat with #80 grit first. On fibreglass, a kit covers 400–450 sq ft per coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I mix it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eMix Part A and Part B separately for about 5 minutes each, then together 2:1 for about 15 minutes with a drill mixer, not a stir stick. Let it stand 30 minutes, or 60 below 18 °C, before you start. It stays usable for about 8 hours. For more than one kit, intermix them in a 5-gallon pail.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eDo I need to acid-etch the pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eNo. Ramuc Clean \u0026amp; Prep cleans, degreases, dissolves mineral deposits and opens up the surface in one step, replacing the old TSP, acid etch and TSP routine. Mix it 1 to 2 with water for bare plaster, or 1 to 5 for a painted pool, scrub, then triple rinse with a garden hose.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eIs epoxy good for an indoor pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. Ramuc says epoxies are the paints of choice for indoor pools because they cure chemically. Allow 10–14 days with good ventilation before you fill.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long before I can fill the pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOutdoors, 5–7 days after the final coat. Indoors, 10–14 days. Filling too soon can cause yellowing or a loss of gloss.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e9\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhen's the best time to paint a pool in Ontario?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eLate spring, before you open the pool, is the usual window. The air and the surface need to be between 10 °C and 32 °C, the nights have to stay above 10 °C so the paint cures, and rain can't be on the way. Then allow 5–7 days of curing outdoors before you fill.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"Ramuc","offers":[{"title":"Gloss \/ Kit \/ Dawn Blue","offer_id":39300141678647,"sku":"908132801","price":234.0,"currency_code":"CAD","in_stock":true},{"title":"Gloss \/ Kit \/ White","offer_id":39300141580343,"sku":"908131101","price":234.0,"currency_code":"CAD","in_stock":true},{"title":"Gloss \/ Kit \/ Monument Gray","offer_id":39739405434935,"sku":"908136201","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"Gloss \/ Kit \/ Aquagreen","offer_id":39300141776951,"sku":"908130001","price":234.0,"currency_code":"CAD","in_stock":true},{"title":"Gloss \/ Kit \/ Dark Blue","offer_id":39300141809719,"sku":"908130301","price":237.0,"currency_code":"CAD","in_stock":true},{"title":"Gloss \/ Kit \/ Royal Blue","offer_id":39300141711415,"sku":"908132901","price":227.0,"currency_code":"CAD","in_stock":true},{"title":"Gloss \/ Kit \/ Black","offer_id":39300141645879,"sku":"908132101","price":246.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/Ramuc_ep-epoxy-new.png?v=1653060789"},{"product_id":"insl-x-epoxy-swimming-pool-paint","title":"INSL-X Epoxy Swimming Pool Paint, 2-Gallon Kit","description":"\u003ch2\u003eINSL-X Epoxy Swimming Pool Paint\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eINSL-X Epoxy Pool Coating (IG-4000)\u003c\/strong\u003e is a \u003cstrong\u003etwo-part polyamide epoxy pool paint\u003c\/strong\u003e with a semi-gloss finish. It's extremely durable in fresh and salt water and resists common pool chemicals, including chlorine. It goes on concrete, plaster, marcite, gunite, fibreglass and steel, or over an existing 2-part epoxy. Each 2-gallon kit is Part A and Part B, mixed 1:1.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe toughest INSL-X pool paint,\u003c\/strong\u003e with the most chemical resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFibreglass and steel\u003c\/strong\u003e as well as concrete and plaster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide recoat window\u003c\/strong\u003e of 3–72 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFresh or salt water,\u003c\/strong\u003e and resists chlorine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-gallon kits,\u003c\/strong\u003e 700–800 sq ft per coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere to Use It\u003c\/h3\u003e\n\u003cp\u003eConcrete, plaster, marcite, gunite, fibreglass and steel pools, bare or previously coated with a 2-part epoxy. \u003cem\u003eNot over rubber, chlorinated rubber or water-based pool paint (use \u003ca href=\"\/products\/insl-x-rubber-based-swimming-pool-paint-rp-satin-finish-3-79l\"\u003eINSL-X Rubber Based\u003c\/a\u003e or \u003ca href=\"\/products\/insl-x-waterborne-swimming-pool-paint\"\u003eINSL-X Waterborne\u003c\/a\u003e). Not for stainless steel, aluminum, galvanized or vinyl-lined pools, hot tubs or spas.\u003c\/em\u003e Like any epoxy, it chalks and fades over time in sunlight.\u003c\/p\u003e\n\u003ch3\u003eColours and Sizes\u003c\/h3\u003e\n\u003cp\u003eReady-mixed in White, Black, Ocean Blue and Royal Blue, in 2-gallon kits (Part A and Part B).\u003c\/p\u003e\n\u003ch3\u003eWhich INSL-X Pool Paint?\u003c\/h3\u003e\n\u003cp\u003eChoose Epoxy for an epoxy-painted pool, for fibreglass or steel, or for the most chemical resistance. For a rubber pool, use \u003ca href=\"\/products\/insl-x-rubber-based-swimming-pool-paint-rp-satin-finish-3-79l\"\u003eINSL-X Rubber Based\u003c\/a\u003e. Not sure what's there? \u003ca href=\"\/products\/insl-x-waterborne-swimming-pool-paint\"\u003eINSL-X Waterborne\u003c\/a\u003e goes over most coatings.\u003c\/p\u003e\n\u003ch5\u003eSpecs \u0026amp; Coverage\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 350–400 sq ft per gallon per coat, or 700–800 per 2-gal kit. Plan on 250–300 per gallon for the first coat on bare plaster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e 2 thin coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2-part polyamide epoxy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSemi-gloss, 40–50 @ 60°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePot life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 h at 25 °C, 3 h at 32 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDry time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTouch 2 h. Recoat 3–72 h. Sand with 150–180 grit after 72 h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFill\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7 days outdoors, 14 days indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply at\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10–38 °C (50–100 °F), air, surface and paint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUnder 340 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eClean-up\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eXylene or epoxy thinner, then warm soapy water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch5\u003eApplication Guide\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm it's epoxy\u003c\/strong\u003e with an MEK test, then drain and clean with a citrus degreaser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare plaster:\u003c\/strong\u003e etch, neutralize, rinse three times and dry 3 days. \u003cstrong\u003eEpoxy or fibreglass:\u003c\/strong\u003e sand, rinse and dry 24 hours. \u003cstrong\u003eSteel:\u003c\/strong\u003e remove rust and prime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix 1:1,\u003c\/strong\u003e wait 30 minutes, then roll two thin coats 3–72 hours apart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure 7 days\u003c\/strong\u003e outdoors or 14 indoors with fans running, then fill.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eFAQ\u003c\/h5\u003e\n\u003cdiv class=\"tpp-faq\"\u003e\n\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e1\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow many kits do I need?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eUse the calculator above. A 16 × 32 ft pool, 3½ ft at the shallow end and 8 ft at the deep end, has about 1,064 sq ft of walls and floor. Two coats at 350 sq ft per gallon is just over 6 gallons, so plan on 4 kits. Bare plaster also comes to 4 kits.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e2\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eWhat can it go over?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eOnly bare surfaces or an existing 2-part epoxy: concrete, plaster, marcite, gunite, fibreglass and steel. It doesn't go over rubber, chlorinated rubber or water-based pool paint. If there are 4 or more old layers, strip it back first.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e3\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I tell what paint is on my pool now?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eDo a solvent test. Wearing rubber gloves, clean and dry 3 or 4 spots, then rub each with a cotton ball soaked in a solvent, 4–5 passes, using a new spot each time. If denatured alcohol softens it, it's water-based acrylic. If xylene softens it, it's rubber or chlorinated rubber. If MEK softens it, it's epoxy.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e4\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eCan I use it on a fibreglass or steel pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eYes. It's the INSL-X pool paint for both. Scuff sand fibreglass with 150–180 grit. On steel, remove the rust and prime with an epoxy primer first. It's not for stainless steel, aluminum or galvanized pools, vinyl liners, hot tubs or spas.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e5\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow do I mix it?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eStir Part A and Part B separately, then combine them 1:1 by volume and mix well. Let it stand 30 minutes before you start. It stays usable for about 6 hours at 25 °C, or 3 hours at 32 °C, so only mix what you can roll in that time. Never mix part of a kit.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e6\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long between coats?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003e3–72 hours. If more than 72 hours pass, sand with 150–180 grit before the second coat.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e7\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long before I can fill the pool?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eWait at least 7 days after the final coat for an outdoor pool, or 14 days indoors. Run fans across the pool and one pointed down into the deep end, and never cover it with a tarp or solar blanket while it cures. If rain gets in before it's cured, pump it out as soon as you can.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails\u003e\u003csummary\u003e\u003cspan class=\"tpp-num\"\u003e8\u003c\/span\u003e\u003cspan class=\"tpp-q\"\u003eHow long will a painted pool last?\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"tpp-a\"\u003e\u003cp\u003eBenjamin Moore says to expect about 3 to 5 years before repainting. Chlorine levels, sun, climate, how many coats went on and how much the pool gets used all play a part. Check the finish each fall when you close the pool, and add shock through the skimmer or a chlorinator so concentrated chlorine never sits on the paint.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","brand":"INSL-X","offers":[{"title":"2 Gal Kit \/ White","offer_id":39364010541111,"sku":"IG4010S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true},{"title":"2 Gal Kit \/ Black","offer_id":39364010606647,"sku":"IG4020S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true},{"title":"2 Gal Kit \/ Ocean Blue","offer_id":39364010639415,"sku":"IG4042S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true},{"title":"2 Gal Kit \/ Royal Blue","offer_id":39364010672183,"sku":"IG4024S9F-2K","price":298.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/products\/INSL-X-Epoxy-Swimming-Pool-Paint-IG-Semi-Gloss-Finish-2-Gal-Kit.png?v=1681867319"},{"product_id":"benjamin-moore-hp4000-polyamide-epoxy","title":"HP4000 High Performance Polyamide Epoxy – Industrial Gloss Coating","description":"\u003ch2 data-start=\"765\" data-end=\"958\"\u003eIndustrial-Grade Polyamide Epoxy Coating Built for Extreme Durability \u0026amp; Chemical Resistance\u003c\/h2\u003e\n\u003cp data-start=\"765\" data-end=\"958\"\u003eThe \u003cstrong data-start=\"769\" data-end=\"810\"\u003eBenjamin Moore HP4000 Polyamide Epoxy\u003c\/strong\u003e is a \u003cstrong data-start=\"816\" data-end=\"872\"\u003eprofessional-grade, two-component industrial coating\u003c\/strong\u003e engineered for \u003cstrong data-start=\"888\" data-end=\"957\"\u003eextreme durability, chemical resistance, and long-term protection\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"960\" data-end=\"1163\"\u003eDesigned for \u003cstrong data-start=\"973\" data-end=\"1030\"\u003efloors, structural steel, machinery, tanks, and walls\u003c\/strong\u003e, HP4000 delivers a \u003cstrong data-start=\"1050\" data-end=\"1084\"\u003etough, cross-linked epoxy film\u003c\/strong\u003e that stands up to \u003cstrong data-start=\"1103\" data-end=\"1162\"\u003eharsh industrial environments, solvents, and heavy wear\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"1165\" data-end=\"1287\"\u003eIdeal for contractors, facility managers, and maintenance teams who need \u003cstrong data-start=\"1238\" data-end=\"1286\"\u003ereliable performance in demanding conditions\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2 data-section-id=\"12bzp5j\" data-start=\"1294\" data-end=\"1328\"\u003eKey Features \u0026amp; Benefits of HP4000 Industrial Epoxy Coating\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"8l75ov\" data-start=\"397\" data-end=\"621\"\u003e\n\u003cstrong data-start=\"399\" data-end=\"449\"\u003eExtreme Durability for Industrial Environments\u003c\/strong\u003e – Forms a cross-linked epoxy film designed to handle heavy traffic, impact, and demanding conditions found in warehouses, manufacturing facilities, and commercial floors\u003c\/li\u003e\n\u003cli data-section-id=\"pmc2ia\" data-start=\"622\" data-end=\"822\"\u003e\n\u003cstrong data-start=\"624\" data-end=\"666\"\u003eAdvanced Chemical \u0026amp; Solvent Resistance\u003c\/strong\u003e – Engineered for exposure to acids, alkalis, fuels, and harsh cleaners, making it ideal for chemical-resistant coating applications on concrete and steel\u003c\/li\u003e\n\u003cli data-section-id=\"d4snow\" data-start=\"823\" data-end=\"1004\"\u003e\n\u003cstrong data-start=\"825\" data-end=\"859\"\u003eSuitable for Immersion Service\u003c\/strong\u003e – Perfect for tanks, containment areas, and other environments requiring a reliable epoxy tank lining or continuous liquid exposure protection\u003c\/li\u003e\n\u003cli data-section-id=\"blewvc\" data-start=\"1005\" data-end=\"1179\"\u003e\n\u003cstrong data-start=\"1007\" data-end=\"1043\"\u003eHigh-Gloss, Easy-to-Clean Finish\u003c\/strong\u003e – Creates a smooth, sanitary surface commonly required for commercial garage floors, food processing areas, and industrial workspaces\u003c\/li\u003e\n\u003cli data-section-id=\"1d2lrbi\" data-start=\"1180\" data-end=\"1356\"\u003e\n\u003cstrong data-start=\"1182\" data-end=\"1208\"\u003eMulti-Surface Adhesion\u003c\/strong\u003e – Bonds to concrete, masonry, structural steel, galvanized metal, and previously coated surfaces, making it a versatile protective coating system\u003c\/li\u003e\n\u003cli data-section-id=\"l1can9\" data-start=\"1357\" data-end=\"1523\"\u003e\n\u003cstrong data-start=\"1359\" data-end=\"1398\"\u003eHigh-Build, High-Solids Performance\u003c\/strong\u003e – Delivers excellent film thickness and coverage, reducing the need for multiple coats in high-build epoxy coating systems\u003c\/li\u003e\n\u003cli data-section-id=\"1xtlwai\" data-start=\"1524\" data-end=\"1696\"\u003e\n\u003cstrong data-start=\"1526\" data-end=\"1569\"\u003eOptimized for Industrial Floor Coatings\u003c\/strong\u003e – Ideal for warehouse floor coatings, service bays, and production environments where durability and performance matter most\u003c\/li\u003e\n\u003cli data-section-id=\"1ssi1a8\" data-start=\"1697\" data-end=\"1842\"\u003e\n\u003cstrong data-start=\"1699\" data-end=\"1747\"\u003eCFIA Approved for Food Processing Facilities\u003c\/strong\u003e – Suitable for regulated environments requiring safe, durable, and easy-to-maintain coatings\u003c\/li\u003e\n\u003cli data-section-id=\"iqqpfc\" data-start=\"1843\" data-end=\"2001\"\u003e\n\u003cstrong data-start=\"1845\" data-end=\"1879\"\u003eProfessional-Grade Performance\u003c\/strong\u003e – Designed for contractors, facility managers, and maintenance teams needing a long-lasting industrial coating solution\u003c\/li\u003e\n\u003cli data-end=\"376\" data-start=\"255\" data-section-id=\"1vc8huw\"\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBest Uses\u003c\/h2\u003e\n\u003cp data-start=\"2144\" data-end=\"2164\"\u003eHP4000 is ideal for:\u003c\/p\u003e\n\u003cul data-start=\"2166\" data-end=\"2422\"\u003e\n\u003cli data-section-id=\"1ppjl78\" data-start=\"2166\" data-end=\"2200\"\u003eIndustrial floors \u0026amp; warehouses\u003c\/li\u003e\n\u003cli data-section-id=\"1ncoyoa\" data-start=\"2201\" data-end=\"2240\"\u003eManufacturing equipment \u0026amp; machinery\u003c\/li\u003e\n\u003cli data-section-id=\"q8eceh\" data-start=\"2241\" data-end=\"2281\"\u003eStructural steel \u0026amp; metal fabrication\u003c\/li\u003e\n\u003cli data-section-id=\"1mvfmjb\" data-start=\"2282\" data-end=\"2315\"\u003eConcrete and masonry surfaces\u003c\/li\u003e\n\u003cli data-section-id=\"1xedstf\" data-start=\"2316\" data-end=\"2352\"\u003eTanks and immersion environments\u003c\/li\u003e\n\u003cli data-section-id=\"1faqyzm\" data-start=\"2353\" data-end=\"2383\"\u003eFood processing facilities\u003c\/li\u003e\n\u003cli data-section-id=\"c9wgxb\" data-start=\"2384\" data-end=\"2422\"\u003eCommercial garages \u0026amp; service areas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-section-id=\"1vlp3as\" data-start=\"4336\" data-end=\"4386\"\u003e\u003cspan role=\"text\"\u003eWhy Choose Benjamin Moore HP4000 Epoxy?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp data-start=\"4388\" data-end=\"4441\"\u003eCompared to standard epoxy coatings, HP4000 delivers:\u003c\/p\u003e\n\u003cul data-start=\"4443\" data-end=\"4740\"\u003e\n\u003cli data-section-id=\"zyjy8m\" data-start=\"4443\" data-end=\"4477\"\u003e\u003cstrong data-start=\"4445\" data-end=\"4475\"\u003eHigher chemical resistance\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"owdair\" data-start=\"4478\" data-end=\"4575\"\u003e\u003cstrong data-start=\"4480\" data-end=\"4533\"\u003eSuperior adhesion and durability (ASTM 5B rating)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"3pmmwe\" data-start=\"4576\" data-end=\"4693\"\u003e\u003cstrong data-start=\"4578\" data-end=\"4651\"\u003eProven industrial performance (1000-hour salt spray \u0026amp; humidity tests)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"10gv6er\" data-start=\"4694\" data-end=\"4740\"\u003e\u003cstrong data-start=\"4696\" data-end=\"4738\"\u003eVersatility across multiple substrates\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"4742\" data-end=\"4863\"\u003eIt’s a \u003cstrong data-start=\"4749\" data-end=\"4814\"\u003etrusted solution for contractors and industrial professionals\u003c\/strong\u003e who demand long-term protection and performance.\u003c\/p\u003e\n\u003ch5 data-section-id=\"t2h4yg\" data-start=\"2429\" data-end=\"2464\"\u003e\u003cspan role=\"text\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul data-start=\"2466\" data-end=\"3199\"\u003e\n\u003cli data-section-id=\"12qtgni\" data-start=\"2466\" data-end=\"2509\"\u003e\n\u003cstrong data-start=\"2468\" data-end=\"2477\"\u003eType:\u003c\/strong\u003e Polyamide Epoxy (2-component)\u003c\/li\u003e\n\u003cli data-section-id=\"ipnru\" data-start=\"2510\" data-end=\"2590\"\u003e\n\u003cstrong data-start=\"2512\" data-end=\"2526\"\u003eMix Ratio:\u003c\/strong\u003e 1:1 (pre-measured kits)\u003c\/li\u003e\n\u003cli data-section-id=\"1nzxzq3\" data-start=\"2591\" data-end=\"2644\"\u003e\n\u003cstrong data-start=\"2593\" data-end=\"2612\"\u003eFinish Options:\u003c\/strong\u003e Gloss, Semi-Gloss, High-Build\u003c\/li\u003e\n\u003cli data-section-id=\"6ce7qz\" data-start=\"2645\" data-end=\"2712\"\u003e\n\u003cstrong data-start=\"2647\" data-end=\"2665\"\u003eVolume Solids:\u003c\/strong\u003e 62–66%\u003c\/li\u003e\n\u003cli data-section-id=\"1q04u4p\" data-start=\"2713\" data-end=\"2860\"\u003e\n\u003cstrong data-start=\"2715\" data-end=\"2728\"\u003eCoverage:\u003c\/strong\u003e\n\u003cul data-start=\"2733\" data-end=\"2860\"\u003e\n\u003cli data-section-id=\"1oqmbua\" data-start=\"2733\" data-end=\"2776\"\u003e400–500 sq. ft. per gallon (Gloss\/Semi)\u003c\/li\u003e\n\u003cli data-section-id=\"1td48g7\" data-start=\"2779\" data-end=\"2860\"\u003e200–250 sq. ft. per gallon (High-Build)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"p7m9ap\" data-start=\"2861\" data-end=\"2995\"\u003e\n\u003cstrong data-start=\"2863\" data-end=\"2876\"\u003eDry Time:\u003c\/strong\u003e\n\u003cul data-start=\"2881\" data-end=\"2995\"\u003e\n\u003cli data-section-id=\"1a7cb4i\" data-start=\"2881\" data-end=\"2899\"\u003eTouch: 6 hours\u003c\/li\u003e\n\u003cli data-section-id=\"lrgztq\" data-start=\"2902\" data-end=\"2925\"\u003eRecoat: 10–12 hours\u003c\/li\u003e\n\u003cli data-section-id=\"yvwv6i\" data-start=\"2928\" data-end=\"2995\"\u003eFoot Traffic: 24–48 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"ox54y6\" data-start=\"2996\" data-end=\"3104\"\u003e\n\u003cstrong data-start=\"2998\" data-end=\"3012\"\u003eFull Cure:\u003c\/strong\u003e\n\u003cul data-start=\"3017\" data-end=\"3104\"\u003e\n\u003cli data-section-id=\"13u6z09\" data-start=\"3017\" data-end=\"3040\"\u003eLight use: 72 hours\u003c\/li\u003e\n\u003cli data-section-id=\"1snqcev\" data-start=\"3043\" data-end=\"3104\"\u003eHeavy use: 7 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"ju80qh\" data-start=\"3105\" data-end=\"3125\"\u003e\n\u003cstrong data-start=\"3107\" data-end=\"3115\"\u003eVOC:\u003c\/strong\u003e 324 g\/L\u003c\/li\u003e\n\u003cli data-section-id=\"1lo9698\" data-start=\"3126\" data-end=\"3199\"\u003e\n\u003cstrong data-start=\"3128\" data-end=\"3141\"\u003ePot Life:\u003c\/strong\u003e ~7 hours @ 25°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-section-id=\"171h4xo\" data-start=\"3206\" data-end=\"3237\"\u003e\u003cspan role=\"text\"\u003eApplication Overview\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul data-start=\"3239\" data-end=\"3640\"\u003e\n\u003cli data-section-id=\"1o3t0jg\" data-start=\"3239\" data-end=\"3334\"\u003e\n\u003cstrong data-start=\"3241\" data-end=\"3262\"\u003ePreferred Method:\u003c\/strong\u003e Airless spray (.015–.019 tip)\u003c\/li\u003e\n\u003cli data-section-id=\"1nig8zy\" data-start=\"3335\" data-end=\"3380\"\u003e\n\u003cstrong data-start=\"3337\" data-end=\"3362\"\u003eAlso Compatible With:\u003c\/strong\u003e Brush or roller\u003c\/li\u003e\n\u003cli data-section-id=\"10tapcn\" data-start=\"3381\" data-end=\"3466\"\u003e\n\u003cstrong data-start=\"3383\" data-end=\"3402\"\u003eInduction Time:\u003c\/strong\u003e 30 minutes before use\u003c\/li\u003e\n\u003cli data-section-id=\"futrb1\" data-start=\"3467\" data-end=\"3539\"\u003e\n\u003cstrong data-start=\"3469\" data-end=\"3486\"\u003eSurface Prep:\u003c\/strong\u003e Clean, dry, and properly profiled surface required\u003c\/li\u003e\n\u003cli data-section-id=\"1bwlu38\" data-start=\"3540\" data-end=\"3640\"\u003e\n\u003cstrong data-start=\"3542\" data-end=\"3557\"\u003eDo Not Thin\u003c\/strong\u003e – Designed for optimal performance as-is\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 data-section-id=\"1a37cre\" data-start=\"3647\" data-end=\"3689\"\u003e\u003cspan role=\"text\"\u003eChemical Resistance Performance\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp data-start=\"3691\" data-end=\"3733\"\u003eHP4000 offers \u003cstrong data-start=\"3705\" data-end=\"3729\"\u003eexcellent resistance\u003c\/strong\u003e to:\u003c\/p\u003e\n\u003cul data-start=\"3735\" data-end=\"3879\"\u003e\n\u003cli data-section-id=\"1k99g2j\" data-start=\"3735\" data-end=\"3757\"\u003eFresh \u0026amp; salt water\u003c\/li\u003e\n\u003cli data-section-id=\"1dqowsi\" data-start=\"3758\" data-end=\"3770\"\u003eSolvents\u003c\/li\u003e\n\u003cli data-section-id=\"1ppjl45\" data-start=\"3771\" data-end=\"3804\"\u003eAcidic and alkaline solutions\u003c\/li\u003e\n\u003cli data-section-id=\"li71yf\" data-start=\"3805\" data-end=\"3879\"\u003eIndustrial chemicals and fuels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"3881\" data-end=\"3969\"\u003eThis makes it a \u003cstrong data-start=\"3897\" data-end=\"3968\"\u003etop choice for demanding industrial coatings and protective systems\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch5 data-section-id=\"611fmg\" data-start=\"3976\" data-end=\"4008\"\u003e\u003cspan role=\"text\"\u003e Important Limitations\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul data-start=\"4010\" data-end=\"4329\"\u003e\n\u003cli data-section-id=\"152s2jv\" data-start=\"4010\" data-end=\"4127\"\u003eNot UV stable – may \u003cstrong data-start=\"4032\" data-end=\"4063\"\u003echalk or yellow in sunlight\u003c\/strong\u003e (topcoat recommended)\u003c\/li\u003e\n\u003cli data-section-id=\"daao0x\" data-start=\"4128\" data-end=\"4221\"\u003eMinimum application temperature: \u003cstrong data-start=\"4163\" data-end=\"4179\"\u003e7.2°C (45°F)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1y0stvl\" data-start=\"4222\" data-end=\"4285\"\u003eNot suitable for decorative exterior use without protection\u003c\/li\u003e\n\u003cli data-section-id=\"2usiob\" data-start=\"4286\" data-end=\"4329\"\u003eProfessional-use product (PPE required)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Benjamin Moore","offers":[{"title":"2-Gallon Kit \/ Semi-Gloss \/ Black","offer_id":42208338182199,"sku":"HP4000-BK-KIT-SG","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Semi-Gloss \/ Silver Gray","offer_id":42208337985591,"sku":"HP4000-SG-KIT-SG","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Semi-Gloss \/ Battleship Gray","offer_id":42208338083895,"sku":"HP4000-BG-KIT-SG","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Semi-Gloss \/ Safety Red","offer_id":42208337887287,"sku":"HP4000-SR-KIT-SG","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Semi-Gloss \/ Safety Yellow","offer_id":42225650794551,"sku":"HP4000-SY-KIT-SG","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Gloss \/ Black","offer_id":42208338214967,"sku":"HP4000-BK-KIT-GL","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Gloss \/ Silver Gray","offer_id":42208338018359,"sku":"HP4000-SG-KIT-GL","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Gloss \/ Safety Red","offer_id":42208337920055,"sku":"HP4000-SR-KIT-GL","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Gloss \/ Safety Yellow","offer_id":42208337821751,"sku":"HP4000-SY-KIT-GL","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ Gloss \/ Battleship Gray","offer_id":42208338116663,"sku":"HP4000-BG-KIT-GL","price":255.47,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ High-Build (Gloss) \/ Black","offer_id":42208338247735,"sku":"HP4000-BK-KIT-HBG","price":284.0,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ High-Build (Gloss) \/ Silver Gray","offer_id":42208338051127,"sku":"HP4000-SG-KIT-HBG","price":284.0,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ High-Build (Gloss) \/ Safety Red","offer_id":42208337952823,"sku":"HP4000-SR-KIT-HBG","price":284.0,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ High-Build (Gloss) \/ Safety Yellow","offer_id":42208337854519,"sku":"HP4000-SY-KIT-HBG","price":284.0,"currency_code":"CAD","in_stock":true},{"title":"2-Gallon Kit \/ High-Build (Gloss) \/ Battleship Gray","offer_id":42208338149431,"sku":"HP4000-BG-KIT-HBG","price":284.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0062\/5400\/2231\/files\/benjamin-moore-hp4000-polyamide-epoxy-kit-industrial-coating.jpg?v=1778012465"}],"url":"https:\/\/thepaintpeople.com\/collections\/epoxies.oembed","provider":"The Paint People","version":"1.0","type":"link"}